I tried to change the bootloader from grub to lilo on the golden client,
before run si_prepareimage, I made sure the golden client is booting
with lilo fine. si_getimage -ip-assignment dhcp -etc
Then I try to update my test client with the lilo booted image.
After finishing the rsyncing with image server, here is the error
message:
error: can not execute /sbin/lilo
Fatal:raid_setup: stat("/dev/hda")
at /usr/lib/perl5/verdor-perl/5.8.6/Boot.pm line 110
I don't have any raid, just one harddrive with serverl partitions.
strange enough, I still got the following error after this:
Probing devices to guess BIOS drives. This may take a long time.
df: warning can't read table of mounted filesystems.
Could not find device for /boot: Not found or not a block device.
Probing devices to guess BIOS drives. This may take a long time.
Use of uninitialized value in concatenation (.) or string at
/usr/lib/systemconfig/Boot/Grub.pm line 160.
Use of uninitialized value in substitution (s///) at
/usr/lib/systemconfig/Boot/Grub.pm
line 164.
Use of uninitialized value in concatenation (.) or string at
/usr/lib/systemconfig/Boot/Grub.pm line 235.
Use of uninitialized value in concatenation (.) or string at
/usr/lib/systemconfig/Boot/Grub.pm line 237.
Probing devices to guess BIOS drives. This may take a long time.
reimaged client will boot into grub, dhcp is not configured after
reboot. I am sure I have separate image for old grub and lilo and is
using the lilo one for the newer test.
What's wrong? Any hint will be greatly appreciated!
> From: Shiling Ding <[EMAIL PROTECTED]>
> To: [email protected]
> Organization: Meteorology Department, Florida State University
> Date: Mon, 15 Aug 2005 08:35:47 -0400
> Subject: [Sisuite-users] Re: systemconfigurator --runboot fails(chroot does
> not see /boot)
> Reply-To: [email protected]
>
> I am not sure whether I should have a new thread on this, and I put it
> here anyway since my error message is almost exactly the same as Jan
> Groenewald
>
> After rsyncing:
>
> Probing devices to guess BIOS drives. This may take a long time.
>
> df: warning can't read table of mounted filesystems.
> Could not find device for /boot: Not found or not a block device.
> Probing devices to guess BIOS drives. This may take a long time.
> Use of uninitialized value in concatenation (.) or string at
> /usr/lib/systemconfig/Boot/Grub.pm line 160.
> Use of uninitialized value in substitution (s///) at
> /usr/lib/systemconfig/Boot/Grub.pm
> line 164.
> Use of uninitialized value in concatenation (.) or string at
> /usr/lib/systemconfig/Boot/Grub.pm line 235.
> Use of uninitialized value in concatenation (.) or string at
> /usr/lib/systemconfig/Boot/Grub.pm line 237.
> Probing devices to guess BIOS drives. This may take a long time.
>
> After reboot, the grub is installed fine, but DHCP is not configure as
> systemconfigurator specified, imaged computer is using static IP of the
> golden client.
>
> Golden Client: linux 2.6.11-gentoo-r3, systemconfigurator 2.0.9,
> systemimager 3.4.1.
> Imager Server: fc4, systemimager 3.4.1.
>
> Initially I have the /boot not found failed since I have /boot in it's
> own partition, I was able to get it working after change the / /boot
> order in the master script after reading this list.
>
>
> Thanks a lot.
>
>
>
>
> Message: 4
> Date: Mon, 15 Aug 2005 14:51:07 +0200
> To: [email protected]
> Subject: Re: [Sisuite-users] Re: systemconfigurator --runboot fails(chroot
> does not see /boot)
> From: [EMAIL PROTECTED] (Jan Groenewald)
> Reply-To: [email protected]
>
> Hi
>
> On Mon, Aug 15, 2005 at 08:35:47AM -0400, Shiling Ding wrote:
> > df: warning can't read table of mounted filesystems.
> > Could not find device for /boot: Not found or not a block device.
> > Probing devices to guess BIOS drives. This may take a long time.
> That does seem the same. Is it within the chroot /a/ environment?
> Try putting shellout instead of reboot at the end of the masterscript,
> so that you can investigate this.
>
> > After reboot, the grub is installed fine, but DHCP is not configure as
> > systemconfigurator specified, imaged computer is using static IP of the
> > golden client.
> Strange. Are you sure during the getimage command you chose DHCP and not
> static or something else? I recall three choices there, one being a
> simple backup which would keep the golden client's settings.
>
> > Golden Client: linux 2.6.11-gentoo-r3, systemconfigurator 2.0.9,
> My problem was udev (since Ubuntu is 2.6 kernel with udev) related.
> My systemconfigurator is slightly newer: 2.0.10-1 (ubuntu)
>
> > systemimager 3.4.1.
> My systemimager is 3.2.3-3 (ubuntu)
>
> > Imager Server: fc4, systemimager 3.4.1.
> Image server: debian, systemimamger 3.2.3
>
> > Initially I have the /boot not found failed since I have /boot in it's
> > own partition, I was able to get it working after change the / /boot
> > order in the master script after reading this list.
> I thought it was that but seem to have overcome this - my boot and root
> are still separate.
>
> cheers,
> Jan
> --
> .~.
> /V\ Jan Groenewald
> /( )\ www.aims.ac.za
> ^^-^^
>
>
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users
