On Wed, Oct 30, 2002 at 07:22:28AM +, Dr Andrew C Aitchison wrote:
On Wed, 16 Oct 2002, Scott Lampert wrote:
I'm having trouble getting DDC to work with my Dell P1110 and my Matrox
G550. No matter what options I add or remove from my device section I
get output similar to:
Oddly
On Sat, 9 Nov 2002 [EMAIL PROTECTED] wrote:
Does DDC require OS support, such as loaded I2C drivers?
There are two versions: DDC1 and DDC2. These are not the same as the EDID
version reported in the DDC info, and DDC2 is split into at least three).
Some monitors support DDC1 but not DDC2 and
On Wed, 16 Oct 2002, Scott Lampert wrote:
I'm having trouble getting DDC to work with my Dell P1110 and my Matrox
G550. No matter what options I add or remove from my device section I
get output similar to:
Oddly enough, when I run X -configure it reads the EDID information
successfully
I'm having trouble getting DDC to work with my Dell P1110 and my Matrox
G550. No matter what options I add or remove from my device section I
get output similar to:
(II) MGA(0): I2C bus DDC initialized.
(II) MGA(0): I2C device DDC:ddc2 registered.
(II) MGA(0): I2C device DDC:ddc2 removed.
(II)