Hi XFree86 list,
tl;dr - Please can someone give me advice on running XFree86 as an unprivileged
(non-root) user?
OpenShift (http://www.openshift.com) is a service from Red Hat that gives you a
completely free server with SSH and SFTP access. Unlike Amazon's free for 12
months model
Celliann vorliegenden
http://armyane-ua.com/images/biscuitdyingleeharrison/?enCIDID=fvwramggf
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
hi,all
I want to build a Xvfb which do not write anything in /tmp. My problem
is the Xvfb I build is 4M large, but the Xvfb in sites is 1M. my Xvfb is
very slow when gtk_init() is running. I think some optinos should be set
NO, but I don't know. I want to ask if there is any information, just
hi,all
I want to build a Xvfb which do not write anything in /tmp. My problem
is the Xvfb I build is 4M large, but the Xvfb in sites is 1M. my Xvfb is
very slow when gtk_init() is running. I think some optinos should be set
NO, but I don't know. I want to ask if there is any information, just
HI,
I am trying to compile Xfree86 4.8.0 for ARM platform and getting into
error at first step itself. Can anyone help me go further.
Here is the error log
Building XFree86 version 4.8.0 (15 December 2008).
I hope you checked the configuration parameters in ./config/cf
to see if you need
First of all I offer you my warmest congratulations for this great
project, I am a supporter of Free Software and am looking for XFree86
FreeDOS.
I read some guides that I should compile the source with DJGPP, but
others say it is not done then all you need to really run XFree85 on
FreeDOS
was effectively at end-of-life, and was forced to upgrade to Fedora
17. And, now, this behaviour is happening all the time. Can someone
please tell me why this is happening and how to turn it off.
Many thanks!
-t
___
XFree86 mailing list
XFree86@XFree86
i have a window id of a particular window how do i minimize/Maximize the
window using the X11 functions.
How do i minimize a window all in Linux using X11 Functions... ...
| |
+--+--+
XFree86 developer and VP. ATI driver and X server internals.
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org
...@yahoo.com
Cc: xfree86@XFree86.Org xfree86@xfree86.org
Sent: Thursday, 20 October 2011 8:13 PM
Subject: Re: [XFree86] minimize/Maximize a window
On Thu, 20 Oct 2011, praveen wrote:
i have a window id of a particular window how do i minimize/Maximize
the window using the X11 functions.
How do i
Dear Sir,
i am New to Linux and X11. In a C++ program i need the Window
ID of a Opened Windows ...
here are the requirement
from a C++ i have open a Process(say for Example Firef). Now i need to get the
process ID this window in C++. How do i implement this.
is there a
| |
| Edmonton, Alberta |Standard disclaimers apply|
| T6G 2H1 | |
| CANADA | |
+--+--+
XFree86
manutm...@gmail.com
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
| |
| CANADA | |
+--+--+
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
| |
| CANADA | |
+--+--+
XFree86 developer and VP. ATI driver and X server internals
On Mon, 19 Oct 2009, john blair wrote:
--- On Mon, 10/19/09, Marc Aurele La France t...@ualberta.ca wrote:
From: Marc Aurele La France t...@ualberta.ca
Subject: Re: [XFree86] cross compile xfree86-4.8.0
To: john blair mailtome200420032...@yahoo.com
Cc: xfree86@xfree86.org
Date: Monday, October
On Wed, 14 Oct 2009, Marc Aurele La France wrote:
On Wed, 14 Oct 2009, john blair wrote:
--- On Wed, 10/14/09, Marc Aurele La France t...@ualberta.ca wrote:
From: Marc Aurele La France t...@ualberta.ca
Subject: Re: [XFree86] cross compile xfree86-4.8.0
To: john blair mailtome200420032
'fbdevHWUnmapMMIO':
fbdevhw.c:644: error: 'PAGE_MASK' undeclared (first use in this function)
make[7]: *** [fbdevhw.o] Error 1
make[7]: Leaving directory
`/opt/toolchain/src/xfree86-4.8.0/build/programs/Xserver/hw/xfree86/fbdevhw'
The contents of asm/page.h for code sourcery toolchain (the later versions
On Wed, 14 Oct 2009, john blair wrote:
--- On Wed, 10/14/09, Marc Aurele La France t...@ualberta.ca wrote:
From: Marc Aurele La France t...@ualberta.ca
Subject: Re: [XFree86] cross compile xfree86-4.8.0
To: john blair mailtome200420032...@yahoo.com
Cc: XFree86@XFree86.Org
Date: Wednesday
LinkedIn
I'd like to add you to my professional network on LinkedIn.
- dibyajyoti
Learn more:
https://www.linkedin.com/e/isd/700453209/-41qhtn6/
--
(c) 2009, LinkedIn Corporation
Hello,
The build failure is not with xfree86 as a separate entity; but, a
failure porting using MacPorts. The error is as follows:
Error: Target org.macports.build returned: shell command cd /opt/
local/var/macports/build
We are very pleased to announce the release of XFree86 4.8.0. This
release comes about a year and a half after the 4.7.0 release, and is
the product of the work of dedicated volunteers. We would like to
thank all who have contributed to this release, through code, testing,
and other feedback
Hi all
Iam using a Pmc graphics card on a base board with ppc processor along with
tundra system controller. On pci bus
(II) PCI: 00:00:0: chip 10e3,0148 - vme
(II) PCI: 00:02:0: chip 10b5,6520 - pci to pci bridge
(II) PCI: 01:03:0: chip 126f,0720 - Pmc card
my var/log file gives
(II) Bus 1
| |
| CANADA | |
+--+--+
XFree86 developer and VP. ATI driver and X server internals.
___
XFree86 mailing list
, 0xF200+ port)
I have modified the direct I/O accessing in the xfree in my video driver
...
Shall i need to modify the same in compiler.h inside
programs/Xserver/hw/xfree86/common ??
I suspect the problem is closely related to I/o issue only
I have attached the log file
(val, 0xF200+port)
inb(val,port) as inb(val, 0xF200+ port)
I have modified the direct I/O accessing in the xfree in my video driver
...
Shall i need to modify the same in compiler.h inside
programs/Xserver/hw/xfree86/common ??
I suspect the problem is closely related to I/o
Hi
Iam trying to integrate the xfree video driver for my PMC graphics card ..
while configuring and running the driver access some illegal memory area and
iam geting oops kernel access bad area..
I need to debug the video driver.. ( reg its IOBASE,mem base etc)
I added printf inside the driver
Hi
Can you Please tell me wht the command in xfree to recompile the whole
source (if any change is made only in video driver) ?
Iam giving make World ... its starting from first...
I need to compile only the changed file .. plzz xfree users tell me the
command...
|
| T6G 2H1 | |
| CANADA | |
+--+--+
XFree86 developer and VP. ATI driver and X server internals
do I need to do in order to get the proper display using
Xnest?
Regards,
Girish
-Original Message-
From: Marc Aurele La France [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Girish Hilage [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED], devel@XFree86.Org
Subject: [XFree86] Re: problem with Xnest
do I need to do in order to get the proper display using
Xnest?
Regards,
Girish
-Original Message-
From: Marc Aurele La France [EMAIL PROTECTED]
Reply-To: xfree86@xfree86.org
To: Girish Hilage [EMAIL PROTECTED]
Cc: xfree86@XFree86.Org, [EMAIL PROTECTED]
Subject: [XFree86] Re: problem
Hi,
I am using FC8 and giving following command :
Xnest :1 -kb -terminate -name -query10.77.33.165 -geometry 800x800
-fp tcp/10.77.33.165:7100
but, I can only see a window with black dots in it and no UI is
visible.
'xfs' on 10.77.33.165 is running properly.
Is there
| |
+--+--+
XFree86 developer and VP. ATI driver and X server internals.
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
, retain, copy, print, distribute or
use this message. If you have received this communication in error, please
notify the sender and delete all copies of this message. Persistent Systems
Ltd. does not accept any liability for virus infected mails.
___
XFree86
.
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
Hello,
I run a prepress forum and am working on a special project using
XFree86. The Sample Implementation of X11 (SI) comes with a large number
of standard bitmap fonts, including the `fixed' family, and bitmap
versions of Courier, Times, Helvetica and some members of the Lucida
family
Dear Team,
I downloaded Xfree86-4.5.0. The build fails indicating that it cannot
find termcap library.
In xc/lib folder, I do not find termcap folder containing sources.
Other libraries are present along with their sources.
Do I need to download termcap sources separately and build in the form
Yes, i found it out already, and the right driver for this video card is
just radeonhd http://wiki.x.org/wiki/radeonhd.
Thanks anyway
Marc Aurele La France wrote / napísal(a):
On Sun, 13 Apr 2008, Mario Trubacik wrote:
I have installed last version of XFree86 onto Solaris 10 x86 with ATI
Hello,
I have installed last version of XFree86 onto Solaris 10 x86 with ATI
Radeon Mobility X1300 card.
After executed command XFree86 -autoconfigure i get this error messages.
With Xorgserver the ati driver also doesn't work, have anybody advice
how run over the graphic card in Solaris
On Sun, 13 Apr 2008, Mario Trubacik wrote:
I have installed last version of XFree86 onto Solaris 10 x86 with ATI Radeon
Mobility X1300 card.
After executed command XFree86 -autoconfigure i get this error messages.
With Xorgserver the ati driver also doesn't work, have anybody advice how
run
Hi everyone,
I wanted to build XFree86 4.7.0 on FreeBSD 7.0, but failed, either i386
or amd64 version. Sorry I've deleted the world.log, it seemed that an
error about SharedDriModuleTarget in Mesa/dri/gamma/Makefile.
Could anyone help me?
Thanks
the corresponding RPM and do ...
rpm -Uf rpmname
I didn't go off on a tangent as much as a typo. In any event, is there is
bug-free way to do the Xfree86 installation from scratch? Getting this to
work by some patch is simply a poor solution to an installation bug.
Also note, I entered kde
I set up suse 10.2 on an X64 box. To use the latest ATI drivers, X86free
is required. The Xfree86 installation went well. However, when I boot
the PC, I no longer get the KDE environment. Rather, I get a simple
Xwindows interface. Any suggestions
On Mon, 24 Mar 2008, gary wrote:
I set up suse 10.2 on an X64 box. To use the latest ATI drivers, X86free is
required. The Xfree86 installation went well. However, when I boot the PC, I
no longer get the KDE environment. Rather, I get a simple Xwindows interface.
Any suggestions?
I can't
Would that be from Suse? Consider me a micron above newbie.
-Original Message-
From: Marc Aurele La France [EMAIL PROTECTED]
Date: Tue, 25 Mar 2008 08:43:13
To:gary [EMAIL PROTECTED]
Cc:xfree86@XFree86.Org
Subject: Re: [XFree86] new installation: KDE no longer starts
On Mon, 24 Mar
, Alberta |Standard disclaimers apply|
| T6G 2H1 | |
| CANADA | |
+--+--+
XFree86 developer and VP
On Tue, 4 Mar 2008, tanweer alam wrote:
I am trying to cross compile Xfree86 for my arm target. I am using cross.defand
host.def which I used for cross compiling xc-01101 package. There it was
cross compiling ok with the same method.
I have set the PATH to my toolchain dir.
How ever for some
Hi,
I am trying to cross compile Xfree86 for my arm target. I am using cross.defand
host.def which I used for cross compiling xc-01101 package. There it was
cross compiling ok with the same method.
I have set the PATH to my toolchain dir.
How ever for some reason compilation breaks with
asm
originally sent from incorrect email address
Dear Friends,
At this time a new operating system for x86 massively parallel systems is being
developed for a grant from the National Institute of Science. The OS allows
free rendering of real-time brain behaviors in the operating room. Since it
] at
openSubscriber.com
http://www.opensubscriber.com/message/xfree86@xfree86.org/8437436.html
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
Please don't send me anymore offers
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Re: [XFree86] Help: How to configure tinyx server for pc
CC: xfree86@xfree86.org
Date: Sun, 10 Feb 2008 11:48:51 +0530
Hi Kundu,
Try the following format while starting Xfbdev
Xfbdev [:display
on behalf of [EMAIL PROTECTED] at openSubscriber.com
http://www.opensubscriber.com/message/xfree86@xfree86.org/8437436.html
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
and keyboard
when i start my Xfbdev.
Any help is highly appreciated.
Kundan das
--
This message was sent on behalf of [EMAIL PROTECTED] at openSubscriber.com
http://www.opensubscriber.com/message/xfree86@xfree86.org/8437436.html
___
XFree86 mailing list
XFree86
On Fri, 1 Feb 2008, Anton 'FaioN' Mayorov wrote:
Marc Aurele La France wrote:
I'm not sure if this bug is connected with XFree86 at all. There are
several bits of information that it is a kernel bug. It seems to me that
affected kernel versions are 2.6.22 and 2.6.23. Check this:
http
Marc Aurele La France wrote:
I'm not sure if this bug is connected with XFree86 at all. There are
several bits of information that it is a kernel bug. It seems to me
that affected kernel versions are 2.6.22 and 2.6.23. Check this:
http://lkml.org/lkml/2007/6/21/216 .
atyfb has __ALWAYS__
, and I have all my screen distorted. Overriding
the frequency helped a bit, and now I get a jittered X, as with out-of-vsync
on CRT.
I'm not sure if this bug is connected with XFree86 at all. There are several
bits of information that it is a kernel bug. It seems to me that affected
kernel versions
On Sun, 27 Jan 2008, Anton 'FaioN' Mayorov wrote:
Oops, forgot to answer this one...
P.S. BTW, is there any way to load symbols both from XFree86 main executable
and driver module simultaneously? Using xf86Break and xf86DummyVar is not
very convenient...
I'm not sure what you mean here
| |
| Edmonton, Alberta |Standard disclaimers apply|
| T6G 2H1 | |
| CANADA | |
+--+--+
XFree86
On Thu, 24 Jan 2008, Anton 'FaioN' Mayorov wrote:
I've got troubles running XFree86-4.7.0 on a IBM Thinkpad laptop
(ATI Rage Mobility P/M video adapter). Launching XFree86 results in
blank screen or meaningless garabge (if nolinear is not set). It seems
that it corrupts video memory (all fonts
Hello
I've got troubles running XFree86-4.7.0 on a IBM Thinkpad laptop
(ATI Rage Mobility P/M video adapter). Launching XFree86 results in
blank screen or meaningless garabge (if nolinear is not set). It seems
that it corrupts video memory (all fonts are gone until cold reboot, hot
reboot has
Hi
I have installed XFree86 4.7 and the Xfbdev, XVesa etc binaries are created.
Now when i run the Xvesa binary, the server starts but it is not configured
hence mouse and keyboard events are not accepted. so i get a grey screen and
my mouse and keyboards won't work.
Help me telling how
On Tue, 22 Jan 2008, kundan das wrote:
I have installed XFree86 4.7 and the Xfbdev, XVesa etc binaries are created.
Now when i run the Xvesa binary, the server starts but it is not configured
hence mouse and keyboard events are not accepted. so i get a grey screen and
my mouse and keyboards
Would anyone know if XFree86-4.3.0-62.EL had problems with
XFillRectangle and newly drawn bitmaps in RHEL 3?
I have an application that draws rectangles into bitmaps (depth 1
pixmaps). These bitmaps are set as the stipple bitmap within
corresponding full color GCs for a full color pixmap
Hi
Iam at present trying to integrate the xfree with siliconmotion driver to
sM722 chip in a powerpc processor based board
As per the following link I cleared font messing problem
http://www.spinics.net/lists/xfree86/msg11381.html
But the cursor instead of X is appearing as diamond shaped
Palm Vacations, Vacation Network Website Makes Destination Planning Simple
Atlanta, GA (PRWEB) November 27, 2007 -- Finding a dream vacation just got
easier thanks to the new Vacation Network, Inc. website. Launched November
20, 2007, the new site offers improved features and greater
Ok, and what does this have to do with xfree86?
I'm surprised this one got past the postmaster.
On 1/3/08, Blogger Man [EMAIL PROTECTED] wrote:
The Ticket Clinic, Accutane Side Effects Lawyer: Hair Loss, Depression,
Suicide
You probably know the drug isotretinoin by its trade name
Hi all,
I am crosscompiling Xfree86 4.7.0 from sources for ARM and I've got a lot of
.h: No such file or directory, which I manually put into the include dir
and continue to make... until now that I can't find this xf86PciIds.h
neither in the sources nor the web.
This is the log:
xf86ScanPci.c
On Solaris 8, I had a problem compiling dmxinit.o:
make[6]: Entering directory
`/home/sam.sexton/Xvfb/xc/programs/Xserver/hw/dmx'
rm -f dmxinit.o
/opt/SUNWspro/bin/cc -c -O -Xa -v -I.
-I../../../../programs/Xserver/include -I../../../../programs/Xserver/os
-I../../../../programs/Xserver/mi
I ran into problem trying to cross compile XFree86-4.7.0 on a i386
processor with SuSE10.2 for a target platform powerpc 7450. I had the
crosstool chain for powerpc 7450. I modified both site.def, host.def and
cross.def to point to the cross-tool chain directory.
I issued make World
unknown
*on running ./XFree86 -configure*
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:01:0: chip 10e3,0148 card 10e3, rev 01 class 06,80,00 hdr
00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O
for last minute shopping deals?
Find them fast with Yahoo! Search.
http://tools.search.yahoo.com/newsearch/category.php?category=shopping
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
Hi All
I have cross compiled XFree 4.7.0 for powerpc processor
I have integrated xfree with the file system
If i boot the board and run the following command it throws illegal
instruction
# /usr/X11R6/bin/XFree86 -configure
Illegal instruction
Please Help me to solve the above issue
Thanks
for any suggestions.
-- Eric
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
Hi All
I have crosscompiled xfree4.7.0 for ppc , merged with the file system and i
can able to boot an embedded board with ppc thru nfs
But,* there is no xf86config file
*I have tried all the commands ,
XFree86 -configure -*
*/bin/ash: XFree86: not found
here is the list of directories
Hi All
For an embedded board with powerpc processor, I have successfully cross
compiled xfree86 for PPC.
I merged the xfree with the nfs.
I can able to boot the board with this root file system on loading the
prompt it displays all directories
but on entring into etc directory,
*/etc # cd X11
Dear Sir or Madam,
Recently I found a problem about NVIDIA GeForce FX 5200 driver for RedHat
9.0 Linux.
After I installed the driver, the system hinted me that the installation was
successfully completed. But actually X cannot be started at all. I googled
the problem but found nothing
it can't find a mouse...either the VM is screwed
up or VMware isn't showing a mouse to the VM.
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
- Original Message -
From: Francesco Loiacono [EMAIL PROTECTED]
To: xfree86@xfree86.org
Sent: Monday, November 12, 2007 4:06 PM
Subject: Fw: XFree86.0.log
From R.H.7.2 installed ( migrated from phisical to virtual ) on vmware
3.xxx.
Best reguards
Francesco Loiacono
- Original
Hmm...sounds like C Runtime
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
ultimately to de the Cimg iage library
Max
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
Hi all
Iam trying to cross compile xfree 4.7 for powerpc
iam facing the following issue
hw/tinyx/trio/libtrio.a(s3draw.o): In function `s3_24ImageGlyphBlt':
s3draw.c:(.text+0x563c): undefined reference to `fbGlyph24'
collect2: ld returned 1 exit status
make[4]: *** [Xtrio] Error 1
make[4]:
| |
+--+--+
XFree86 developer and VP. ATI driver and X server internals.
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo
While cross compiling xfree86 for powerpc architecture,
Iam getting the following error
*crt1.o: No such file: No such file or directory*
But that file is avilable at /drv1/74xx_compiler/ppc_74xx/lib/
Help me to solve this issue
Hi
What changes I need to make in cross.def , host.def , cross.rules to support
xfree86 cross compiling for powerpc architecture ?
Thanks
vishnu
Hi all
I have a GNU cross compiler toolchain for PowerPC for
Linux and I am trying to compile XFree86 source
for PowerPC on a fedora X86 PC.
It would be of great help if anyone could suggest a
procedure for the same.
Give me document/link related to cross compiling xfree86 for powerpc
Thanks
Hello everybody,
I have a very basic question with regards to installation of xfree86 on
SL4.5 with X11 preinstalled. sh Xinstall.sh -check tells me that I should be
installing Linux-ix86-glibc23
The installation manual says that I should not install it using X11
terminal, my question is ...what
Hi all
Can anybody help me how to create a Linux root file system with X window
support for a powerpc 74xx based board ?
Any documents/links related to that is also welcome
Thanks in advance
R.Mahendravarman
Hi
I have downloaded Xfree source for SM722.
Since iam new to this field,
Can anybody help me how to install this xfree driver of SM722 for X window
support ?
Thanks in advance
R.Mahendravarman
Hi all
Iam working on a SM722 based Graphics card
We ported linux 2.6.21 (took from the open source path sourceforge) on a
powerpc based board
The graphics card sits on the PMC of the above linux ported board.
I have successfully integrated the framebuffer driver for the board
Now I want to
Trying to build on Solars 10 SPARC.
XFree86 version 4.7.0
Using GNU Make, not Sun's make.
Get this error:
gmake[3]: Entering directory `/apps/XFree86/v4.7.0/xc/lib/freetype2'
Makefile:1152: *** missing separator. Stop.
Note that the word separator in the make lingo means tab character
, but it worked for now.
-- original message below -
Trying to build on Solars 10 SPARC.
XFree86 version 4.7.0
Using GNU Make, not Sun's make.
Get this error:
gmake[3]: Entering directory `/apps/XFree86/v4.7.0/xc/lib/freetype2'
Makefile:1152: *** missing
_
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071distributionid=0066
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo
page.
I have rebuilt X from XFree86 version 4.7.0 and the error has gone away.
Originally the last line of man Xvfb was
X Version 11 Release 6.6
XVFB(1)
but now it says
XFree86 Version 4.7.0
XVFB(1)
So this looks like it's probably a bug
Hi,
i tried to find my fonts path using xset utility. but it says
unable to open the display.
i had export the path as:
export DISPLAY=:0.
.but then also i'm getting the same error .
Any suggestions for this ?
saravanan.
Mr Saminath,
I could not find teh 'xfs' executable in my xc directory.
There is a folder in /buildroot/build_mipsel/xc-011010/programs/xfs but no
executables are present. Is there any file wherein i should enable this ?
saravanan.
Hi,
i had compiled buildroot with tinyx (xc-011010.tar.bz2) support for MIPS
development board.but i could not find any fonts being built with the tinyx?
can anyone say me how to enable fonts in tinyx or where to find the fonts
?
thanks in advance,
hi,
i want to bring xwindow up by using using v4l apis on bottom of xserver .
i don't have a framebuffer device. can it be implemented using v4l driver
(programs/Xserver/hw/xfree86/drivers/v4l/v4l.c) supplied with the
XFree86-4.7.0. If not is it possible through anyother way ?
Thanks in advance
On Mon, 8 Oct 2007, jenny tc wrote:
i want to bring xwindow up by using using v4l apis on bottom of xserver .
i don't have a framebuffer device. can it be implemented using v4l driver
(programs/Xserver/hw/xfree86/drivers/v4l/v4l.c) supplied with the
XFree86-4.7.0. If not is it possible through
of failed request: 17
Current serial number in output stream: 19
There are a number of different reasons for which XCreateWindow() would
return BadMatch. Check the man page.
I think MacOS uses the XFree86 version of Xvfb, but my first question is how
can I tell for sure, and how do I determine
1 - 100 of 19827 matches
Mail list logo
