On Wed, 2 Jan 2002, Kenneth Crudup wrote:
Looking thru a couple of months of list archives turned up nothing, so:
When running 4.1.0 on my laptop using a S3Virge MX, my system clock loses
at least two seconds per minute.
I've done everything I can to narrow this down, and the bottom
Hi,
I am using Xfree86
4x with an Elsa Gladiac 511 Twin graphics adapter. This card has two VGA
outputs. Of course I would like to use two monitors now, but I stumbled into
some configuration problems. In the documentationI found out, that the
BusID is mandatory in such a setting. What I
Mark Vojkovich [EMAIL PROTECTED] wrote:
On Wed, 2 Jan 2002, F. Heitkamp wrote:
module installed.
You said it crashed. Do you mean it segfaulted? Do you have
a stack trace?
X just stops. The image of the session remains in the framebuffer but
no interaction
can take place.
Paulo Vitor Magacho da Silva [EMAIL PROTECTED] wrote:
Hi,
since I upgraded my XFree86 from 4.0.3 to 4.1.0, I can't you the dri extension
for
the Voodoo 4.
The XFree 4.0.3 had a RPM package called XFree86-tdfx-dri-4.0.3 ... that
provided the
dri capability for the Voodo 4500. It
On Thu, 2002-01-03 at 14:01, Mike wrote:
Paulo Vitor Magacho da Silva [EMAIL PROTECTED] wrote:
Hi,
since I upgraded my XFree86 from 4.0.3 to 4.1.0, I can't you the dri extension
for
the Voodoo 4.
The XFree 4.0.3 had a RPM package called XFree86-tdfx-dri-4.0.3 ... that
provided
On Thu, 2002-01-03 at 15:05, Philippe Trottier wrote:
I have these 2 setups
Machine 1:
-PPC 7450 (G4) Mac
-ATI RAGE 128 PRO
-Linux Kernel 2.4.18-pre1 (include ppc patches)
machine 2
-PPC 750 (G3 Mac,9500/120, upgraded)
-ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev
On Thu, 2002-01-03 at 13:47, Mike wrote:
A similar thing happens to me with my VooDoo3 when it freezes during
fullscreen 3D and one thing you can do to avoid rebooting is to run
xinit or whatever in the remote session that you used to kill X and
you should find that the X server starts up
Hi,
after trying about 8 hours, and reading almost everything i could find,
could the matrox g200 agp ( mgag200 ) do sync on green ?
because my working config for the Matrox Millennium won't work with the
g200.
i've tried the folling servers:
svga 3.3.6 ( millennium works )
xfree8 4.1.0 (
Hiya,
I've been using Xinerama for the past few months happily until yesterday
when I returned from the xmas holidays to find out that my box had been
'broken' by an over ambitous collegue..
After re-installing everything I set to re-configuring XFree86 to enable
xinerama again.. and thats when
Okay.. as is always the way.. 5minutes after posting to this list, I
managed to find the bit of information I was after..
Seriously, I have been searching all day using various combinations
of xinerama related words to try and come up with a fix.. including
'xpert xinerama' to try and get any
On Thu, 3 Jan 2002, Yuri van Oers wrote:
On Wed, 2 Jan 2002, Kenneth Crudup wrote:
Looking thru a couple of months of list archives turned up nothing, so:
When running 4.1.0 on my laptop using a S3Virge MX, my system clock loses
at least two seconds per minute.
I've done everything
On 3 Jan 2002, Mike wrote:
Does anyone know of an easy way of disabling DGA2 in Xfree86 4.0.3 in the source or
at runtime. Whenever it is used it freezes the server on my VooDoo3 but I have
disabled its use in one of the applications and DGA1 works fine, but an app I am
using now is
On Thu, 3 Jan 2002, Steve Wingate wrote:
What is the best pure 2D card in X11 with non-binary-only (read nvidia) drivers?
Does a Matrox G450/550 compare to GeForce Radeon in 2D?
Well, I am not sure what precisely you are looking for, but if you want an
inexpensive card ATI Rage Pro and
Em Qui 03 Jan 2002 11:53, you wrote:
That shouldn't be needed, the tdfx module that comes with kernel 2.4.12
should work. I suspect there's some kind of version conflict with the
client libraries. Hard to tell without any real info though.
First, sorry for the very long email that I am
On Fri, 2002-01-04 at 02:13, Paulo Vitor Magacho da Silva wrote:
Em Qui 03 Jan 2002 11:53, you wrote:
That shouldn't be needed, the tdfx module that comes with kernel 2.4.12
should work. I suspect there's some kind of version conflict with the
client libraries. Hard to tell without any
The main reason I went with the 4.X series is 'cause I'd read on the 'net
that it has the ability to use APM (DPMS?) to darken laptop backlights,
but I haven't seen the ability to do this anywhere.
I've got a ProStar (AKA Sager/Kapok/Clevo/...) laptop with a dumber BIOS
than my Transmonde, so
What is the best pure 2D card in X11 with non-binary-only (read nvidia) drivers?
Does a Matrox G450/550 compare to GeForce Radeon in 2D?
Well, I am not sure what precisely you are looking for, but if you want an
inexpensive card ATI Rage Pro and Rage 128 are quite good. And (last time
On Thu, 3 Jan 2002, Steve Wingate wrote:
I just want support for high resolutions and refresh rates, say
1920x1440@85hz, true color.
I have a $90 (last-year's price, retail) 16MB 3DFx Voodoo 3000 AGP in my
main machine that does 1920x1440x32bpp (well, 24bpp/32pixmap in 4.X), @81Hz
(limited by
Just trying to get into the BSD swing of things with the new OpenBSD 3.0
- I haven't changed too much, just ran the xf86config, things seemed to
be working fine with the default window manager FVWM, but FVWM is FVWM.
X seemed to work fine before changing to blackbox, I ran the xf86config
(text
Em Qui 03 Jan 2002 23:18, you wrote:
It's what libGL uses for the hardware rendering, so yes, it's still very
much needed. :) That said, I know next to nothing about Conectiva but my
impression is that it's a fairly reasonable distribution so I'd expect
them to provide means to find out
Well, I use FreeBSD and I figure I'm not going to get great 3D performance no matter
what with nvidia only producing linux binary drivers. So I may as well go for the
absolute best 2D I can get. Cost really isn't an issue, other than not wanting to pay
$400 for top-end 3D performance I'll
On Thu, 3 Jan 2002, James Herschel wrote:
Just trying to get into the BSD swing of things with the new OpenBSD 3.0
- I haven't changed too much, just ran the xf86config, things seemed to
be working fine with the default window manager FVWM, but FVWM is FVWM.
X seemed to work fine before
On Thu, 3 Jan 2002, Paulo Vitor Magacho da Silva wrote:
First, sorry for the very long email that I am sending.
So you are saying that I don't need the tdfx_dri.so file anymore ?
You need that library. XFree's libGL is just an intermediary, it uses that
library to talk to 3Dfx boards to do
Hi everyone!
One of the computers I use is particularly slow.
So when I start X, I would like it to load in the background on VT7 _without_
changing the current VT.
e.g. I'm happily tapping away on VT1 and then decide that I need to play
Maelstrom. So I startx but as soon as I press Enter,
What is the best pure 2D card in X11 with non-binary-only (read nvidia) drivers?
Does a Matrox G450/550 compare to GeForce Radeon in 2D?
Matrox is the only company I've ever heard make noise about their 2D performance. The
box from my G400 DualHead billed it as the fastest 2D accelerator
25 matches
Mail list logo