I would also make sure you reformat the drive first.  Often I cannot 
boot if I just use DD, If I reformat the drive first (using ext3 or 
Fat32) it works fine.  You can reformat it using Gparted in Ubuntu.

Talk to you soon,
Ryan.

Prajwal Mohan wrote:
> HI Javi,
>    Try using 'bs=4096' with the dd command. I have seen USB key not 
> boot when dd is used without setting byte size.
> Thanks,
> Praj
>
>
> Javier Gálvez Guerrero wrote:
>> I'm using 'dd' in a Ubuntu 8.04 box.
>>
>> The blinking cursor appears with a SanDisk Cruzer Micro (4GB) USB key.
>>
>> I have just tried with a Kingston Datatraveler (2GB) and, instead of 
>> the blinking cursor, I got a "No bootable partition in table" message.
>>
>> Any additional steps to prepare the bootable USB key?
>>
>>
>> Thank you for your help,
>> Javi
>>
>>
>> 2008/9/25 Ryan Gallagher <[EMAIL PROTECTED] 
>> <mailto:[EMAIL PROTECTED]>>
>>
>>     How are you preparing the usb key? Are you just copying over or
>>     using DD from a linux box?
>>
>>
>>     Javier Gálvez Guerrero wrote:
>>>     Hi,
>>>
>>>     I have downloaded both September 23rd and 25th images of Ubuntu
>>>     Mobile from here and
>>>     <http://cdimage.ubuntu.com/ubuntu-mid/intrepid/>, after following
>>>     the instructions here <http://people.ubuntu.com/%7Eogra/mobile/>,
>>>     I haven't been able to boot my Samsung Q1 (note it is not an
>>>     Ultra version). As I was said it should work both in Ultra an
>>>     non-Ultra versions of the UMPC, I thought I wouldn't have any
>>>     problem at all, but that's not the case.
>>>
>>>     I've set the BIOS booting priorities properly and I've checked
>>>     the two images in 3 different devices (2 laptops and the UMPC)
>>>     and all terminals and images have the same problem: instead of
>>>     booting Ubuntu a blinking cursor appears in the top left corner
>>>     of the screen, no activity at all, neither in the USB nor in the
>>>     UMPC (I have waited for more than 15 minutes...).
>>>
>>>     Should I have any special USB key to make it boot?
>>>
>>>     Any help would be much appreciated as I'm quite interested in
>>>     developing and testing under this platform. If needed more info,
>>>     please, tell me.
>>>
>>>
>>>     Thank you all,
>>>     Javi
>>>
>>>
>>
>>     --     Ryan Gallagher
>>     CEO
>>     ConnectMeAnywhere Limited
>>
>>     Call me local ... Reach me worldwide!
>>     UK London:  +44 (0)207 099 1077
>>     USA Palo Alto: +1 650.644.1303
>>
>>     www.connectmeanywhere.com <http://www.connectmeanywhere.com>
>>     www.expatreach.com <http://www.expatreach.com>
>>
>>
>>     CONFIDENTIALITY NOTICE
>>
>>     This message and any attachment are confidential and may be 
>> privileged
>>     or otherwise protected from disclosure and solely for the use of the
>>     person(s) or entity to whom it is intended. If you have received 
>> this
>>     message in error and are not the intended recipient, please 
>> notify the
>>     sender immediately and delete this message and any attachment 
>> from your
>>     system. If you are not the intended recipient, be advised that 
>> any use
>>     of this message is prohibited and may be unlawful, and you must 
>> not copy
>>     this message or attachment or disclose the contents to any other 
>> person.
>>
>>        
>>
>

-- 
Ubuntu-mobile mailing list
[email protected]
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-mobile

Reply via email to