Hi everybody, I have three 353 Cameras with the Firmware 8.0.9.2, 8.2.16 and 8.0.7.4.
I have troubles with the one with the Firmware 8.0.9.2. *** 1) Just Black/White. If I change with the Camera Control Interface to Color nothing happens. Its shows just Black/White. At the other cameras, I see at the color histogram just a white line. At all other ones all colors (blue, yellow, red, white) My Question is: is maybe the lighthttpd broken? Is there a config file at the camera where i can modify the values over the command line? *** 2) The Camera is very slowly. The Network Switch shows me a 100MB Connection. But if I dowload a raw image, it feels 10 times slower than at the other ones ... *** 3) The Camera Control Interface is very slowly. At the first time I changed the compression rate of the Image and it ignore is. After a restart (power off/on) I was aible to change the values ... exept black/white to color ... Is the camera broken? Is there a better possibility to check the logs? (I have just /var/log and dmesg) and everythings looks OK) ... I need other opinions and better Ideas to find my problem. Any Idea? Any comments? regards, Manuel PS: The Enviroment: Two cameras are attached with the PoE Switch, exept the troublemaker. She is connected with the PoE Injector directly to the Network. _______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com