Hi Andrea, I have tested again but this time I could go through even though I still get the rsync connection problems. Can you please look into this logs and see what happened? BTW, can you imagine how hard to type the console information here? Basically systemmonitor thing does not work on the OSCAR crispy branch now.
Number Start End Size Type File System Flags 1 1kB 512MB 512MB primary linux-swap 2 512MB 47GB primary ext3 boot Load software RAID modules. modprobe: module linear not found. modprobe: failed to load module linear modprobe: module raid0 not found. modprobe: failed to load module raid0 modprobe: module raid1 not found. modprobe: failed to load module raid1 modprobe: module raid5 not found. modprobe: failed to load module raid5 modprobe: module raid6 not found. modprobe: failed to load module raid6 modprobe: module raid10 not found. modprobe: failed to load module raid10 Load device mapper driver (for LVM). modprobe: module dm-mod not found. modprobe: failed to load module dm-mod Load additional filesystem drivers. modprobe: module ext2 not found. modprobe: failed to load module ext2 modprobe: module ext3 not found. modprobe: failed to load module ext3 modprobe: module fat not found. modprobe: failed to load module fat modprobe: module vfat not found. modprobe: failed to load module vfat mkswap -v1 /dev/sda1 || shellout Setting up swapspace version 1, size = 511995 kB no label, UUID=7b4619bc-2654-4042-965a-981deb1f4365 swapon /dev/sda1 || shellout mke2fs -q -j /dev/sda2 || shellout mkdir -p /a/ || shellout mount /dev/sda2 /a/ || shellout mount sysfs /a/sys -t sysfs -o defaults || shellout Evaluating image size. Report task started. Quietly installing image... nc: connect: Connection refused /rsync -aHs --exclude=lost+found/ --exclude=/proc/* --numeric-ids 129.79.246.46::oscarimage/ /a/ -nc: connect: Connection refused |nc: connect: Connection refused -nc: connect: Connection refused |nc: connect: Connection refused -nc: connect: Connection refused |nc: connect: Connection refused -nc: connect: Connection refused |nc: connect: Connection refused -nc: connect: Connection refused |nc: connect: Connection refused -nc: connect: Connection refused |Report task stopped. mc: connect: Connection refused / stop_spinner rsync -av --numeric-ids 129.79.246.46::overrides/oscarimage/ /a/ receiving file list ... done ./ sent 116 bytes received 66 bytes 364.00 bytes/sec total size is 0 speedup is 0.00 rsync -av --numeric-ids 129.79.246.46::overrides/peach1/ /a/ receiving file list ... done rsync: link_stat "/peach1/." (in overrides) failed: No such file or directory (2) sent 4 bytes received 9 bytes 8.67 bytes/sec total size is 0 speedup is 0.00 rsync error: some files could not be transferred (code 23) at main.c(1524) [receiver=3.0.0pre4] Override directory peach1 doesn't seem to exist, but that may be OK. Editing files for actual disk configuration... /dev/sda -> /dev/sda /etc/fstab /etc/systemconfig/systemconfig.conf mount /dev/ /a/dev/ -o bind || shellout Detecting systemconfigurator: --- systemconfigurator - 2.2.11 Written by Sean Dague, Donghwa John Kim, et al. Copyright (C) 2001-2002 International Business Machines This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. --- 2007-11-29 11:22:31 [Network :: Line 58] Setting up network type Network:: LinuxConf 2007-11-29 12:4:56 [main :: Line 479] All done. I have modified the following files: /etc/sysconfig/network /etc/sysconfig/network-scripts/ifcfg-eth0 run_post_install_scripts >>> 10all.fix_swap_uuids >>> 95all.monitored_rebooted >>> 99all.harmless_example_script I live in /var/lib/systemimager/scripts/post-install See: /var/lib/systemimager/scripts/post-install/README for details. umount /a/sys || mount -no remount,ro /a//sys || shellout umount /a/proc || mount -no remount,ro /a//proc || shellout umount /a/dev || mount -no remount,ro /a//dev || shellout umount /a/ || mount -no remount,ro /a// || shellout Imaging completed nc: connect: Connection refused nc: connect: Connection refused Terminated Regards, - DongInn Andrea Righi wrote: > DongInn Kim wrote: >> [EMAIL PROTECTED] SPECS]# rsync --version >> rsync version 2.6.8 protocol version 29 >> Copyright (C) 1996-2006 by Andrew Tridgell, Wayne Davison, and others. >> <http://rsync.samba.org/> >> Capabilities: 64-bit files, socketpairs, hard links, no ACLs, no xattrs, >> symlinks, batchfiles, >> inplace, IPv6, 64-bit system inums, 64-bit internal inums >> >> rsync comes with ABSOLUTELY NO WARRANTY. This is free software, and you >> are welcome to redistribute it under certain conditions. See the GNU >> General Public Licence for details. > > OK. > >> [EMAIL PROTECTED] SPECS]# which rsync >> /usr/bin/rsync >> >> OK, I realized that /etc/init.d/systemimager-server-rsyncd is just a script >> to run the ordinary rsync program as a daemon with the systemimager specific >> rsync configuration. I thought systemimager-server has its own rsync daemon >> which is totally different from the ordinary rsync. >> > > Yes, systemimager at the image server side just uses the same rsync shipped > with > the distribution of your image server. > > What about the rsync client (the imaging client)? do you see some errors or > warnings? > > -Andrea ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ sisuite-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sisuite-users
