Replying to reply... Kevin Oberman wrote:
First, XFree86 is not finding any fonts. Have you installed the standard
font packages/ports? Under 4.7 of FreeBSD, V4.2 of XFree86 is the
default.
Second, host you build a new XF86Config file? The old file from V3.6
of XFree86 will not work very well with V4. I'd try using the built-in
configuration generator to get a good starting point.
XFree86 -configure
Just see what he's got in his output:
Here. What kind of mode is this? I'm not sure you can get this mode even with s3 driver (which he seemingly does not use).[...]
(--) PCI:*(0:11:0) S3 Trio64V2/DX or /GX rev 22, Mem @ 0xe0000000/26
[...]
(II) LoadModule: "vga"
[...]
(--) VGA(0): pixel clocks: 25.180 28.322 25.170 25.170
(II) VGA(0): My Monitor: Using hsync range of 30.00-70.00 kHz
(II) VGA(0): My Monitor: Using vrefresh range of 50.00-120.00 Hz
(II) VGA(0): Not using default mode "640x350" (insufficient memory for mode)
(II) VGA(0): Not using default mode "640x400" (insufficient memory for mode)
[...]
(II) VGA(0): Not using mode "640x480" (no mode of this name)
(II) VGA(0): Not using mode "800x600" (no mode of this name)
(II) VGA(0): Not using mode "1024x768" (no mode of this name)
(II) VGA(0): Not using mode "360x200" (no clock available for mode)
(II) VGA(0): Not using mode "320x200" (no clock available for mode)
(II) VGA(0): Not using mode "320x175" (no clock available for mode)
(--) VGA(0): Virtual size is 416x312 (pitch 416)
(**) VGA(0): Default mode "416x312": 28.3 MHz, 49.2 kHz, 73.8 Hz (D)
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
