Anatomy of a failed experiment.
Hydrogen loading effects the plasma frequency. I don't believe the nonsense about hydrinos and cracks. Sub atomic particles and the like are just more nonsense at this energy level. Thermal frequencies are terahertz 10 to the twelfth power hertz. At high hydrogen loading the plasma frequency changes to that of hot thermal vibrations 10 to the thirteen power hertz. Obliviously silver will not achieve the high loading required for hot thermal operation. I was shooting for operation at the high microwave band ten to the tenth power hertz. I want a lower plasma frequency. That's why I tried the helium. Maybe I shroud dig out my high voltage spark gap exciter. It delivers a wallop upon breakdown. Then again this thing scares me, maybe not. Frank -----Original Message----- From: Frank Znidarsic <fznidar...@aol.com> To: fznidarsic <fznidar...@aol.com>; vortex-l <vortex-l@eskimo.com> Sent: Sun, Apr 16, 2017 11:43 am Subject: Re: [Vo]:Why Scientists Must Share Their Failures Here is the picture of the latest failed experiment. http://www.angelfire.com/scifi2/zpt/temp/silver.jpg to left hydrogen and helium cylinders. Center signal generator. I was set to square wave for the max possible summation with harmonics. To right silver wire in bottle. Silver was is in a loop to allow circulating currents. RF tuning capacitor to select harmonics. No anomalous energy. If I ever get anomalous energy you can believe me. .............................. I may try my media recorder with android M and android Kit cat. here is my code. //create and instance of media recorder..................................................................... mRecorder = new MediaRecorder(); //start recording button Button StartRecording = (Button) findViewById(R.id.record); //SET UP THE OnCLICK LISTENER FOR Start recording StartRecording.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { if ( mRecorder != null){ //mRecorder.release(); mRecorder.reset(); Log.e("1. ", "Recorder reset"); } toneG.startTone(ToneGenerator.TONE_CDMA_ALERT_CALL_GUARD, 100); sleep(500); //set the path to this apps storage location String path = Environment.getExternalStorageDirectory().getAbsolutePath(); path += "/WatchDog1.mp4"; // Set the Recording parameters....note the mike has to turned on manually try { mRecorder.setVideoSource(MediaRecorder.VideoSource.CAMERA); mRecorder.setOutputFormat(MediaRecorder.OutputFormat.THREE_GPP); // encoder mRecorder.setVideoEncoder(MediaRecorder.VideoEncoder.H263); // mRecorder.setAudioEncoder(MediaRecorder.AudioEncoder.AAC); mRecorder.setOutputFile(path); // mRecorder.setVideoFrameRate(29); // mRecorder.setMaxDuration(10000); // mRecorder.setVideoSize(640, 480); } catch (Exception e) { Log.e("2. ", "Recorder not initalized"); } //start the recorder // makeText(getApplicationContext(), R.string.toast2, LENGTH_SHORT).show(); try { mRecorder.prepare(); } catch (IOException e) { // Log.e(String.valueOf(tag),"Recorder not prepared"); System.out.println("Recorder Prep Error " + e.getMessage()); } { } try { mRecorder.start(); } catch(Exception e){ System.out.println("Recorder not started Error Message= " + e.getMessage()); } } } ); Frank -----Original Message----- From: Frank Znidarsic <fznidar...@aol.com> To: vortex-l <vortex-l@eskimo.com> Sent: Sun, Apr 16, 2017 11:08 am Subject: [Vo]:Why Scientists Must Share Their Failures This may be the problem with the app. Oh what a pain. http://stackoverflow.com/questions/26990816/mediarecorder-issue-on-android-lollipop -----Original Message----- From: Frank Znidarsic <fznidar...@aol.com> To: vortex-l <vortex-l@eskimo.com> Sent: Sun, Apr 16, 2017 10:49 am Subject: Re: [Vo]:Why Scientists Must Share Their Failures Sharing now: Tried a silver 22 gauge wire in hydrogen and then helium at one atm. I put the wire and the gas in a small plastic bottle upside down so in case it blew up it would project no shrapnel. Wires for the RF stimulation enter at the bottom. The wire was stimulated with RF (1 to 100 MHZ) and with a milli watt laser. I did not use my high voltage spark gap exciter but rather a signal generator. No anomalous energy was produced and the arrangement is still setting there doing nothing. So much for that. ............................. On the app side I am trying to get a video recorder up and recording. My last apps did audio. The programming seems similar, however, the error appears "media-recorder failed to start" I have no clue and no help. I may quit this for now as I need to fix the roof, paint, treat for termites, work on one of the cars, clean the cellar, and similar spring time stuff. Frank
