I thought I had Xastir running on my KAM+ many moons ago but today I
seem to be having a fundamental problem. I have everything going and
I'm receiving stations but my TNC will not transmit my position (or
anything else that I'm aware of).
Attached is my TNC log from XASTIR and the startup file I'm using. Can
anyone see anything that might be wrong? By the way, when I set
"myalias" to ECHO I do relay packets so it will transmit, just not from
Xastir. It looks like Xastir isn't putting the TNC in converse mode,
first. I'm not sure how to remedy that, though.
Oh, I'm running version 1.9.3.
73,
Eric W4OTN
http://www.ericsatcom.net
# $Id: tnc-startup.kam,v 1.15 2008/01/16 19:33:58 we7u Exp $
#
# Copyright (C) 2000-2008 The Xastir Group
#
# This is the TNC Startup file for a Kantronics KAM TNC.
# lines that begin with a pound sign are comments.
# Edit this file for your tnc!
#
# Important! Only uncomment if really needed as a fill-in digi:
#myalias ECHO
mygate GATE
#
INTF TERM
#txu on
xflow off
MONITOR ON
MSTAMP OFF
HEADERLN OFF
SCREENL 0
AUTOLF OFF
LFADD OFF
CD SOFT
MCOM OFF/OFF
MCON OFF
FILT OFF
AUTOCR 0
BEACON EVERY 0
BT %
BUDL OFF/OFF
CMS DISC
CONL OFF
CT APRS Network no connected messages supported!
ECHO OFF
FLOW OFF
HID OFF/OFF
#CWID EVERY 0
MSTAMP OFF
PASSALL OFF
#
# Important! Monitor only PID 0xf0 packets:
PID OFF
_______________________________________________
Xastir mailing list
Xastir@xastir.org
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
