OK, just to confirm, I tried sending SMS using minicom and it works.. so it is not the signal problem.
-----Original Message----- From: Nikos Balkanas [mailto:nbalka...@gmail.com] Sent: 02 June 2010 10:42 To: Peter Lum; users@kannel.org Subject: Re: Urgent! HELP! Check your SIM with another mobile. Also put back CNMI. Nikos ----- Original Message ----- From: "Peter Lum" <pe...@hotsource.net> To: "'Nikos Balkanas'" <nbalka...@gmail.com>; <users@kannel.org> Sent: Wednesday, June 02, 2010 5:35 AM Subject: RE: Urgent! HELP! > Hi > > I got a new error: > > 2010-06-02 10:19:09 [6006] [6] INFO: AT2[HSSMSC1]: Phase 2+ is supported > 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=1^M > 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: 1,1,1 > 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: <-- OK > 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: --> AT+CMEE=2;ATZ;ATQ0 > V1 E1 S0=0 &C1^M > 2010-06-02 10:19:09 [6006] [6] DEBUG: AT2[HSSMSC1]: <-- NO CARRIER > > No CARRIER? Does that mean I do not get a signal? > > -----Original Message----- > From: Nikos Balkanas [mailto:nbalka...@gmail.com] > Sent: 02 June 2010 10:07 > To: Peter Lum; users@kannel.org > Subject: Re: Urgent! HELP! > > Hi, > > It seems that your problem is with your CNMI value. This is > modem/manufacturer specific. Try the CNMI=0,0,0,0,1 that the modem gives > you. If that doesn't work, try some different values, examples can be > found > in modems.conf. Or run wvdialconf. You can remove CMEE. > > BR, > Nikos > ----- Original Message ----- > From: "Peter Lum" <pe...@hotsource.net> > To: "'Nikos Balkanas'" <nbalka...@gmail.com>; <users@kannel.org> > Sent: Wednesday, June 02, 2010 4:10 AM > Subject: RE: Urgent! HELP! > > >> Hi >> >> I typed AT+CMNI? and got >> >> +CNMI: 0,0,0,0,1 >> >> I typed AT&V and got >> ACTIVE PROFILE: >> E0 Q0 V1 X4 &C1 &D2 &S0 \Q0 >> S0:000 S3:013 S4:010 S5:008 S6:000 S7:060 S8:000 S10:002 S18:000 >> +CBST: 7,0,1 >> +CRLP: 61,61,78,6 >> +CR: 0 >> +FCLASS: 0 >> +CRC: 0 >> +CMGF: 0 >> +CNMI: 0,0,0,0,1 >> +ILRR: 0 >> +IPR: 0 >> +CMEE: 1 >> ^SMGO: 0,0 >> +CSMS: 0,1,1,1 >> ^SACM: 0,"000000","000000" >> ^SLCC: 0 >> ^SCKS: 0,1 >> +CREG: 0,1 >> +CLIP: 0,2 >> +CAOC: 0 >> +COPS: 0,0,"SGP M1-3GSM" >> +CGSMS: 3 >> >> Also, I am able to send SMS via minicom >> >> Debug mode kannel.log >> AT2[HSSMSC1]: start called >> 2010-06-02 08:53:51 [30416] [6] DEBUG: Thread 6 >> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 30416. >> 2010-06-02 08:53:51 [30416] [8] DEBUG: Thread 8 >> (gw/bb_store_file.c:store_dumper) maps to pid 30416. >> 2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: trying to use speed >> <115200> from modem definition >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Thread 7 >> (gw/bb_smscconn.c:sms_router) maps to pid 30416. >> 2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: opening device >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x951e478 vs 0x951e478) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. >> Telnet >> mode = 0 >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x95245d8 vs 0x951e478) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x95431f0 vs 0x951e478) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x9555000 vs 0x951e478) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x951e478 vs 0x951e478) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: time to sleep 30.00 >> secs. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: gwlist_len = 4 >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x95245d8 vs 0x95245d8) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x95431f0 vs 0x95245d8) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x9555000 vs 0x95245d8) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x951e478 vs 0x95245d8) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message >> (0x95245d8 vs 0x95245d8) >> 2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued. >> 2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: time to sleep 30.00 >> secs. >> 2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200 >> 2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ^M >> 2010-06-02 08:53:52 [30416] [5] INFO: Client connected from <127.0.0.1> >> 2010-06-02 08:53:52 [30416] [5] DEBUG: Started thread 9 >> (gw/bb_boxc.c:function) >> 2010-06-02 08:53:52 [30416] [9] DEBUG: Thread 9 (gw/bb_boxc.c:function) >> maps >> to pid 30416. >> 2010-06-02 08:53:52 [30416] [9] DEBUG: Started thread 10 >> (gw/bb_boxc.c:boxc_sender) >> 2010-06-02 08:53:52 [30416] [10] DEBUG: Thread 10 >> (gw/bb_boxc.c:boxc_sender) >> maps to pid 30416. >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT^M >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: Closing device >> 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: speed is 115200 >> 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: opening device >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. >> Telnet >> mode = 0 >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened >> 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: Logging in >> 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: init device >> 2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200 >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ATZ^M >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT^M >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT&F^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ATE0^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- ATE0 >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT\Q3^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CPIN?^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CPIN: READY >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CMGF=0^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=?^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: (0,1) >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:54 [30416] [6] INFO: AT2[HSSMSC1]: Phase 2+ is supported >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=1^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: 1,1,1 >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> >> AT+CNMI=2,1,0,0,0;+CMEE=2^M >> 2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- ERROR >> 2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Generic error: ERROR >> 2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Initialization of >> device failed. >> 2010-06-02 08:53:54 [30416] [6] INFO: AT2[HSSMSC1]: Closing device >> 2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Couldn't connect >> (retrying in 10 seconds). >> 2010-06-02 08:54:04 [30416] [6] INFO: AT2[HSSMSC1]: opening device >> 2010-06-02 08:54:04 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. >> Telnet >> mode = 0 >> 2010-06-02 08:54:04 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened >> 2010-06-02 08:54:04 [30416] [6] INFO: AT2[HSSMSC1]: Logging in >> 2010-06-02 08:54:05 [30416] [6] INFO: AT2[HSSMSC1]: init device >> 2010-06-02 08:54:05 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200 >> >> Any idea what's going on? >> >> >> Thanks! >> >> -----Original Message----- >> From: Nikos Balkanas [mailto:nbalka...@gmail.com] >> Sent: 02 June 2010 08:39 >> To: pe...@hotsource.net; users@kannel.org >> Subject: Re: Urgent! HELP! >> >> Hi, >> >> As Rene stated, ALWAYS post debug level logs to this group. Lastly type >> AT+CNMI=? to your modem using minicom or other serial software to see >> what >> modes it supports. Or you can get wvdialconf to get a working >> init-string. >> >> BR, >> Nikos >> ----- Original Message ----- >> From: "Rene Kluwen" <rene.klu...@chimit.nl> >> To: <pe...@hotsource.net>; <users@kannel.org> >> Sent: Tuesday, June 01, 2010 8:04 PM >> Subject: RE: Urgent! HELP! >> >> >>> What do you get if you set log-level to 'debug' (0)? >>> Do you see which command exactly gives the error? >>> >>> Here, you can find an overview of possibly possible init strings: >>> http://alumni.ipt.pt/~pmad/s35i_c35i_m35i_atc_commandset_v01.pdf. >>> >>> == Rene >>> >>> >>> -----Original Message----- >>> From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On >>> Behalf >>> Of pe...@hotsource.net >>> Sent: dinsdag 1 juni 2010 17:30 >>> To: users@kannel.org >>> Subject: Urgent! HELP! >>> >>> Hi >>> >>> I have 3 days trying to resolved this and has even replaced my GSM >>> modem but still unresolved... >>> >>> Anyone knows the init-string for the GSM modem MC37i? (cinterion mc37i >>> or siemens MC37i) >>> >>> I tried many variations of CMNI=, etc but still couldn't get Kannel to >>> run smoothly. >>> >>> This is my latest: >>> group = modems >>> id = siemens_m37i >>> name = "Siemens M37i" >>> detect-string = "Cinterion" >>> detect-string2 = "MC37i" >>> speed= 115200 >>> #init-string = "AT+CNMI=2,0,0,2,1;+CMGF=0;+CMEE=2" >>> init-string = "AT+CNMI=2,1,0,0,0;+CMEE=2" >>> enable-hwhs = "AT\\Q3" >>> #keepalive-cmd = "AT+CBC;+CSQ" >>> >>> >>> I keep getting this error inj kannel.log >>> >>> opening device >>> 2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: Logging in >>> 2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: init device >>> 2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: speed set to 115200 >>> 2010-06-01 23:18:51 [12804] [6] INFO: AT2[HSSMSC1]: Phase 2+ is >>> supported >>> 2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Generic error: >>> ERROR >>> 2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Initialization of >>> device failed. >>> 2010-06-01 23:18:51 [12804] [6] INFO: AT2[HSSMSC1]: Closing device >>> 2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Couldn't connect >>> (retrying in 10 seconds). >>> 2010-06-01 23:19:01 [12804] [6] INFO: AT2[HSSMSC1]: opening device >>> 2010-06-01 23:19:01 [12804] [6] INFO: AT2[HSSMSC1]: Logging in >>> 2010-06-01 23:19:02 [12804] [6] INFO: AT2[HSSMSC1]: init device >>> 2010-06-01 23:19:02 [12804] [6] INFO: AT2[HSSMSC1]: speed set to 115200 >>> >>> >>> HELP!! HELP!! >>> >>> >>> >>> >> >
