Hi, I have tested with D-Link DWA-140 rev B2G:
run0 at uhub0 port 1 "Ralink 11n Adapter" rev 1.10/1.01 addr 2 run0: MAC/BBP RT3071 (rev 0x021C), RF RT3022 (MIMO 2T2R), address 14:d6:4d:49:73:4e with this diff nothing works. It doesn't find any access point. 2014-05-15 19:32 GMT+04:00 Fred <open...@crowsons.com>: > On 05/15/14 10:35, Stefan Sperling wrote: > >> This firmware update to version 0.33 is a prequisite for >> newer run(4) devices which are not yet supported. >> >> Can active users of run(4) devices please test this update >> to make sure no regressions are introduced for already working >> devices? I don't have a supported run(4) device to test with. >> >> cd /usr/src/sys/dev/microcode/rum # yes, rum with m >> patch < this-patch >> make obj >> make depend >> sudo make install >> >> I've obtained permission from Mediatek/Ralink to distribute this >> firmware update under the terms in /etc/firmware/run-license. >> >> > Hi, > > Tested with the at TP-Link TL-WN727N USB Wifi device: > > May 15 13:24:46 x41 /bsd: run0 at uhub0 port 4 "Ralink 802.11 n WLAN" rev > 2.00/1.01 addr 3 > May 15 13:24:46 x41 /bsd: run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 > (MIMO 1T1R), address 74:ea:3a:8a:b6:8f > > No regressions with this diff. > > Thanks > > Fred > >
