This is normal behaviour. The notification is sent until the message is fetched.

 Lets do this step by step:

1. Switch to Mbuni CVS to make trouble-shooting more worthwhile
2. When the notification is sent, the URL will be quoted in the log file  
(something like "Preparing to notify with URL ..."). Capture that URL, and show 
it.

mmsproxy handles MM1 transactions: Send and receive to/from phone. mmsrelay 
handles routing. If you use CVS, these are now one.


On Nov 17, 2009, at 12:24, aftab hussain wrote:

> Hi, one more thing that is annoying, I keep getting the MMS notifications. 
> When I looked through the logs, mmsrelay try to send the notification after 
> few minutes. What could be the reason for this.
> 
> Best Regrads,
> 
> Aftab Hussain
> 
> On Tue, Nov 17, 2009 at 2:19 PM, aftab hussain <aftab.huss...@seecs.edu.pk> 
> wrote:
> Hi all,
>         I am quite stuck here. Please help me. I have even tried to access 
> the URL sent by mmsrelay via mms notification sms to the mobile using 'lynx', 
> it gives 404 not found error. The mobile phone does recieve the notification 
> sms and as Paul suggested that notification might not reach the mobile phone 
> but I do get the SMS and the GPRS icon is also crossed out during the SMS 
> reception.
> 
> Doea any one know what mbuni component, MMSPROXY or MMSRELAY will show that 
> the mobile phone is tryiing to fetch the MMS coontent. How should I further 
> proceed from here. In my config file I only use 'core' and 'mbuni' groups. Do 
> I have to use other groups as well and if yes what are the groups and what 
> should be there configuration.
> 
> Best Regards,
> 
> Aftab Hussain
> 
> 2009/11/16 Nikos Balkanas <nbalka...@gmail.com>
> Hi,
>  
> Listen, I am just a newbie, and haven't been able to run it yet. I am still 
> trying to set up my MM4 interface to run it. I only give educated guesses on 
> what might be wrong, I don't have the time to verify from sources.
>  
> AFAIK mbuni will add a /mms/<id> path to the URL. I take hostname to be 
> literal that: FQDN hostname. Otherwise it should be called URL. According to 
> Paul, if mbuni adds a port to the hostname, and then a path, and you put a 
> path instead of a host, the URL might look like:
>  
> http://www.host.com/mms/mms1:9000/mms/<id>
>  
> which will be very wrong. By analogy to kannel, hostalias (not hosalias) 
> might be just a cute name to call it in the logs.
> I don't know much to comment on your configuration.
>  
> BR,
> Nikos
> ----- Original Message -----
> From: INSI mobile
> To: Nikos Balkanas
> Cc: users@mbuni.org
> Sent: Monday, November 16, 2009 8:31 AM
> Subject: Re: [Users] MMS Sending Problem
> 
> 
> Thanks Nikos,
> 
> One more question I have, as Paul suggested that the problem might be 
> operator MMSC configuration in the mobile,
> so I thinking of changing the MMSC configuration of mobile, 
> 
> I have the following mmsc conf. 
> 
> Is it correct to give <my public IP>/mms/mm1 in my mobile as mmsc settings?
> 
> group = mbuni
> name = "INSI_MMSC"
> hostname = <my public IP>
> hosalias =  <same IP>
> local-prefixes = 0
> storage-directory = /var/www/mms
> max-send-threads = 1
> send-mail-prog = /usr/sbin/sendmail -f '%f' '%t'
> maximum-send-attempts = 2
> default-message-expiry = 360000
> queue-run-interval = 2
> send-attempt-back-off = 2
> sendsms-url = http://localhost:13013/cgi-bin/sendsms
> sendsms-username = tester
> sendsms-password = foobar
> mms-port = 1981
> mm7-port = 1982
> :
> :
> 
> 2009/11/16 Nikos Balkanas <nbalka...@gmail.com>
> Hi,
>  
> Mbuni should have an internal HTTP server from kannel gwlib. It will post it 
> to the URL it sends you. No need for external web server. If you cannot 
> access it even from your browser, you probably have a firewall issue. To 
> confirm check the URL with lynx (or telnet to the port from the shell) from 
> the server itself.
>  
> BR,
> Nikos
> ----- Original Message -----
> From: INSI mobile
> To: nbalka...@gmail.com
> Cc: users@mbuni.org
> Sent: Sunday, November 15, 2009 2:19 AM
> Subject: Re: [Users] MMS Sending Problem
> 
> Hi Nikos,
>  
> Even I am having the same issue, I  get the  notification, but my Motorola  
> phones(though I didn't try other brands) are
> unable to retrieve the URL, I have the questions:
> 
> The URL doesn't work even from the browser.
> 
> Do I need to run the web server on the box where MMSC is running, if not who 
> is going to receive this URL
> request?
> 
> How does this URL gets routed to MMSC process if WEB server is running? any 
> configuration we need to make in 
> the web server?
> 
> 
> regards,
> Insim.
> 
> 2009/11/14 Nikos Balkanas <nbalka...@gmail.com>
> Hi,
>  
> Since you are receiving the notification OK, everything up to kannel part is 
> working. I don't know much about mbuni, and do not have time to go through 
> the sources. A couple of questions:
>  
> 1) Your smsc-id you are posting "at_dummy=x", is this the smsc-id you have in 
> kannel.conf? If it is the '=x' part should be urlencoded. Better to use 
> another smsc-id name.
>  
> 2) mmsrelay says that the url to fetch the MMS is:
>  
> http://jaroka.seecs.edu.pk/mms/b-qf436.2.x199...@2/wx37
>  
> Have you tried to access it from a browser from your PC?
>  
> 3) smsbox sends notification for the same url.
>  
> 4) mmsproxy gets HTTP request from mobile. However, your mobile sends an HTTP 
> header: 
>  
> X-Mms-Status: Deferred
>  
> I think this maybe a problem.
>  
> Are you getting any DLRs from the attempt? Please post along with mmsproxy 
> access log from the attempt.
>  
> BR,
> Nikos
>  
>  
> ----- Original Message -----
> From: aftab hussain
> To: users@mbuni.org
> Sent: Friday, November 13, 2009 7:46 AM
> Subject: Re: [Users] MMS Sending Problem
> 
> Hi,
>     I have made the changes you asked. But still I am unable to retrieve the 
> MMS after I get the notification on my mobile phone. I am attaching mmsrelay, 
> mmsproxy, mmssend and smsbox log files. I dont know whats going wrong here. I 
> just followed the instructions in the tutorial I mentioned in my first email. 
> An urgent help will be appreciated.
> 
> Best Regards,
> 
> Aftab Hussain
> 
> 2009/11/12 Nikos Balkanas <nbalka...@gmail.com>
> Correction: hostname should be FQDN.
>  
> BR,
> Nikos
> ----- Original Message -----
> From: Nikos Balkanas
> To: users@mbuni.org
> Sent: Thursday, November 12, 2009 4:52 AM
> Subject: Re: [Users] MMS Sending Problem
> 
> Hi,
>  
> I am a newbie as well, so don't take my word as a gospel. I read your link, 
> and i have several issues with it.
> In your configuration I see 3 problems:
>  
> 1) hostname: This is not a valid hostname. hostname is something like 
> "myserver".
> 2) hostname-alias: A more readable form of the above. Why the "/"?
> 3) sendsms-url: I know kannel and this is not a valid sendsms-url. Skip the 
> trailing "&"
>  
> Also forget about homepages. You should receive a push notification, which if 
> you click it should get you to the correct url.
>  
> To help you further you must post your logs.
>  
> BR,
> Nikos
>  
> ----- Original Message -----
> From: aftab hussain
> To: users@mbuni.org
> Sent: Wednesday, November 11, 2009 2:13 PM
> Subject: [Users] MMS Sending Problem
> 
> Hi all,
>         I am trying to use Mbuni and kannel to Send and Recieve SMS/MMS for 
> our departmental work. For the time being I am interested in sending MMS to 
> our faculty and staff. I have found the tutorial of how to send and MMS on 
> the following link. 
> 
>  http://thilani.wordpress.com/2009/07/15/running-mbuni-as-a-mmsc/
> 
> What I am trying to do is to send MMS notification via kannel and this 
> notification has MMS retrieval url. The mobile phone receives the MMS 
> notification but it can't retrieve the MMS. MMS retrieval failed message is 
> shown on the phone. I can see some thing in the mmsproxy log that the phone 
> is trying to receive the content but I dont understand whats wrong. I am 
> using the following configuration.
> 
> -------- mmsc.conf -------------
> 
> group = core
> log-level = 0
> 
> group = mbuni
> name = "My MMSC"
> hostname = my.mbuni.installed.machine/mms
> 
> host-alias = my.mbuni.installed.machine/mms/mm1
> local-prefixes = +92;
> storage-directory = /mms
> max-send-threads = 5
> maximum-send-attempts = 50
> default-message-expiry = 360000
> queue-run-interval = 5
> send-attempt-back-off = 300
> sendsms-url = 
> http://my.kannel.installed.machine:13013/cgi-bin/sendsms?&smsc=at&;
> allow-ip = *.*.*.*
> sendsms-username = tester
> sendsms-password = foobar
> mms-port = 1951
> mm7-port = 1952
> optimize-notification-size=true
> content-adaptation = true
> notify-unprovisioned = yes
> mms-notify-text = "You have received a multimedia message."
> 
> here /mms is the directory in my webserver's htdocs directory. I change the 
> multimetida message settings in the phone and I use specify in the home url 
> as given below:
> 
> homepage = my.mbuni.installed.machine/mms
> 
> Can any help me as to what is wrong with my configuration.
> 
> Best Regards,
> 
> Aftab
> 
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users@mbuni.org
> http://lists.mbuni.org/mailman/listinfo/users
> 
> _______________________________________________
> Users mailing list
> Users@mbuni.org
> http://lists.mbuni.org/mailman/listinfo/users
> 
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users@mbuni.org
> http://lists.mbuni.org/mailman/listinfo/users
> 
> _______________________________________________
> Users mailing list
> Users@mbuni.org
> http://lists.mbuni.org/mailman/listinfo/users
> 
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users@mbuni.org
> http://lists.mbuni.org/mailman/listinfo/users
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users@mbuni.org
> http://lists.mbuni.org/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@mbuni.org
http://lists.mbuni.org/mailman/listinfo/users

Reply via email to