I'm now using v4 and I have the same issue.
I added two routes to my test router: 10.0.0.0/32 & 12.0.0.0/8 and
SNMPGetTable returns both of them on one line as "10.0.0.0","12.0.0.0".
The above routes are clearly not default routes and they should not be
combined.
This appears to happen because SNMPGetList sets the index variable x to 0
for any route whose 2,3 & 4 octet's = '0.0.0' and the following code
combines routes thus identified into row 0.
The function * row := separateright(oid, baseoid + '.');* does return
the correct and full IP address, but after *col := fetch(row, '.');* row
only contains the last three octets. Fetch appears to remove the 1st octet
from the string contained in "row".
"col" does not appear to be used.
If I comment out the *col := fetch(row, '.'); *line, SNMPGetTable works as
expected.
What is that line doing and does it need to be there?
Variable values for the 12.0.0.0 route
BASEOID: 0x5f0704 '1.3.6.1.2.1.4.21.1.1'
OID: 0x5b2f0 '1.3.6.1.2.1.4.21.1.1.12.0.0.0'
ROW 0x3b14b20 '0.0.0'
Network/Mask Proto Age Slot Cost NextHop Address AS
------------------- ------ --------- ---- --------- ---------------- -----
10.0.0.0/32 Static 40 1 1 192.168.170.254
12.0.0.0/8 Static 4 1 1 192.168.170.254
192.168.170.128/25 Direct 12562 1 0 192.168.170.254
192.168.255.78/32 Direct 12562 1 0 192.168.255.78
------------------------------------------------------------------------------
AppSumo Presents a FREE Video for the SourceForge Community by Eric
Ries, the creator of the Lean Startup Methodology on "Lean Startup
Secrets Revealed." This video shows you how to validate your ideas,
optimize your ideas and identify your business strategy.
http://p.sf.net/sfu/appsumosfdev2dev
_______________________________________________
synalist-public mailing list
synalist-public@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/synalist-public
