Replying to myself here...
I have now tested it more thoroughly, and I get some surprising results
(surprising to me at least). When running a single-threaded stackless
scheduler I get the expected 100% CPU load when i try to stress it, but
running two threads on my dual core machine yielded a CPU load of
approximately 130%? What gives?
Seeing as the global interpreter lock should get in the way of utilizing
more than one core shouldn't I be seeing that using two threads (and two
schedulers) would yield the same 100% CPU load as using a single thread did?
I'm not here to start another "global interpreter lock" discussion, so
if there are obvious answers to be found in the mailing list archives
just tell me to RTFM :)
Best regards
Mads
Mads Darø Kristensen wrote:
Hi Jeff.
Jeff Senn wrote:
Hm. Do you mean "thread" or "process"? Because of the GIL you cannot use
threads to overlap python
execution within one interpreter (this has been discussed at great
length here many times...) --
depending on how you are measuring, perhaps you would aspire to get
200%, 400% ...etc for multicore....
I mean thread, not process. And what I meant with 100% utilization was
200% for the 2-core Mac I tested on... At least that was what I thought
I saw - I'll have to test that again some time :-)
Best regards
Mads
_______________________________________________
Stackless mailing list
[email protected]
http://www.stackless.com/mailman/listinfo/stackless
--
Med venlig hilsen / Best regards
Mads D. Kristensen
Blog: http://kedeligdata.blogspot.com/
Work homepage: http://www.daimi.au.dk/~madsk
_______________________________________________
Stackless mailing list
[email protected]
http://www.stackless.com/mailman/listinfo/stackless
