Kai,
We did not use 353 for for a long time, and yes, I know that the flash memory
in the camera deteriorates after years, so reflashing helps. I have software
installed on one computer and can try to reflash if you send us the camera
boards.
Andrey
---- On Sat, 20 Jan 2024 04:08:28 -0700 Kai Schaeffer <k...@schaeffer-ag.de>
wrote ---
Hi everyone,
I have a 353 based camera that is not reacting anymore. It's still
booting up and the LEDs on the network connector start to blink, but I
can't access it. Also a ping is not working. So, I thought I should try
to reflash it. I used the kubuntu-elphel-4.iso to do so. After some
difficulties, the reflashing is actually working now. During the
flashing I could even ping the camera (192.168.0.9) and login via
telnet. But after a reboot, the camera is still not accessible.
Actually I did something else: when I was still fighting with the
flashing, I took a fresh and working 353 controller board and tried the
flashing there as well. So, now I also reflashed a working board and it
stopped working after it. It's now the same behavior as with the other one.
As the image I used the image353-8.2.16.tar.gz.
What am I doing wrong?
Thank you,
Kai
--
Schaeffer AG
Dipl.-Phys. Kai Schaeffer Vorstand
Nahmitzer Damm 32 Tel. +49-30-8058695-25
12277 Berlin FAX: +49-30-8058695-33
http://www.schaeffer-ag.de
HRB 93611 B, Amtsgericht Berlin Charlottenburg
Vorstand: Jörg Schaeffer, Kai Schaeffer
Aufsichtsrat: Dr. Karsten Mühlenfeld (Vorsitzender)
_______________________________________________
Support-list mailing list
mailto:Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
_______________________________________________
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
