On June 14, 2007 1:56:05 AM -0700 Frank Cusack [EMAIL PROTECTED] wrote:
Anyway I agree Sun should fill this hole, but the 2530 misses the mark.
I'd like to see a chassis that takes 750GB/1TB SATA drives, with SAS
host ports. And sell just the chassis, so I can skip the 100%+ drive
markup. I
On Wed, 16 Jul 2008, Frank Cusack wrote:
On June 14, 2007 1:56:05 AM -0700 Frank Cusack [EMAIL PROTECTED] wrote:
Anyway I agree Sun should fill this hole, but the 2530 misses the mark.
I'd like to see a chassis that takes 750GB/1TB SATA drives, with SAS
host ports. And sell just the
On July 16, 2008 9:40:03 PM -0700 Rich Teer [EMAIL PROTECTED]
wrote:
http://richteer.blogspot.com/2006/05/sun-storage-product-i-would-like-to.html
I remember that! The 2.5 disks don't really count as low cost, but
still your other post beats me. :P
Let's say it was a team effort. :)
-frank
Hello Joel,
Wednesday, July 18, 2007, 8:19:56 PM, you wrote:
JM Hi Robert,
JM It should work. We have not had the time or resources to test it (we are
JM busy qualifying the 2530 (SAS array) with an upcoming MPxIO enabled MPT
JM driver and SATA drive support).
JM I do not know if MPxIO will
Hello Joel,
Tuesday, June 26, 2007, 10:13:54 PM, you wrote:
JM Hi folks,
JM So the expansion unit for the 2500 series is the 2501.
JM The back-end drive channels are SAS.
JM Currently it is not supported to connect a 2501 directly to a SAS HBA.
But does it work? Has anyone actually tested it?
Hi Robert,
It should work. We have not had the time or resources to test it (we are
busy qualifying the 2530 (SAS array) with an upcoming MPxIO enabled MPT
driver and SATA drive support).
I do not know if MPxIO will claim raw drives or nottypically there
are vendor specific modules that
On June 13, 2007 7:51:21 PM -0500 Al Hopper [EMAIL PROTECTED] wrote:
It seems wasteful to (determine the required part number and) order a
2530 JBOD expansion shelf and then return it if it does not work out
It's a 2501 I think.
Obviously this is a huge hole in Suns' current storage
Hello Louwtjie,
Monday, June 4, 2007, 9:14:26 AM, you wrote:
LB On 5/30/07, James C. McPherson [EMAIL PROTECTED] wrote:
Louwtjie Burger wrote:
I know the above mentioned kit (2530) is new, but has anybody tried a
direct attached SAS setup using zfs? (and the Sun SG-XPCIESAS-E-Z
card, 3Gb
Robert Milkowski wrote:
Hello Louwtjie,
Monday, June 4, 2007, 9:14:26 AM, you wrote:
LB On 5/30/07, James C. McPherson [EMAIL PROTECTED] wrote:
Louwtjie Burger wrote:
I know the above mentioned kit (2530) is new, but has anybody tried a
direct attached SAS setup using zfs? (and the Sun
Hello James,
Wednesday, June 13, 2007, 1:06:22 PM, you wrote:
JCM Robert Milkowski wrote:
Hello Louwtjie,
Monday, June 4, 2007, 9:14:26 AM, you wrote:
LB On 5/30/07, James C. McPherson [EMAIL PROTECTED] wrote:
Louwtjie Burger wrote:
I know the above mentioned kit (2530) is new, but has
Robert Milkowski wrote:
...
JCM Yes, my team's test plan did include ST2530 array attached
JCM to SAS hba.
But there's 2530 with RAID controller and SAS external ports.
To clarify I was asking about expansion trays without any RAID
controllers - just 2530 jbod attached with dual links to a host
Robert Milkowski wrote:
...
JCM As far as I understand it, I do not think that a plain
JCM jbod version of the ST2530 is supported. I believe that
JCM a jbod attached to the ST2540 (fc-connected) is supported.
If it works it doesn't have to be supported.
and practically speaking, I expect
On Wed, 13 Jun 2007, James C. McPherson wrote:
Robert Milkowski wrote:
...
JCM As far as I understand it, I do not think that a plain
JCM jbod version of the ST2530 is supported. I believe that
JCM a jbod attached to the ST2540 (fc-connected) is supported.
If it works it doesn't have to be
Al Hopper wrote:
On Wed, 13 Jun 2007, James C. McPherson wrote:
Robert Milkowski wrote:
...
JCM As far as I understand it, I do not think that a plain
JCM jbod version of the ST2530 is supported. I believe that
JCM a jbod attached to the ST2540 (fc-connected) is supported.
If it works it
On Thu, 14 Jun 2007, James C. McPherson wrote:
Al Hopper wrote:
On Wed, 13 Jun 2007, James C. McPherson wrote:
Robert Milkowski wrote:
...
JCM As far as I understand it, I do not think that a plain
JCM jbod version of the ST2530 is supported. I believe that
JCM a jbod attached to the ST2540
Hi there
I know the above mentioned kit (2530) is new, but has anybody tried a
direct attached SAS setup using zfs? (and the Sun SG-XPCIESAS-E-Z
card, 3Gb PCI-E SAS 8-Port Host Adapter, RoHS:Y - which is the
prefered HBA I suppose)
Did it work correctly?
Thank you
Louwtjie Burger wrote:
I know the above mentioned kit (2530) is new, but has anybody tried a
direct attached SAS setup using zfs? (and the Sun SG-XPCIESAS-E-Z
card, 3Gb PCI-E SAS 8-Port Host Adapter, RoHS:Y - which is the
prefered HBA I suppose)
Did it work correctly?
Yes, it was tested as
17 matches
Mail list logo