Hello Todd, Oleg will be able to help you with technical questions once he is back from vacation - at the end of this week. Sorry about the delay. Best Regards,
Olga S Filippova Elphel, Inc. On Thu, Aug 20, 2015 at 4:12 AM, TODD KUENY <tku...@redzone.com> wrote: > I have installed the KUbuntu 4.0 distribution for NFS flashing on a > VirtualBox VM hosted on windows. > > NFS is set up and I can mount the file system from other Linux boxes. > > Folder structure on KUbuntu: > > /nfs/7.1.5/* > /nfs/8.2.16/* > > I have loaded the appropriate images and other files into the NFS > subfolder. > > I have an Elphel connected via hard wire. I have an old, non-KUbuntu > flash system running that works with 7.1.5 on a different VM on the same > host under Ubuntu 14.04. > > The KUbuntu panel with the tools to search for Elphel’s, do Net Boot, etc. > are present and work. > > I can find Elphel’s and they appear in the panel. > > I can access them via the web browser. > > What I expect to happen is that if I open a “Found” Elphel’s web browser I > should be able to select the firmware page, enter the /nfs/7.1.5/kernel > path and have the Elphel reflash. > > If I connect an older Elphel (one that should work with 7.1.5) with > non-MICRON flash once I click the reflash the web frame with the pinkish > reflash box reports the connection was reset and nothing happens. > > If I connect a newer Elphel (presumably working with 8.X) with MICRON > flash and do the same thing (but selecting the 8.2.16 image) I get a 404 > error in the pinkish box. > > If I try the netboot route (resetting the Elphel appropriately) dropping > the appropriate software for the board type onto netboot one of two things > happens: > > A) the progress dialog appears at 1% and never moves. > > B) the progress dialog appears and processes to 100% within a few seconds > with corresponding network activity. > > In both case the Elphel’s are not reflashed and whatever was there > previously (working or not) remains there. > > I think this should at least work with the later Elphel boards and 8.2.16. > > I presume this all works and I am missing something stupid - any help > would be appreciated. > > Thanks > Todd > > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
