there's your problem. you're trying to rsync from the wrong server. Check the autoinstall script and change the ip address of the rsync server to be that of the actual rsync server, not the dhcp server.
On Friday 07 October 2005 08:57, Jide Osatuyi wrote: > no the ip address in the error message is for the dhcp > server. > the ip address i used for the previous test is that of > the imager server > > --- John Jolet <[EMAIL PROTECTED]> wrote: > > and that ip address in the error message is the same > > one you just typed and > > got success with in the previous test? > > > > On Friday 07 October 2005 08:25, Jide Osatuyi wrote: > > > "rsync: failed to connect to "***.**.**.***(dhcp > > > > ip > > > > > address)" caonnection refused" > > > "rsync error:error in socket IO (code 10) at > > > clientserver.c(83) Killing off running processes" > > > > > > --- John Jolet <[EMAIL PROTECTED]> wrote: > > > > what exactly is the error you're getting when it > > > > fails again? > > > > > > > > On Friday 07 October 2005 08:05, Jide Osatuyi > > > > wrote: > > > > > I did and I could get the list of available > > > > > > > > modules on > > > > > > > > > the server from the target box. > > > > > > > > > > --- John Jolet <[EMAIL PROTECTED]> wrote: > > > > > > On Friday 07 October 2005 07:46, Jide > > > > Osatuyi > > > > > > wrote: > > > > > > > I checked and the service is running and > > > > > > > > > > > > "LISTENING" > > > > > > > > > > > > > as well. > > > > > > > > > > > > I meant the test where you do rsync > > > > servername:: > > > > to > > > > > > > > > > get the list of available > > > > > > modules. do this from the target after it > > > > dies. > > > > > > > > this will tell us if the > > > > > > target can actually talk rsync to rsync with > > > > the > > > > > > > > server. > > > > > > > > > > > > > --- John Jolet <[EMAIL PROTECTED]> wrote: > > > > > > > > On Friday 07 October 2005 07:21, Jide > > > > > > > > Osatuyi > > > > > > > > > > wrote: > > > > > > > > > I'm sorry please disregard the last > > > > > > > > message.I > > > > > > > > > > > > could > > > > > > > > > > > > > > > > > ping the target box from the image > > > > server > > > > > > and > > > > > > > > > > I > > > > > > > > > > > > > > cana > > > > > > > > > > > > > > > > > do same from the target box too. > > > > > > > > > > > > > > > > then you can disregard my answer :) > > > > > > > > > > > > > > > > so with the target host in this failed > > > > mode, > > > > > > > > what > > > > > > > > > > > > > > happens when you repeat the > > > > > > > > tests we ran before with rsync? > > > > > > > > > > > > > > > > > --- John Jolet <[EMAIL PROTECTED]> wrote: > > > > > > > > > > On Thu, 2005-10-06 at 08:33 -0700, > > > > Jide > > > > > > > > Osatuyi > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > i got ***.**.**.167 > > > > > > > > > > > I don't know how to ping another > > > > box > > > > > > from > > > > > > > > > > the > > > > > > > > > > > > > > > > other. > > > > > > > > > > > > > > > > > > > > "ping ***.**.***.***" of other box. > > > > the > > > > > > > > parts > > > > > > > > > > > > > > you > > > > > > > > > > > > > > > > > > masked above HAVE to > > > > > > > > > > be the same between the two boxes. > > > > if > > > > > > you > > > > > > > > > > boot > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > target into windows, > > > > > > > > > > you can use the device manager to > > > > find > > > > > > out > > > > > > > > > > what > > > > > > > > > > > > > > it > > > > > > > > > > > > > > > > > > is. > > > > > > > > > > > > > > > > > > > > > I dont know how to identify the > > > > nic > > > > > > either > > > > > > > > > > > > from > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > ifconfig information i have here. > > > > > > > > > > > > > > > > > > > > > > --- John Jolet <[EMAIL PROTECTED]> > > > > wrote: > > > > > > > > > > > > On Thu, 2005-10-06 at 07:51 > > > > -0700, > > > > > > Jide > > > > > > > > > > > > Osatuyi > > > > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > the image I'm trying to place > > > > on > > > > > > the > > > > > > > > > > box > > > > > > > > > > > > > > is > > > > > > > > > > > > > > > > > > linux, > > > > > > > > > > > > > > > > > > > > > > but > > > > > > > > > > > > > > > > > > > > > > > > > the box I'm trying to place an > > > > > > > > image > > > > > > > > > > on > > > > > > > > > > > > > > > > originally > > > > > > > > > > > > > > > > > > > > > > did > > > > > > > > > > > > > > > > > > > > > > > > > not have linux on it. > > > > > > > > > > > > > The imageserver and the target > > > > box > > > > > > are > > > > > > > > > > not > > > > > > > > > > > > > > > > exactly > > > > > > > > > > > > > > > > > > > > > > > similar:the imageserver is a > > > > dell > > > > > > > > gx260 > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > the > > > > > > > > > > > > > > > > > > > > > > target > > > > > > > > > > > > > > > > > > > > > > > > > box is a dell gx270. > > > > > > > > > > > > > Yes i was dropped into a > > > > busybox > > > > > > > > prompt > > > > > > > > > > > > > > and > > > > > > > > > > > > > > > > > > when i > > === message truncated === > > > > > __________________________________ > Yahoo! Mail - PC Magazine Editors' Choice 2005 > http://mail.yahoo.com > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Sisuite-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sisuite-users -- John Jolet Your On-Demand IT Department 512-762-0729 www.jolet.net [EMAIL PROTECTED] ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Sisuite-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sisuite-users
