Todd, Here <https://wiki.elphel.com/wiki/Parsedit.php#change_multiple_ports> - it's linked from the manual but hard to locate (I'll update the docs).
Example: > http://192.168.0.9/parsedit.php?immediate&sensor_port=0&COLOR=5&*COLOR=0xf PARNAME=value&***PARNAME=bitmask bitmask - 4-bits, where bitmask[0] corresponds to port 0, ... bitmask values: 1 - enabled, 0 - disabled Regards, Oleg On Wed, Aug 29, 2018 at 12:09 PM TODD KUENY <tku...@redzone.com> wrote: > Oleg - > > I recall asking about this and the upshot was that adding a ‘*’ on some > PHP parameters would synchronize parameter settings across imagers, either > for settings in general or for capturing images. > > I can’t seem to locate this on the 393 web site. > > Do you recall or can you help? > > Thanks > Todd > > > _______________________________________________ > Support-list mailing list > Support-list@support.elphel.com > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
