i checked d autoinstall script and this is what
found.i didnt find a place to change the ip address
"<!--
This file contains partition information about the
disks on your golden
client. It is stored here in a generic format that
is used by your
SystemImager server to create an autoinstall script
for cloning this
system.
You can change the information in this file to
affect how your target
machines are installed. See "man
autoinstallscript.conf" for details.
-->
<config>
<disk dev="/dev/hda" label_type="msdos"
unit_of_measurement="MB">
<!--
This disk's output was brought to you by the
partition tool "sfdisk",
and by the numbers 4 and 5 and the letter Q.
-->
<part num="1" size="101" p_type="primary"
p_name="-" flags="boot" />
<part num="2" size="*" p_type="primary"
p_name="-" flags="lvm" />
</disk>
<fsinfo line="10" comment="# This file is edited by
fstab-sync - see 'man fstab-sync' for details" />
<fsinfo line="20"
real_dev="/dev/VolGroup00/LogVol00" mp="/" fs="ext3"
options="defaults" dump="1" pass="1" />
<fsinfo line="30" real_dev="/dev/hda1"
mount_dev="LABEL=/boot" mp="/boot" fs="ext3"
options="defaults" dump="1" pass="2" />
<fsinfo line="40" real_dev="none" mp="/dev/pts"
fs="devpts" options="gid=5,mode=620" dump="0" pass="0"
/>
<fsinfo line="50" real_dev="none" mp="/dev/shm"
fs="tmpfs" options="defaults" dump="0" pass="0" />
<fsinfo line="60" real_dev="none" mp="/proc"
fs="proc" options="defaults" dump="0" pass="0" />
<fsinfo line="70" real_dev="none" mp="/sys"
fs="sysfs" options="defaults" dump="0" pass="0" />
<fsinfo line="80"
real_dev="/dev/VolGroup00/LogVol01" mp="swap"
fs="swap" options="defaults" dump="0" pass="0"
format="no" />
<fsinfo line="90" real_dev="/dev/hdc"
mp="/media/cdrecorder" fs="auto"
options="pamconsole,ro,exec,noauto,managed" dump="0"
pass="0" format="no" />
<fsinfo line="100" real_dev="/dev/fd0"
mp="/media/floppy" fs="auto"
options="pamconsole,exec,noauto,managed" dump="0"
pass="0" format="no" />
<boel devstyle="static"/>
</config>
"
--- John Jolet <[EMAIL PROTECTED]> wrote:
> there's your problem. you're trying to rsync from
> the wrong server. Check
> the autoinstall script and change the ip address of
> the rsync server to be
> that of the actual rsync server, not the dhcp
> server.
>
> On Friday 07 October 2005 08:57, Jide Osatuyi wrote:
> > no the ip address in the error message is for the
> dhcp
> > server.
> > the ip address i used for the previous test is
> that of
> > the imager server
> >
> > --- John Jolet <[EMAIL PROTECTED]> wrote:
> > > and that ip address in the error message is the
> same
> > > one you just typed and
> > > got success with in the previous test?
> > >
> > > On Friday 07 October 2005 08:25, Jide Osatuyi
> wrote:
> > > > "rsync: failed to connect to
> "***.**.**.***(dhcp
> > >
> > > ip
> > >
> > > > address)" caonnection refused"
> > > > "rsync error:error in socket IO (code 10) at
> > > > clientserver.c(83) Killing off running
> processes"
> > > >
> > > > --- John Jolet <[EMAIL PROTECTED]> wrote:
> > > > > what exactly is the error you're getting
> when it
> > > > > fails again?
> > > > >
> > > > > On Friday 07 October 2005 08:05, Jide
> Osatuyi
> > >
> > > wrote:
> > > > > > I did and I could get the list of
> available
> > > > >
> > > > > modules on
> > > > >
> > > > > > the server from the target box.
> > > > > >
> > > > > > --- John Jolet <[EMAIL PROTECTED]> wrote:
> > > > > > > On Friday 07 October 2005 07:46, Jide
> > >
> > > Osatuyi
> > >
> > > > > wrote:
> > > > > > > > I checked and the service is running
> and
> > > > > > >
> > > > > > > "LISTENING"
> > > > > > >
> > > > > > > > as well.
> > > > > > >
> > > > > > > I meant the test where you do rsync
> > >
> > > servername::
> > > > > to
> > > > >
> > > > > > > get the list of available
> > > > > > > modules. do this from the target after
> it
> > >
> > > dies.
> > >
> > > > > > > this will tell us if the
> > > > > > > target can actually talk rsync to rsync
> with
> > >
> > > the
> > >
> > > > > > > server.
> > > > > > >
> > > > > > > > --- John Jolet <[EMAIL PROTECTED]> wrote:
> > > > > > > > > On Friday 07 October 2005 07:21,
> Jide
> > > > >
> > > > > Osatuyi
> > > > >
> > > > > > > wrote:
> > > > > > > > > > I'm sorry please disregard the
> last
> > > > >
> > > > > message.I
> > > > >
> > > > > > > > > could
> > > > > > > > >
> > > > > > > > > > ping the target box from the image
> > >
> > > server
> > >
> > > > > and
> > > > >
> > > > > > > I
> > > > > > >
> > > > > > > > > cana
> > > > > > > > >
> > > > > > > > > > do same from the target box too.
> > > > > > > > >
> > > > > > > > > then you can disregard my answer :)
> > > > > > > > >
> > > > > > > > > so with the target host in this
> failed
> > >
> > > mode,
> > >
> > > > > > > what
> > > > > > >
> > > > > > > > > happens when you repeat the
> > > > > > > > > tests we ran before with rsync?
> > > > > > > > >
> > > > > > > > > > --- John Jolet <[EMAIL PROTECTED]>
> wrote:
> > > > > > > > > > > On Thu, 2005-10-06 at 08:33
> -0700,
> > >
> > > Jide
> > >
> > > > > > > Osatuyi
> > > > > > >
> > > > > > > > > > > wrote:
> > > > > > > > > > > > i got ***.**.**.167
> > > > > > > > > > > > I don't know how to ping
> another
> > >
> > > box
> > >
> > > > > from
> > > > >
> > > > > > > the
> > > > > > >
> > > > > > > > > > > other.
> > > > > > > > > > >
> > > > > > > > > > > "ping ***.**.***.***" of other
> box.
> > >
> > > the
> > >
> > > > > > > parts
> > > > > > >
> > > > > > > > > you
> > > > > > > > >
> > > > > > > > > > > masked above HAVE to
> > > > > > > > > > > be the same between the two
> boxes.
> > >
> > > if
> > >
> > > > > you
> > > > >
> > > > > > > boot
> > > > > > >
> > > > > > > > > the
> > > > > > > > >
> > > > > > > > > > > target into windows,
> > > > > > > > > > > you can use the device manager
> to
> > >
> > > find
> > >
> > > > > out
> > > > >
> > > > > > > what
> > > > > > >
> > > > > > > > > it
> > > > > > > > >
> > > > > > > > > > > is.
> > > > > > > > > > >
> > > > > > > > > > > > I dont know how to identify
> the
> > >
> > > nic
> > >
> > > > > either
> > > > >
> > > > > > > > > from
> > > > > > > > >
> > > > > > > > > > > the
> > > > > > > > > > >
> > > > > > > > > > > > ifconfig information i have
> here.
> > > > > > > > > > > >
> > > > > > > > > > > > --- John Jolet
> <[EMAIL PROTECTED]>
> > >
> > > wrote:
> > > > > > > > > > > > > On Thu, 2005-10-06 at 07:51
> > >
> > > -0700,
> > >
> > > > > Jide
> > > > >
> > > > > > > > > Osatuyi
>
=== message truncated ===
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users
