: xfs: undefined symbol:
_FontTransMakeAllCOTSServerListeners
I'm on the brink of having a GUI-capable cloud computer for free. Is it
possible to modify XFree86 to use different directories instead of /tmp and
/usr? If so, I think this is possible. Thank you!
Peter
http://peterburk.dyndns.org
Hi Folks,
i got an question about multiple users on one machine.
Its an simple calculation of my own:
1x PC
2x Keyboard (ps2, usb)
2x Graphiccard (R350 (AGP), Voodoo Banshee (PCI))
2x Monitor
2x person (me, my girlfriend)
So iv created 2 serverlayouts in my xorg.conf (but unconfigured keyboard
We have an old X application that apparently never was able to load resources properly. In order for the resources in a file to have any effect, the classname has to be removed:*.PlanWindow.x: 100*.PlanWindow.y: 200
Instead of:AppName*PlanWindow.x: 100AppName*PlanWindow.y: 200The Xt call clearly
(shell),False);/* Still not raised! */-- Peter
clarify how the syntax of each should work? Thanks in advance-- Peter Bismuti
clarify how the syntax of each should work? Thanks in advance-- Peter
When building the XFree86-4.6.0 mga_hal driver module I had to apply the
attached patch correcting a bad function prototype.
regards
Peter Breitenlohner [EMAIL PROTECTED]Fix prototype
diff -ur -N XF86-4.6.0/xc/programs/Xserver/hw/xfree86/drivers/mga/mga_halmod.c
XF86-4.6.0/xc/programs
I just installed X11 and wish to start a CD-Rom application for
95/98/ME/2000/NT/XP
Please, how can I start this?
Thanks
hp
H. Peter Rubi
Hans Peter Rubi
Sälistrasse 135
4600 Olten
062 296 61 44
076 564 00 44
.
Peter Kunzmann
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
, but that does not help either.
( it is in some patch, I guess it is not in the official XFree86 (yet?))
Regards,
David Balazic
P.S.: Keyboard handling : I have no problems with the keyboard. Please ignore
the keyboard ;-)
Cheers
--
Peter F Bradshaw, [EMAIL PROTECTED], ICQ 75431157 (exadios
anybody know which protocol the WP5540 uses and is that protocol
supported by XFree86? Further, noting that I'm using an older version of
XFree86, would this device be supported by XFree86 V4.*?
Thanks
Cheers
--
Peter F Bradshaw, [EMAIL PROTECTED], ICQ 75431157 (exadios).
PGP public key at http
On Thu Nov 11 18:15:08 +0100 2004, Tristan Miller wrote:
On Thursday 11 November 2004 17:43, Sinoros-Szabo Peter wrote:
I would like to use more than 85Hz refresh rates on my linux box, but I
didn't managed to set it.
Do you know for certain that your monitor supports refresh rates greater
Is there any support for 12 bit plane Pseudocolor Visuals within at
least one video card and the XFree86 drivers? Will there be support
for such features in the future? If so, is there an anticipated
release date?
thanks in advance
Peoter
___
XFree86
in a wide variety of categories.
2. Send out Target Emails for you
We can send your email message to your target customers! We will
customize your email addresses and send your message for you.
* We can Bullet Proof your Web Site $ dedicated server.
Hope to hear from you soon.
Regards!
Peter
www.oy8
with 1280x800... and Alain Poirer's
855resolution patch fixed it perfectly...
Peter Gale
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
from list!
Fatal server error:
could not open default font 'fixed'
How do I correct this?
Thanks,
Peter
Yahoo! Mail (http://dk.mail.yahoo.com) - Gratis: 6 MB lagerplads, spamfilter og
virusscan
XFree86.0.log
Description: XFree86.0.log
XF86Config-4.09062003
Description: XF86Config-4.09062003
ture using the
default options, but can't get thepicture to fill the whole screen, It
seems to be stuck in 600x400.
Please Advice.
Peter
file.
Mark.
On Mon, 3 May 2004 [EMAIL PROTECTED] wrote:
After upgrading my XFree86 will not load
Thanks
Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
, use ssh -Y. This is a new option that came
with openssh-3.8 (see ssh(1)) which is needed for other purposes as well.
regards
Peter Breitenlohner [EMAIL PROTECTED]
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Can anybody help me locate the latest version of trident_drv.o compiled
for 4.3.0
Many thanks
Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
After upgrading my XFree86 will not load
Thanks
Peter
XFree86.0.log
Description: Binary data
On Tue, 6 Apr 2004, Marc Aurele La France wrote:
On Mon, 5 Apr 2004, Peter Breitenlohner wrote:
yes, that was it. I have revoked my changes to xc/programs/xdm/xdmcp.c
lines ca. 1420ff (patch-16-IPv6, kludge) and instead fixed the (s/!=/==/)
and this works for us, except on the notebooks
On Sat, 3 Apr 2004, Marc Aurele La France wrote:
On Mon, 22 Mar 2004, Peter Breitenlohner wrote:
Note: The change in xdmcp.c(NetworkAddressToHostname) is quite a kludge,
but somehow I got tired to further nail down what goes wrong. There is a
comment in the code to that effect
On Thu, 1 Apr 2004, Marc Aurele La France wrote:
On Thu, 1 Apr 2004, Peter Breitenlohner wrote:
1. thanks for applying these patches (as well as those from patch seq: 6190).
When do you expect patches in ftp:/XFree86/4.4.0/fixes/ ?
I've no plans to provide any. Few would bother
since this seems
to cause all the problems. Without such an option I forsee an endless
sequence of questions on the mailing list(s) that are related (in a
non-obvious way) to this issue.
regards
Peter Breitenlohner [EMAIL PROTECTED]This patch (to be applied on top of the previous
.
It seems that originally there were plans to have two distinct sockets that
were abandonned in the middle. Maybe that ought to be cleaned up (fairly
trivial mods in xdmcp.c, just excise chooserFd6).
regards
Peter Breitenlohner [EMAIL PROTECTED]This patch fixes some (but not all) problems
my x-server crashes every time i start kde or xfce4. CPU cycles at 99.0%. i
have gentoo with 2.6.3-gentoo-r1 kernel, but there was the same error with the
2.6.4 kernel. I have an nvidia geforce 4 440 MX (i think). Could you help me?
thanx and greetings
Peter Brunner
hi, my server crashes every time i start kde or xfce4. I emerged the newest
xfree-package but the problem always exists. the cpu goes to 99%. i use gentoo
with kernel 2.6.3 and 2.6.4 but i have the problem in both. my graphic card is
nvidia geforce 4 mx. here is my xfree86.log
there is
absolutely no change in the behaviour.
On Fri, 12 Mar 2004, Peter Breitenlohner wrote:
1. We have a problem in the interaction between
XFree86-4.4.0 = ssh (openssh-3.7.1p2 or 3.8p1) =
mathematica (5.0 or 4.2)
Assume I am logged into an X-session on hosta and then log into hostb via
down and/or
further diagnose this problem.
regards
Peter Breitenlohner [EMAIL PROTECTED]
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
BuildIPv6 NO) and
everything should work as for 4.3.0.
regards
Peter Breitenlohner [EMAIL PROTECTED]
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
On Mon, 8 Mar 2004, Andrew C Aitchison wrote:
On Sun, 7 Mar 2004, Marc Aurele La France wrote:
Redirected to devel@
On Sun, 7 Mar 2004, Peter Breitenlohner wrote:
It would be extremely helpful if one could compile XFree86 with IPv6
support, but then disable IPv6 at runtime via
On Sun, 7 Mar 2004, Marc Aurele La France wrote:
Redirected to devel@
On Sun, 7 Mar 2004, Peter Breitenlohner wrote:
1. xdm produced an error message
chooser socket creation failed
and there was just a useless parent process but no child process(es) and no
Xserver was started
be appreciated.
peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hi.
I just got a new Logitech mouse which gives 800dpi.
However, I measured that im getting about 400dpi under
a recent XFree version and Debian Linux. Changing the Resolution to
800 or anything more does not help - it appears using the
generic PS/2 protocol will not enable me to get more than
I've developed code on the HPUX platform using the native X11R6 windowing
supplied using g++
2.95.2. In the code there are public domain widget such as a Notebook
widget and XgComboBoxWidget.
The identical code compiled on both systems unchanged produces strange
results on the FreeBsd box. HP
I've developed code on the HPUX platform using the native X11R6 windowing
supplied using g++
2.95.2. In the code there are public domain widget such as a Notebook
widget and XgComboBoxWidget.
The identical code compiled on both systems unchanged produces strange
results on the FreeBsd box. HP
have a dead area the
corresponding area on the target screen is inaccessible.
The fix would be to teach x2x about xinerama; which is not that hard.
just my 2ct.
Peter Zijlstra
On Fri, 2004-01-09 at 01:23, Rus Foster wrote:
Hi All,
I've run across an intresting problem with x2x and xinerama. My
get nothing back at all. My locale is
en_AU.UTF-8. Does anyone have any idea what might be wrong?
Peter
--
Peter B. West http://www.powerup.com.au/~pbwest/resume.html
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Log file attached. Tried to send the display of Tripos' software
called Sybyl running on Redhat AS2.1 system back to my display.
This crashes every time.
My system is a Dell Latitude D800
Thanks
Peter DrakeUnderkoffler
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11
Sure,
Attached are two XF86Config files. The _old one is my old setup with 2
cards an MGA-G400 MAX and a MGA-II. The _current one is with a Radeon
9000 Dual head.
Have fun, and a happy new year to all!
Peter Zijlstra
On Wed, 2003-12-31 at 20:25, Luca Capello wrote:
-BEGIN PGP SIGNED
hardware, and are generally lucky. That is
fine for LCDs and awful for relatively modern CRTs with fast phosphors.
-Peter
But moustaches are a mystery, to evolutionary biologists and to practically
everyone else.
-- Economist.com
___
XFree86 mailing list
Hi,
sure, I do 2048x1536 on one head and 1600x1200 on the other, works like
a charm!
Peter Zijlstra
On Tue, 2003-12-30 at 00:08, Alex Deucher wrote:
yes.
--
Is it possible to run different resolutions on different screens with
xinerama.
I have a 17 monitor and a 14
FROM: PETER SHAGAYA,
FEDERAL SECRETARIAT COMPLEX,
IKOYI.
EMAIL :[EMAIL PROTECTED]
Best wishes of good health and success in your pursuits particularly through my
proposal as contained in this letter. Before going into details of my proposal to you,
I must first solicit you to treat
FROM: PETER SHAGAYA,
FEDERAL SECRETARIAT COMPLEX,
IKOYI.
EMAIL :[EMAIL PROTECTED]
Best wishes of good health and success in your pursuits particularly through my
proposal as contained in this letter. Before going into details of my proposal to you,
I must first solicit you to treat
FROM: PETER SHAGAYA,
FEDERAL SECRETARIAT COMPLEX,
IKOYI.
EMAIL :[EMAIL PROTECTED]
Best wishes of good health and success in your pursuits particularly through my
proposal as contained in this letter. Before going into details of my proposal to you,
I must first solicit you to treat
FROM: PETER SHAGAYA,
FEDERAL SECRETARIAT COMPLEX,
IKOYI.
EMAIL :[EMAIL PROTECTED]
Best wishes of good health and success in your pursuits particularly through my
proposal as contained in this letter. Before going into details of my proposal to you,
I must first solicit you to treat
On Thu, 11 Dec 2003, Marcel Mourguiart wrote:
I dont´t have problem with the monitor, i just would like to provide the
monitor data to the xfree data base, so they can include it like a supported
monitor.
try [EMAIL PROTECTED], I think he is collecting them.
-Peter
uh... is this sometthing I should be worried about?
I don't believe there is such a thing as a right to privacy, but at the
same time, this sort of thing does get me wondering...
spammers?, NSA? ,or what?.
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL
Hi,
I have an older, (late 90's vintage Pentium Pro)
computer that I am hoping to convert to run MSC linux, for which I have a set of
V2001 CD's.
I am booting off their distribution CD with a
essentially blank, NTFS formatted secondary 18G Hard disk where I wanted to
install the OS and
Hi,
I have an older, (late 90's vintage Pentium Pro)
computer that I am hoping to convert to run MSC linux, for which I have a set of
V2001 CD's.
I am booting off their distribution CD with a
essentially blank, NTFS formatted secondary 18G Hard disk where I wanted to
install the OS and
Glad to somebody found my message, excuse me for being such a noob and
asking such silly questions, I'm afraid I've been spoon fed by microsoft and
apple for a couple decades now, so it's taking me a while to get my thinking
cap on.
and I'm afraid the latest answers only leave me with more
for older apps and --display=:0.1
for GTK+ apps. I don't know what QT uses. Setting the environment
variable DISPLAY should also work I think.
hth
Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
on
irc.freenode.net.
There are probably others who want the same thing so you can work together
on it :)
-Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
is very small, and its hard to tell.
Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
the colours accross the
two monitors.
Thanks again for all your help!
Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
with the s3virge driver or with my board? Any
help would be very much appreciated.
Peter Russell
-- Minimal XF86Config-4 file:
# This was generated by XFree86 -configure, I have made a few changes
# for my mouse keyboard, taken DRI and GLX out of the list of
# modules, and added the default depth
Hello all,
I am getting this warning message when I start x.
Attached is my XF86Config file. Any help would be
greatly appreciated.
FYI: the complete error message is:
s3v: warning: VerticalRetraceWait timed out(1:3).
s3v: warning: VerticalRetraceWait timed out(3:3).
s3v: warning:
via m1 (1Ghz, 256 mb ram, 30
gb harddisk) with castelrock (apollo cle266)
graphics onboard
The logfile is attached to this message
Thanks
--
Peter Meisel +49 9131 8523124
[EMAIL PROTECTED]
Paul-Gordan-Strasse 5
91052 Erlangen
This is a pre-release version
-PC via m1 (1Ghz, 256 mb ram, 30
gb harddisk) with cle266 graphics onboard
The logfile is attached to this message
Thanks
--
Peter Meisel +49 9131 8523124
[EMAIL PROTECTED]
Paul-Gordan-Strasse 5
91052 Erlangen
This is a pre-release version of XFree86
Hi, I can affirm this,
AGPMode 2, EnablePageFLip off, AGPFastWrite off works
anything else except AGPMode 1 freezes my machine over.
XFree86 version: 4.3.99.15
Linux 2.4.22-ck2 SMP
Hercules Prophet 3D 9000 128MB
Tyan Tiger MP board with dual AMD Thunderbird 1.4GHz
1GB memory
Peter Zijlstra
is different when you run Morphix.
Or some AGP stuff is setup differently.
-Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
to compare the mtrr settings...
-Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Range Registers). You can
view them and write them as /proc/mtrr under Linux.
To see where the screen buffer is located, poke around with lspci -vvv or
/proc/pci (or somesuch).
-Peter
PS: X should enable the right range automatically but sometimes it doesn't
work. It probably even tells you
;)
(but the kernel might be different -- that sometimes matters for MTRR and
AGP -- or the X configuration might be different)
a driver or an XFree86 configuration issue.
Which is why you should check /proc/mtrr and the server logs.
-Peter
___
XFree86
for the slow DGA setup, right?
What about the fast DGA setup (Morphix?) ? If you can get it easily with
a quick reboot, that is.
-Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
On Sat, 1 Nov 2003, Pieter Hulshoff wrote:
I've included the config and logfiles in the previous post.
Were they attached or included?
If they were attached, I didn't see your post at all... SWEN, stupid
Windows programs, (what should be) criminally naïve windows users and all
that :(
-Peter
It was just an effect of Gentoo default settings =)
They turn off tcp listening by default. Sorry about the scary posting.
Peter
Peter Zhelezniakov writes:
Hi there,
I've upgraded from xfree 4.2.0 to 4.3.0 and encountered a strange problem.
With DISPLAY=sagittarius:0 (sagittarius being
On Sun, 26 Oct 2003, David Dawes wrote:
When I discussed this with you privately a while ago all I got were
disrespectful and insulting responses. Now there is more of the same.
Err... No.
He was quite reasonable, in my opinion.
-Peter
___
Devel
On Sun, 26 Oct 2003, Thomas Dickey wrote:
On Sun, 26 Oct 2003, Peter Firefly Lund wrote:
On Sun, 26 Oct 2003, David Dawes wrote:
When I discussed this with you privately a while ago all I got were
disrespectful and insulting responses. Now there is more of the same.
Err
Mark, thanks for trying. I have the monitor switched to BNC and have two
separate sets of cables. On researching the problem with Nokia, they said
that they do not support Linux, but thought the problem could be related to
the Multigraph being a Fixed Frequency Monitor. My understanding of RH8 is
thx for the great help.
XAllowEvents together with Ivan's hint (disable autorepeat per key)
works absolute perfectly :))
XKB allows you to switch to detectable auto-repeat mode, where you
get Press/Press/Press/Release rather than
Press/Release Press/Release Press/Release.
You can
-21 at 07:56, Peter Bergmann wrote:
Can anyone tell me how to query the real state of a specific key
(Pressed/Released?) with xlib ?
Does xkb offer functions for this issue?
XKB allows you to switch to detectable auto-repeat mode, where you
get Press/Press/Press/Release rather than
I'd like to add a special hotkey feature to the icewm window manager:
If the user holds down a (function) key for a configurable
amount of seconds a program will be executed.
Now my problem is how to query the key states in xlib.
My first attempt was using XGrabKey and calculating the time
I have a Nokia MultiGraph 445 Xpro monitor and a Diamond Stealth 2000 pro video card.
I can not ge the card and monitor to work using the BNC connectors. Works fine with
the D-Sub connectors. Any ideas? I would go to Diamond, but since they got bought no
one seems to be supplying support for
Sorry, and thank you Mark, yes I have a SVGA - BNC cable with 5 BNC connectors at the
end of it. Got any ideas?
From: Mark Vojkovich [EMAIL PROTECTED]
Date: 2003/10/19 Sun PM 03:08:00 EDT
To: [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: [XFree86] BNC Connections
On Sun, 19
on I've noticed that most posts are related to that
initial config step. I spent about 4 hours on the process. I'll get back to
completing it today or tomorrow, TIME permitting.
-- Peter Kozberski
___
XFree86
RENDER
(**) Option Protocol wsmouse
(**) Mouse0: Protocol: wsmouse
(**) Option CorePointer
(**) Mouse0: Core Pointer
(**) Option Device /dev/wsmouse
(==) Mouse0: Buttons: 3
(II) Keyboard Keyboard0 handled by legacy driver
(II) XINPUT: Adding extended input device Mouse0 (type: MOUSE)
-- Peter
://www.freetype.org/opentype/
http://www.freetype.org/opentype/
-Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
(as far as I understand this mailing list is conserned with
the development of xfree, rather than the use of xlib)?
--
Yours
Peter Poulsen
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
Thanks. If mail bounces (mailbox full) then Sobig.F did it again. Please use the
support form on the website www.smart-projects.net instead then.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hi,
I'm running RH9 (Dell Latitude C800) trying to connect
to Solaris 9(Ultra 10) system through X.
command from linux box to the sun box.
X :1 -query sunbox
problem: all I get is a black screen and a cursor.
Help
Thanks.
Pete
__
Do you Yahoo!?
Yahoo!
Craig,
Thanks.
PL
---Original Message---
From: Craig Ringer [EMAIL PROTECTED]
Sent: 08/05/03 05:47 PM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Black screen when running X
I'm running RH9 (Dell Latitude C800) trying to connect
to Solaris 9(Ultra 10) system through X.
command from
---Original Message---
From: Craig Ringer [EMAIL PROTECTED]
Sent: 08/05/03 05:47 PM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Black screen when running X
I'm running RH9 (Dell Latitude C800) trying to connect
to Solaris 9(Ultra 10) system through X.
command from linux box to the
.
Have you found out anything else? Could you post this to the list for
me...I'm going to subscribe when I get home form work.
Thanks,
Ben
--
Peter Wainwright [EMAIL PROTECTED]
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman
On Mon, 4 Aug 2003, Peter Wainwright wrote:
More info on XFree hanging on startup when using Synaptics
touchpad on some laptops:
[...]
I now believe that XFree86 is not (solely) responsible for the
problems, there is some interaction with the /dev/psaux handling
code which is now merged
What type of Video Card is it? Attach the XFree86.0.log if possible too,
please.
Peter
- Original Message -
From: sarina [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, July 31, 2003 4:03 PM
Subject: [XFree86] Mandrake 9.1 and XFree86 4.0.3 compatibility
Hi,
I have
the font path.
Someone else please write it to see where you would go to check the
FontPath.
Peter
- Original Message -
From: Tim [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 01, 2003 4:37 AM
Subject: [XFree86] strange xfree crash
I have never had a problem with xfree
test to see if they
work.
Peter
- Original Message -
From:
Peter Harrington
To: [EMAIL PROTECTED]
Sent: Friday, August 01, 2003 6:14
PM
Subject: [XFree86] SetUp Problem
I have an old (1996) Micron monitor that I am trying to use
with a Dell 2350 PC running Red Hat
I have an old (1996) Micron monitor that I am trying to use
with a Dell 2350 PC running Red Hat Linux 8.0. The PC video card uses an
Intel 82845G graphics chip. In the Red Hat configuration, I accepted the
default for the monitor:
Horizontal 31.5 - 48.5
KHz
Vertical 50-70 Hz
800x600 16
XFree86ers,
I might be missing something simple. Here is my scenario:
Hardware IBM RS/6000 7043-150 workstation
Software SUSE SLES 8.0
XFree86 Version 4.2.0
The graphics card I was using was not supported so I removed it before
doing the SuSe install. I wanted to
believe I found one (www.nvidia.com/object/linux_display_ia32_1.0-4363.html
there is a 'run' file which appears like a huge textfile which I have saved on
my WindowsXP system) but I have no idea how to install it - I have access only
to my window system.
Regards
Peter Høgstedt
[EMAIL PROTECTED]
: Type /I2CDevPtrenter, for
example. Use 'n' and 'p' to skip between the matches.
-Peter
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
a hardware incompatibility?
I attach my XF86Config and log files.
--
Peter Wainwright [EMAIL PROTECTED]
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF
... ;)
-Peter
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
Hi,
please can i find solution to this grahic problem ?.
5 types of information resume the problem :
-1/ Graphic carte :
DELL E772p / ATI RADEON 7500 AGP (QW) 32MO
--2/OS:
Linux localhost.localdomain 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 unknown
Then you can worry about video
card problems later.
Peter Nehem
P.S - Print out the start up guides. It's a lot
to remember what to do if you are going to do a Stage 1 setup, all from
scratch.
- Original Message -
From:
Gilles
"Masterfight"
To: [EMAIL PROTECTED
the man files (and some source files, too).
-Peter
Writing is Nature's way of letting you know how sloppy your thinking is - Guindon
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
are trying to do? Etc...
-Peter
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
another Latin word than the other Germanic languages
-- the weirdness and hodge-podge nature of English strikes again :/
(this is not to spite Sven - merely to rant about English and at the same
time increase the chances that an English-only speaker will understand)
-Peter
1 - 100 of 368 matches
Mail list logo