my gosh, put on a nice external 10 mhz reference like from your standard and test against itself :-)
Bob Camp > Hi > > Well I popped the top off of the beast. As far as I can tell, everything > is there and there are no big burn marks on any of the boards. Judging > from the edges of the cards, they have not been out of their sockets very > often. > > The alignment procedure in the manual is pretty straightforward for the > multiplier and the input level stuff. The part on setting up the > interpolators looks a bit crazy. All of it is written in the "first set > everything to XXX and then proceed" fashion. I'd much prefer to run > through it changing the absolute minimum number of things. > > The most fun in the whole thing is when they have just gone through and > set up a super counter. Then to set the standard on frequency, they use an > oscilloscope and watch the beat note ..... > > So much fun. > > Bob > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- Dr. Don Latham AJ7LL Six Mile Systems LLP 17850 Six Mile Road POB 134 Huson, MT, 59846 VOX 406-626-4304 www.lightningforensics.com www.sixmilesystems.com _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.