Frank Lübeck writes:
>
> Dear voyage experts,
>
> I'm trying to evaluate a new Ayre QB9 using an Alix 3D3 board with voyage
> linux. But I don't get started. I first want to get the USB Audio 1.0
> interface (up to 96/24) running. I'm using this board since quite some time
> to feed a Trends
Hello Kenny,
Interesting product you've got!! On the other hand also a bit depressing
because this means that there is less incentive for Meridian to release
a Linux MQA decoder (assuming that's possible). Anyways, that's not your
problem since you've already got an MQA capable Meridian DAC.
As
interrupts
TLB: 0 TLB shootdowns
ERR: 3
MIS: 0
On 17/12/15 21:29, Muffinman wrote:
> Hello all,
>
> I've been running Voyage 0.10.0 for a while but unfortunately it doesn't
> run very smooth compared to 0.7.5. It's running on a Soekris net5501.
> With no
Hello all,
I've been running Voyage 0.10.0 for a while but unfortunately it doesn't
run very smooth compared to 0.7.5. It's running on a Soekris net5501.
With normal 44.1 files its running fine but with higher resolutions it
stutters/distorts every few seconds or so, quite annoying.
I've loaded
On 21/07/15 15:32, chezmichaelng wrote:
Hi Punky,
looks like voyage mpd cannot detect USB of the NUC
Hello chezmichaelng,
Was the dac powered on while you booted Voyage? I found that
/etc/modprobe.d/alsa-base.conf is a bit limited out of the box. This
causes dac's to be recognized only on
On 21/07/15 15:59, Muffinman wrote:
I took the contents of this file from a previous Voyage MPD version, now
it works fine for me, see the below.
One note: the following should be three lines (beginning with 'install')
instead of the wrapped
versions...
install snd /sbin/modprobe --ignore
On 26-04-14 22:28, Lars wrote:
Hello.
This seems very interesting, i have a bryston bdp-1
And a cary cinema 11a, both have rs232.
would it be poossible to configure the bdp-1 to control
volume on the cary diectly via rs232. I
Hello Lars,
Controlling the amplifier shouldn't be a problem.
regards
Lars
8. mai 2014 kl. 10:54 skrev Muffinman n...@koster.tk
mailto:n...@koster.tk:
On 26-04-14 22:28, Lars wrote:
Hello.
This seems very interesting, i have a bryston bdp-1
And a cary cinema 11a, both have rs232.
would it be poossible to configure the bdp-1 to control
volume
Hello all,
A while back I asked on this mailinglist on how to control volume of an
amplifier via MPD through a serial connection (rs232/ttl). Time passed
without an answer, so I did some digging and learned C. While building
the app I figured I might as well expand compatibility. While it doesn't
On 14-08-13 06:13, tgmosher2000 wrote:
I've about given up on voyage-mpd and if I don't get this figured out,
the Alix 3D2 goes on ebay and I go back to raspyfi which works with no
problems.
I'm afraid something went wrong on the mailinglist. Only now all
messages of the past month seem to get
Howdy all,
Recently I've upgraded from Voygage MPD 0.7.5 to 0.9.0 (Soekris 5501).
For the most part it works wonderfully. However, while under 0.7.5 the
system operated flawlessly, under 0.9.0 the music stutters once every
couple of minutes. There is no real constant interval there. Also when
Hello all,
I figured it might be better to start a new topic with more clear
problem and subject line. What I thought was the problem, apparently
wasn't the problem.
All dpkg and apt-get commands fail like below. The files are downloaded
properly but then it prints the usage of scp as if it is
Hello all,
Already a long time I've seen the warnings below pass by. I didn't
bother them and they didn't bother me, that is, until yesterday. I need
to make and install some C/Perl application and all fails due to these
'warnings'.
perl: warning: Setting locale failed.
perl: warning: Please
Hello all,
Is it possible to create a virtual volume control that I can control
from MPD but without it actually affecting the data send to my USB dac?
Basically, I want the volume control to be totally dysfunctional except
for remembering its level. I want to write an application that can
listen
Hello,
I have no experience with the 4801 but I do have with the 5501. It's
driver was modified by ON7LDS for the 5501 based on the 4801 driver by
Meduna/Hejl. I created a minor patch for the ON7LDS driver to update to
to kernel 2.6.38. As its package also included the original 4801 driver
I also
.
We have a few users using QB-9 without problem. They can provide more
accurate answer if I am wrong.
Regards,
Punky
On 2/2/2012 4:22 AM, Muffinman wrote:
Howdy all,
I've got a Soekris net5501 running Voyage MPD 7.5, a custom kernel and
the Ayre QB-9. For the most part it is running very
Howdy all,
I've got a Soekris net5501 running Voyage MPD 7.5, a custom kernel and
the Ayre QB-9. For the most part it is running very well, except for one
thing that is. The QB9 is not recognized at boot. I have to unplug the
machine and plug it back in before it is recognized. The strange thing
On 26-08-11 18:05, Muffinman wrote:
If so, any thoughts on the error:
###
@CONFIG_SND_KERNELSRC@/include/linux/pci_ids.h: No such file or directory
###
There seem to be a few bugs in the Ubuntu alsa-source package, see the
link below. Though
On 26-08-11 11:02, Kim-man 'Punky' TSE wrote:
Hi Maarten,
The config-2.6.38-voyage does not includes ALSA sound driver, the
drivers are compiled out of the kernel source using alsa-source package.
Hello Punky,
I've installed the new kernel with headers through dpkg -i, I've done
'apt-get
On 26-08-11 11:02, Kim-man 'Punky' TSE wrote:
Hi Maarten,
The config-2.6.38-voyage does not includes ALSA sound driver, the
drivers are compiled out of the kernel source using alsa-source package.
Hello Punky,
I've installed the new kernel with headers through dpkg -i, I've done
'apt-get
Howdy all,
I've compiled a few kernels for Voyage-MPD 0.7.5 the past week and there
persists an issue with the sound kernel modules. In the new kernel some
modules are missing, such as: snd_seq, snd_rawmidi, a.o. They are not
started at boot and when I try to start them manually it says the
Dear all,
Currently I am trying to decide on what machine I will run Voyage + MPD to feed
my QB-9 with music. I've set my eye on the Soekris net5501, 500MHz, 512GB,
USB2.0, Sata. I think this is my best option as I want to connect a 3.5
sata-hdd to it (just for the music files not the OS). Since
jegunn jeg@... writes:
Some more info on the sequencing: On the C7 machine, the results are not
consistent. There seems no way to be sure it will work; usually
(re-)booting with both the computer and the QB9 powered up and connected
works, but not always. Interestingly, it seems to be
Frank Lübeck frank@... writes:
Dear voyage experts,
I'm trying to evaluate a new Ayre QB9 using an Alix 3D3 board with voyage
linux. But I don't get started. I first want to get the USB Audio 1.0
interface (up to 96/24) running. I'm using this board since quite some time
to feed a
24 matches
Mail list logo
