Hi All
For an embedded board with powerpc processor, I have successfully cross
compiled xfree86 for PPC.
I merged the xfree with the nfs.
I can able to boot the board with this root file system on loading the
prompt it displays all directories
but on entring into etc directory,
*/etc # cd X11
I think the most you should need to reinstall would be the RH
XFree86 RPMs that came with your distribution. And perhaps there
is a subset that just contains the server and modules.
Mark.
On Thu, 23 Jun 2005, Ganesh K.B. wrote:
so would the only solution would be
hello,
i installed RH9 on my computer(128MB RAM, 1.2GHz)
yesterday and worked
without any problems whatsoever till today when
suddenly, once when i
booted up linux, the X Server seemed to have been
struck with some
problem. everything loaded fine and then instead of
the GDM login
manager, this
You are missing /usr/X11R6/lib/modules/fonts/libbitmap.a
which is a required XFree86 module. It appears that you
have an incomplete or corrupted XFree86 installation.
I have heard of such problems on RedHat9 (and only RedHat9)
before. If the server was running previous, you had a
so would the only solution would be to reinstall RH
completely?
--- Mark Vojkovich [EMAIL PROTECTED] wrote:
You are missing
/usr/X11R6/lib/modules/fonts/libbitmap.a
which is a required XFree86 module. It appears that
you
have an incomplete or corrupted XFree86
installation.
I
I also get this message
cannot start the X server(your graphical interface). It
is
likely that it is
not set up correctly. Would you like to view the X
server output to
after I installed redhatv9 on a fujitsu lifebook laptop. I installed the
same version of redhat on my pc and have been
On Mon, 2004-03-22 at 14:05, Michael Schreckenbauer wrote:
Hi,
Am Montag, 22. Mrz 2004 14:57 schrieb David Eduardo Gomez Noguera:
On Sun, 2004-03-21 at 22:09, Mark Vojkovich wrote:
The GeForceFX 5700 is technically not supported by the nv driver
prior to XFree86 4.4. XFree86 4.3's
On Sun, 2004-03-21 at 22:09, Mark Vojkovich wrote:
The GeForceFX 5700 is technically not supported by the nv driver
prior to XFree86 4.4. XFree86 4.3's nv driver will try to treat it
as an older card and start up anyhow, but in the case of the
5700, that doesn't work (except for digital
Hi,
Am Montag, 22. März 2004 14:57 schrieb David Eduardo Gomez Noguera:
On Sun, 2004-03-21 at 22:09, Mark Vojkovich wrote:
The GeForceFX 5700 is technically not supported by the nv driver
prior to XFree86 4.4. XFree86 4.3's nv driver will try to treat it
as an older card and start up
Hello. I have a running installation of Fedora and have just started to
get used to gentoo, in another hard drive.
I havent been able to configure gentoo, and dont know what is going on.
I have an MSI nvidia GForce card.
I have tried starting from a fresh XF86Conf from xf86config to starting
from
The GeForceFX 5700 is technically not supported by the nv driver
prior to XFree86 4.4. XFree86 4.3's nv driver will try to treat it
as an older card and start up anyhow, but in the case of the
5700, that doesn't work (except for digital flat panels, where it
kindof works). It's works fine with
hi
i'm trying to start x-terminal via etherboot and
ltsp (x-klient 486 dx 66 with tseng et 4000 w32p ,
x-server something better :) but i have some
problem with xfree.
(ww) tseng: no matching device section for instance
(BusID PCI:65:21:0) found
...
fatal server error :
failed to initialize
On Thursday, July 15, 2010 3:58 am, Marek Kopec wrote:
i'm trying to start x-terminal via etherboot and ltsp (x-klient 486 dx 66
with tseng et 4000 w32p , x-server something better :) but i have some
problem with xfree.
(ww) tseng: no matching device section for instance (BusID PCI:65:21:0)
Today, I installed Gentoo's latest stable kernel 2.4.20-gentoo-r1
which includes the GR security patches. I have enabled the kmem
protection of the GR security patches, which prohibits writing to
/dev/kmem and /dev/mem (and also mmapping them for write) and opening
/dev/port, but - according
hi i got a problem like this:
.
Symbol RegisterResourceName from module
/usr/X11R6/lib/modules/extensions/libextmod.a is unresolved!
Symbol RegisterResourceName from module
/usr/X11R6/lib/modules/extensions/libextmod.a is unresolved!
Looks like a partial upgrade and the modules are mismatched.
Check the compiled for messages in the /var/log/XFree86.0.log
file. All the modules should be the same version as the server.
Mark.
On Sat, 22 Feb 2003, neotrace gentoo wrote:
hi i got a problem like
16 matches
Mail list logo