Hello Punky,
Is it possible to install Voyage MPD to a USB memory stick? I have a PC
having a mSata and a SSD. When i compared the sound of USB stick with Msata
i would find USB stick is better. I think that mSata is operating in high
frequency that will make much noise.
I'm looking forward to
Hello Voyage Users,
I use a mini PC - Fujitsu Futro s450 (
http://sp.ts.fujitsu.com/dmsp/Publications/public/ds-FUTRO-S450-2.pdf) with
newest avalable BIOS - as audio player. Till today I've used VoyageMPD
0.9.5 which works perfectly. A few days ago I decided to upgrade it to
newest version
On 12/19/2014 8:17 PM, Felix Hosner wrote:
Hi
How can I automate the voyage Linux installation? Where can I find this
information?
voyage.update -i -h
Felix
--
Regards,
Kim-man Punky Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD
Hi
How can I automate the voyage Linux installation? Where can I find this
information?
Thank you for your feedback
Felix
--
*Notabene: *
Die Zukunft soll man nicht voraussehen wollen, sondern möglich machen.
Antoine de Saint Exupéry (1900-44), frz. Flieger u. Schriftsteller
*Computer Coach
I have an Alix2d13 and want it to boot from CF and then use a HDD,
external USB HDD, for directories that either receives frequent writes
or needs much space. My candidates are /usr, /var, /tmp and /home.
With this setup I do not think I would need the default Voyage
directory synchronisation,
Hej Steve,
looking at my sources.list, not many differences can be seen. Only that
I am actually have set the source pointing to the mirror site and that I
uncomment my local mirror for debian.
Sources.list:
deb http://ftp.tw.debian.org/debian/ lenny main contrib
deb http://security.debian.org/
That did not correct the problem either.
Steve
On Thu, 04 Nov 2010 19:25:50 -0700, Kim-man 'Punky' TSE
punky...@punknix.com wrote:
Hi Steve,
At last, try ide_core.nodma=0.0 all_generic_ide
Regards,
Punky
On 11/5/2010 7:47 AM, Steve Taylor wrote:
I added ide-core.nodma=0.0 and =0.1 and I
I am in the US so I enabled the us mirror site in the list but the error
still persists.
I searched the archives and so far have not found this same problem
reported.
Steve
On Fri, 05 Nov 2010 00:02:46 -0700, Markus Fischer
markus.fisc...@brown-iposs.eu wrote:
Hej Steve,
looking at my
On Wed, 03 Nov 2010 16:25:07 -0700, Wayne Lee linkconn...@googlemail.com
wrote:
and it runs through a lot of stuff finally getting to
a point where it says Remounting / as read-write... and then hangs.
After
a while it comes back with [ some numbers ] hda: Lost Interrupt. Then
the
lost
I found that it gives the error every 30 seconds. I went away and just left
it on and it did finally finished booting after a 10 minute delay.
When I tried to shut it down, it stated giving me the same error while it
was trying to sync the files. At that point I pulled the plug.
Ok
Hej Steve,
Shot in the dark, but check your /etc/apt/sources.list
Usually the command prompt of apt-get update would have shown some
unresolved/unavailable sources. Comment them out e.g. to check if that
is the problem.
Also make sure your Inet settings work properly, otherwise apt-get
wouldn't
On 10-11-04 12:46 PM, Steve Taylor wrote:
The saga continues. I booted my Kubuntu computer into Puppy Linux and
was able to edit the lilo.conf file on my CF card. I changed it to
read-write and added APCI=off. Neither change helped. Then I tried
disconnecting the Soekris board's internal HD
On Wed, Nov 3, 2010 at 5:08 PM, Steve Taylor
steven.taylo...@sbcglobal.netwrote:
Yes, I am using a USB adapter to access the CF card. I have now tried LILO
and it does boot. At first I get LI, then a new line with LILL, and then it
waits for 20-30 seconds and then it starts with OO ..88
I did do the remountrw first and then tried the apt-get update. Here is
the result of the update:
voyage:~# apt-get update
Hit http://security.debian.org lenny/updates Release.gpg
Hit http://security.debian.org lenny/updates Release
Err http://security.debian.org lenny/updates Release
Get:1
I have an old soekris 4801.
I used to see this booting with syslinux/pxelinux,
until HPA (author) added CONSOLE 0 to syslinux. (back around 3.60 iirc)
The soekris bios has some weird feature where it sent some
VGA stuff to console (matching the junk you reported),
and sent double characters
Hi Steve,
At last, try ide_core.nodma=0.0 all_generic_ide
Regards,
Punky
On 11/5/2010 7:47 AM, Steve Taylor wrote:
I added ide-core.nodma=0.0 and =0.1 and I also added irqpoll which I found that
someone else had used.
None of these made any difference in the lost interrupt problems with the
Yes, during the voyage.update procedure I set the console to serial at
57,600 baud. My BIOS is also set to 57,600 and I get the BIOS boot info,
then I get some weird characters, but then it goes into GRUB alright. Then
after it says GRUB Loading Stage2..., nothing else happens. I am not
I am new to this list and to Voyage. I have followed the installation
instructions listed for FC5 although on a Kubuntu 10.04 machine. My target
system is a Soekris 5501. Everything seem to go fine except now when I try
to boot I get to GRUB Loading Stage2... and then it hangs. I imagine I
Yes, I am using a USB adapter to access the CF card. I have now tried LILO
and it does boot. At first I get LI, then a new line with LILL, and then
it waits for 20-30 seconds and then it starts with OO ..88
LLooaaddiinngg LLiinnuuxx... until Linux actually starts booting.
Then
Yes, I am using a USB adapter to access the CF card. I have now tried LILO
and it does boot. At first I get LI, then a new line with LILL, and then it
waits for 20-30 seconds and then it starts with OO ..88
LLooaaddiinngg LLiinnuuxx... until Linux actually starts booting. Then
the
Hi,
I am new to this list and to Voyage. I have followed the installation
instructions listed for FC5 although on a Kubuntu 10.04 machine. My target
system is a Soekris 5501. Everything seem to go fine except now when I try
to boot I get to GRUB Loading Stage2... and then it hangs. I
Hi Steve,
You can search the archive from one of the mail archiver:
MARC - http://marc.theaimsgroup.com/?l=voyage-linux
The Mail Archive - http://www.mail-archive.com/voyage-linux%40list.voyage.hk
Gmane - http://news.gmane.org/gmane.linux.distributions.voyage.general
Nabble -
Hi!
I think I have installed the pages back with
Apt-get install man
Apt-get install manpages
Apt-get install manpages-dev
Or must I install additional packages?
I've also started Mandb to collect the pages but no effect.
Thx
Am 2010 10 18 09:28 schrieb Kim-man apos;Punkyapos; TSE
hi
I try to install voyage linux as a client os on vmware and following
the steps on the cd-rom guide on
http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-custom/src/live-cd/overlay_fs/README.live-cd?rev=1.5view=markup
I have some problems to install voyage and the guide is not very
detailed and.
thanks, that helped
On Mon, Oct 13, 2008 at 9:08 AM, Punky Tse [EMAIL PROTECTED] wrote:
Hi Ben,
Step 3, use cat /proc/partitions to see all your disk details. VMWare by
default create scsi disk, which would be /dev/sda. Or you should recreate
your disk image using ide.
Regards,
Punky
Has anyone had any success on installing SOAP::Lite support for Perl?
Thanks,
glenn
___
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
Hi,
I just tried to install Voyage using Ubuntu Dapper, and had some issues.
I made a patch to fix them, the basically does two things:
1. Modern distributions mount CF disk automatically through HAL. The
installation script tries to manually mount the CF disk, and fails
because it may already
27 matches
Mail list logo