Hi I got a new error:
2010-06-02 10:19:09 [6006] [6] INFO: AT2[HSSMSC1]: Phase 2+ is supported 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=1^M 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: 1,1,1 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: <-- OK 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: --> AT+CMEE=2;ATZ;ATQ0 V1 E1 S0=0 &C1^M 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: <-- NO CARRIER No CARRIER? Does that mean I do not get a signal? -----Original Message----- From: Nikos Balkanas [mailto:nbalka...@gmail.com] Sent: 02 June 2010 10:07 To: Peter Lum; users@kannel.org Subject: Re: Urgent! HELP! Hi, It seems that your problem is with your CNMI value. This is modem/manufacturer specific. Try the CNMI=0,0,0,0,1 that the modem gives you. If that doesn't work, try some different values, examples can be found in modems.conf. Or run wvdialconf. You can remove CMEE. BR, Nikos ----- Original Message ----- From: "Peter Lum" <pe...@hotsource.net> To: "'Nikos Balkanas'" <nbalka...@gmail.com>; <users@kannel.org> Sent: Wednesday, June 02, 2010 4:10 AM Subject: RE: Urgent! HELP! > Hi > > I typed AT+CMNI? and got > > +CNMI: 0,0,0,0,1 > > I typed AT&V and got > ACTIVE PROFILE: > E0 Q0 V1 X4 &C1 &D2 &S0 \Q0 > S0:000 S3:013 S4:010 S5:008 S6:000 S7:060 S8:000 S10:002 S18:000 > +CBST: 7,0,1 > +CRLP: 61,61,78,6 > +CR: 0 > +FCLASS: 0 > +CRC: 0 > +CMGF: 0 > +CNMI: 0,0,0,0,1 > +ILRR: 0 > +IPR: 0 > +CMEE: 1 > ^SMGO: 0,0 > +CSMS: 0,1,1,1 > ^SACM: 0,"000000","000000" > ^SLCC: 0 > ^SCKS: 0,1 > +CREG: 0,1 > +CLIP: 0,2 > +CAOC: 0 > +COPS: 0,0,"SGP M1-3GSM" > +CGSMS: 3 > > Also, I am able to send SMS via minicom > > Debug mode kannel.log > AT2[HSSMSC1]: start called > 2010-06-02 08:53:51 [30416] [6] DEBUG: Thread 6 > (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 30416. > 2010-06-02 08:53:51 [30416] [8] DEBUG: Thread 8 > (gw/bb_store_file.c:store_dumper) maps to pid 30416. > 2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: trying to use speed > <115200> from modem definition > 2010-06-02 08:53:51 [30416] [7] DEBUG: Thread 7 > (gw/bb_smscconn.c:sms_router) maps to pid 30416. > 2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: opening device > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x951e478 vs 0x951e478) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. Telnet > mode = 0 > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x95245d8 vs 0x951e478) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x95431f0 vs 0x951e478) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x9555000 vs 0x951e478) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x951e478 vs 0x951e478) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: time to sleep 30.00 > secs. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: gwlist_len = 4 > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x95245d8 vs 0x95245d8) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x95431f0 vs 0x95245d8) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x9555000 vs 0x95245d8) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x951e478 vs 0x95245d8) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message > (0x95245d8 vs 0x95245d8) > 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. > 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: time to sleep 30.00 > secs. > 2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200 > 2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ^M > 2010-06-02 08:53:52 [30416] [5] INFO: Client connected from <127.0.0.1> > 2010-06-02 08:53:52 [30416] [5] DEBUG: Started thread 9 > (gw/bb_boxc.c:function) > 2010-06-02 08:53:52 [30416] [9] DEBUG: Thread 9 (gw/bb_boxc.c:function) > maps > to pid 30416. > 2010-06-02 08:53:52 [30416] [9] DEBUG: Started thread 10 > (gw/bb_boxc.c:boxc_sender) > 2010-06-02 08:53:52 [30416] [10] DEBUG: Thread 10 > (gw/bb_boxc.c:boxc_sender) > maps to pid 30416. > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT^M > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: Closing device > 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: speed is 115200 > 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: opening device > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. Telnet > mode = 0 > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened > 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: Logging in > 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: init device > 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200 > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ATZ^M > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT^M > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT&F^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ATE0^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- ATE0 > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT\Q3^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CPIN?^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CPIN: READY > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CMGF=0^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=?^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: (0,1) > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:54 [30416] [6] INFO: AT2[HSSMSC1]: Phase 2+ is supported > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=1^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: 1,1,1 > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> > AT+CNMI=2,1,0,0,0;+CMEE=2^M > 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- ERROR > 2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Generic error: ERROR > 2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Initialization of > device failed. > 2010-06-02 08:53:54 [30416] [6] INFO: AT2[HSSMSC1]: Closing device > 2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Couldn't connect > (retrying in 10 seconds). > 2010-06-02 08:54:04 [30416] [6] INFO: AT2[HSSMSC1]: opening device > 2010-06-02 08:54:04 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. Telnet > mode = 0 > 2010-06-02 08:54:04 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened > 2010-06-02 08:54:04 [30416] [6] INFO: AT2[HSSMSC1]: Logging in > 2010-06-02 08:54:05 [30416] [6] INFO: AT2[HSSMSC1]: init device > 2010-06-02 08:54:05 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200 > > Any idea what's going on? > > > Thanks! > > -----Original Message----- > From: Nikos Balkanas [mailto:nbalka...@gmail.com] > Sent: 02 June 2010 08:39 > To: pe...@hotsource.net; users@kannel.org > Subject: Re: Urgent! HELP! > > Hi, > > As Rene stated, ALWAYS post debug level logs to this group. Lastly type > AT+CNMI=? to your modem using minicom or other serial software to see what > modes it supports. Or you can get wvdialconf to get a working init-string. > > BR, > Nikos > ----- Original Message ----- > From: "Rene Kluwen" <rene.klu...@chimit.nl> > To: <pe...@hotsource.net>; <users@kannel.org> > Sent: Tuesday, June 01, 2010 8:04 PM > Subject: RE: Urgent! HELP! > > >> What do you get if you set log-level to 'debug' (0)? >> Do you see which command exactly gives the error? >> >> Here, you can find an overview of possibly possible init strings: >> http://alumni.ipt.pt/~pmad/s35i_c35i_m35i_atc_commandset_v01.pdf. >> >> == Rene >> >> >> -----Original Message----- >> From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On >> Behalf >> Of pe...@hotsource.net >> Sent: dinsdag 1 juni 2010 17:30 >> To: users@kannel.org >> Subject: Urgent! HELP! >> >> Hi >> >> I have 3 days trying to resolved this and has even replaced my GSM >> modem but still unresolved... >> >> Anyone knows the init-string for the GSM modem MC37i? (cinterion mc37i >> or siemens MC37i) >> >> I tried many variations of CMNI=, etc but still couldn't get Kannel to >> run smoothly. >> >> This is my latest: >> group = modems >> id = siemens_m37i >> name = "Siemens M37i" >> detect-string = "Cinterion" >> detect-string2 = "MC37i" >> speed= 115200 >> #init-string = "AT+CNMI=2,0,0,2,1;+CMGF=0;+CMEE=2" >> init-string = "AT+CNMI=2,1,0,0,0;+CMEE=2" >> enable-hwhs = "AT\\Q3" >> #keepalive-cmd = "AT+CBC;+CSQ" >> >> >> I keep getting this error inj kannel.log >> >> opening device >> 2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: Logging in >> 2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: init device >> 2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: speed set to 115200 >> 2010-06-01 23:18:51 [12804] [6] INFO: AT2[HSSMSC1]: Phase 2+ is supported >> 2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Generic error: ERROR >> 2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Initialization of >> device failed. >> 2010-06-01 23:18:51 [12804] [6] INFO: AT2[HSSMSC1]: Closing device >> 2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Couldn't connect >> (retrying in 10 seconds). >> 2010-06-01 23:19:01 [12804] [6] INFO: AT2[HSSMSC1]: opening device >> 2010-06-01 23:19:01 [12804] [6] INFO: AT2[HSSMSC1]: Logging in >> 2010-06-01 23:19:02 [12804] [6] INFO: AT2[HSSMSC1]: init device >> 2010-06-01 23:19:02 [12804] [6] INFO: AT2[HSSMSC1]: speed set to 115200 >> >> >> HELP!! HELP!! >> >> >> >> >
