There is no support for this built in vga card(XFree86-4.3.0), no vesa support in NetBSD, use your bios to disable this brain dead chip and add an agp or pci vga card that is supported. -Mel
On Tue, 2003-05-27 at 13:44, Jukka Marin wrote: > Hello, > > I have been trying to run XFree on VIA EPIA-M Mini-ITX mainboard, under > NetBSD 1.6.1 (release) and NetBSD 1.6P. First I tried the linux driver > binary, but after the VIA driver was committed to the XFree CVS tree, > I started building XFree by myself. All versions work the same: > > Fatal server error: > Caught signal 11. Server aborting > > I'm including the dmesg output of the system as well as the XFree log. > > NetBSD works just fine on the EPIA-M, it's just that I can't get XFree > running. > > If I can help debugging the problem, please e-mail me and let me know > what to do. Thanks. > > Jukka Marin > [EMAIL PROTECTED] > > ---- > > > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted > to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs). > > XFree86 Version 4.3.99.5 > Release Date: 25 May 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: NetBSD/i386 1.6.1_STABLE [ELF] The NetBSD Foundation, Inc. > Build Date: 27 May 2003 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Tue May 27 20:27:07 2003 > (==) Using config file: "/etc/XF86Config" > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "Panasonic" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "flexpro" > (**) XKB: model: "flexpro" > (**) Option "XkbLayout" "fi" > (**) XKB: layout: "fi" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (**) Option "DisableVidModeExtension" "False" > (**) Option "StandbyTime" "15" > (**) Option "SuspendTime" "20" > (**) Option "OffTime" "30" > (**) Option "Xinerama" "True" > (**) Xinerama: enabled > (--) Using wscons driver in pcvt compatibility mode (version 3.32) > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.7 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on netbsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1106,3123 card 1106,aa01 rev 00 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01 > (II) PCI: 00:0d:0: chip 1106,3044 card 1106,3044 rev 80 class 0c,00,10 hdr 00 > (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 > (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 > (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 > (II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00 > (II) PCI: 00:11:0: chip 1106,3177 card 1106,aa01 rev 00 class 06,01,00 hdr 80 > (II) PCI: 00:11:1: chip 1106,0571 card 1106,aa01 rev 06 class 01,01,8a hdr 00 > (II) PCI: 00:11:5: chip 1106,3059 card 1106,aa01 rev 50 class 04,01,00 hdr 00 > (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 74 class 02,00,00 hdr 00 > (II) PCI: 01:00:0: chip 1106,3122 card 1106,3122 rev 03 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) > (--) PCI:*(1:0:0) VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated > CastleRock graphics rev 3, Mem @ 0xd8000000/26, 0xdc000000/24 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff > (II) Active PCI resource ranges: > [0] -1 0 0xde002000 - 0xde003fff (0x2000) MX[B]E > [1] -1 0 0xde001000 - 0xde001fff (0x1000) MX[B]E > [2] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B]E > [3] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO > [4] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) > [5] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) > [6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E > [7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E > [8] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E > [9] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E > [10] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > [11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [12] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > (II) PCI Memory resource overlap reduced 0xde000000 from 0xdfffffff to 0xde000fff > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xde002000 - 0xde003fff (0x2000) MX[B]E > [1] -1 0 0xde001000 - 0xde001fff (0x1000) MX[B]E > [2] -1 0 0xde000000 - 0xde000fff (0x1000) MX[B]E > [3] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO > [4] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) > [5] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) > [6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E > [7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E > [8] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E > [9] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E > [10] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > [11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [12] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xde002000 - 0xde003fff (0x2000) MX[B]E > [6] -1 0 0xde001000 - 0xde001fff (0x1000) MX[B]E > [7] -1 0 0xde000000 - 0xde000fff (0x1000) MX[B]E > [8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO > [9] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) > [10] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E > [14] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E > [15] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E > [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E > [17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > [18] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension RECORD > (II) LoadModule: "xtrap" > (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a > (II) Module xtrap: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DEC-XTRAP > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 2.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font FreeType > (II) LoadModule: "via" > (II) Loading /usr/X11R6/lib/modules/drivers/via_drv.o > (II) Module via: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 4.1.26 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.7 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) via: driver for VIA chipsets: CLE266 > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (--) Chipset CLE266 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xde002000 - 0xde003fff (0x2000) MX[B]E > [6] -1 0 0xde001000 - 0xde001fff (0x1000) MX[B]E > [7] -1 0 0xde000000 - 0xde000fff (0x1000) MX[B]E > [8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO > [9] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) > [10] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E > [14] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E > [15] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E > [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E > [17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > [18] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xde002000 - 0xde003fff (0x2000) MX[B]E > [6] -1 0 0xde001000 - 0xde001fff (0x1000) MX[B]E > [7] -1 0 0xde000000 - 0xde000fff (0x1000) MX[B]E > [8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO > [9] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) > [10] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E > [17] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E > [18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E > [19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E > [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > [21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [22] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (**) via(0): Depth 24, (--) framebuffer bpp 32 > (==) via(0): RGB weight 888 > (==) via(0): Default visual is TrueColor > (==) via(0): Using HW cursor > (==) via(0): Not using video BIOS to set modes > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (WW) via(0): remove MTRR a0000 - c0000 > (WW) via(0): remove MTRR c0000 - 100000 > (II) via(0): Primary V_BIOS segment is: 0xc000 > (WW) via(0): remove MTRR 0 - 1000 > (--) via(0): Chipset: "CLE266" > (--) via(0): Chipset Rev.: A3 or later > (--) via(0): mapping MMIO @ 0xdc000000 with size 0x9000 > (WW) via(0): remove MTRR dc000000 - dc009000 > (--) via(0): mapping BitBlt MMIO @ 0xdc200000 with size 0x10000 > (WW) via(0): remove MTRR dc200000 - dc210000 > (II) via(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) via(0): Using gamma correction (1.0, 1.0, 1.0) > (--) via(0): videoram = 32768k > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) via(0): VESA BIOS detected > (II) via(0): VESA VBE Version 3.0 > (II) via(0): VESA VBE Total Mem: 32768 kB > (II) via(0): VESA VBE OEM: VIA CLE266 > > (II) via(0): VESA VBE OEM Software Rev: 0.0 > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.2.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) via(0): I2C bus "I2C bus 1" initialized. > (II) via(0): I2C bus "I2C bus 2" initialized. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) via(0): VESA VBE DDC supported > (II) via(0): VESA VBE DDC Level 2 > (II) via(0): VESA VBE DDC transfer in appr. 1 sec. > (II) via(0): VESA VBE DDC read failed > (II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. > (II) via(0): I2C device "I2C bus 1:ddc2" removed. > (II) via(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. > (II) via(0): I2C device "I2C bus 1:ddc2" removed. > (II) via(0): Manufacturer: FUJ Model: 2518 Serial#: 1207959961 > (II) via(0): Year: 2000 Week: 2 > (II) via(0): EDID Version: 1.2 > (II) via(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V > (II) via(0): Sync: Separate Composite > (II) via(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 > (II) via(0): Gamma: 2.00 > (II) via(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) via(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.600 > (II) via(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.297 > (II) via(0): Supported VESA Video Modes: > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] (interlaced) > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): [EMAIL PROTECTED] > (II) via(0): Manufacturer's mask: 0 > (II) via(0): Supported Future Video Modes: > (II) via(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 > (II) via(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 > (II) via(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 > (II) via(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 > (II) via(0): Supported additional Video Mode: > (II) via(0): clock: 67.5 MHz Image Size: 310 x 230 mm > (II) via(0): h_active: 800 h_sync: 840 h_sync_end 920 h_blank_end 1064 h_border: 0 > (II) via(0): v_active: 600 v_sync: 601 v_sync_end 606 v_blanking: 634 v_border: 0 > (II) via(0): Serial No: H0020199 > (II) via(0): Monitor name: FUJITSU e178 > (II) via(0): Ranges: V min: 50 V max: 150 Hz, H min: 30 H max: 70 kHz, PixClock > max 110 MHz > (II) via(0): Panasonic: Using hsync range of 30.00-70.00 kHz > (II) via(0): Panasonic: Using vrefresh range of 50.00-150.00 Hz > (II) via(0): Clock range: 20.00 to 230.00 MHz > (II) via(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1280x960" (hsync out of range) > (II) via(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1280x1024" (hsync out of range) > (II) via(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1280x1024" (hsync out of range) > (II) via(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1600x1200" (hsync out of range) > (II) via(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1600x1200" (hsync out of range) > (II) via(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1600x1200" (hsync out of range) > (II) via(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1600x1200" (hsync out of range) > (II) via(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1600x1200" (hsync out of range) > (II) via(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1792x1344" (hsync out of range) > (II) via(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1856x1392" (hsync out of range) > (II) via(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) > (WW) (1400x1050,Panasonic) mode clock 122MHz exceeds DDC maximum 110MHz > (II) via(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1400x1050" (hsync out of range) > (II) via(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) > (II) via(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) > (II) via(0): Not using mode "1280x768" (no mode of this name) > (--) via(0): Virtual size is 1280x1024 (pitch 1280) > (**) via(0): *Default mode "1024x768": 94.5 MHz (scaled from 956878.3 MHz), 68.7 > kHz, 85.0 Hz > (II) via(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 > +hsync +vsync > (**) via(0): *Default mode "1280x1024": 108.0 MHz (scaled from -133558.3 MHz), 64.0 > kHz, 60.0 Hz > (II) via(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync +vsync > (--) via(0): Display dimensions: (320, 240) mm > (--) via(0): DPI set to (101, 108) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.3.99.5, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (--) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xdc000000 - 0xdcffffff (0x1000000) MS[B] > [1] 0 0 0xd8000000 - 0xdbffffff (0x4000000) MS[B] > [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [7] -1 0 0xde002000 - 0xde003fff (0x2000) MX[B]E > [8] -1 0 0xde001000 - 0xde001fff (0x1000) MX[B]E > [9] -1 0 0xde000000 - 0xde000fff (0x1000) MX[B]E > [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO > [11] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B) > [12] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) > [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]E > [19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]E > [20] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E > [21] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E > [22] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E > [23] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E > [24] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E > [25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (--) via(0): mapping framebuffer @ 0xd8000000 with size 0x2000000 > (WW) via(0): set MTRR d8000000 - da000000 > (--) via(0): Frame buffer start: 0x482d6000, free start: 0x500000 end: 0x2000000 > (--) via(0): mapping MMIO @ 0xdc000000 with size 0x9000 > (WW) via(0): remove MTRR dc000000 - dc009000 > (--) via(0): mapping BitBlt MMIO @ 0xdc200000 with size 0x10000 > (WW) via(0): remove MTRR dc200000 - dc210000 > (II) via(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (WW) via(0): remove MTRR a0000 - b0000 > (II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40. > (II) via(0): I2C device "I2C bus 2:TV" removed. > (II) via(0): I2C device "I2C bus 2:VT1622" registered at address 0x40. > (II) via(0): I2C device "I2C bus 2:VT1622" removed. > (II) via(0): I2C device "I2C bus 2:VT1622" registered at address 0x40. > (II) via(0): I2C device "I2C bus 2:VT1622" removed. > (II) via(0): VIAInternalScreenInit > (II) via(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > 8x8 color pattern filled rectangles > Screen to Screen color expansion > Solid Lines > Dashed Lines > Image Writes > > *** If unresolved symbols were reported above, they might not > *** be the reason for the server aborting. > > Fatal server error: > Caught signal 11. Server aborting > > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > > (II) via(0): I2C device "I2C bus 2:TV" registered at address 0x40. > (II) via(0): I2C device "I2C bus 2:TV" removed. > (WW) via(0): remove MTRR a0000 - b0000 > ---- > > NetBSD 1.6.1 (BABYLET) #1: Sun Apr 6 12:13:16 EEST 2003 > [EMAIL PROTECTED]:/tmp/nb/src/sys/arch/i386/compile/BABYLET > cpu0: IDT Pentium Pro compatible (686-class), 599.74 MHz > cpu0: features 803035<FPU,DE,TSC,MSR,MTRR> > cpu0: features 803035<PGE,MMX> > total memory = 479 MB > avail memory = 441 MB > using 6144 buffers containing 24656 KB of memory > BIOS32 rev. 0 found at 0xfb210 > mainbus0 (root) > pci0 at mainbus0 bus 0: configuration mode 1 > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok > pchb0 at pci0 dev 0 function 0 > pchb0: VIA Technologies product 0x3123 (rev. 0x00) > agp0 at pchb0: aperture at 0xd0000000, size 0x10000000 > ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb091 (rev. 0x00) > pci1 at ppb0 bus 1 > pci1: i/o space, memory space enabled > vga1 at pci1 dev 0 function 0: VIA Technologies product 0x3122 (rev. 0x03) > wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) > wsmux1: connecting to wsdisplay0 > VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, interface > 0x10, revision 0x80) at pci0 dev 13 function 0 not configured > uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x80) > uhci0: interrupting at irq 11 > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 > uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x80) > uhci1: interrupting at irq 12 > usb1 at uhci1: USB revision 1.0 > uhub1 at usb1 > uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x80) > uhci2: interrupting at irq 10 > usb2 at uhci2: USB revision 1.0 > uhub2 at usb2 > uhub2: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 0x82) at > pci0 dev 16 function 3 not configured > pcib0 at pci0 dev 17 function 0 > pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00) > pciide0 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133 controller > pciide0: bus-master DMA support present > pciide0: primary channel configured to compatibility mode > pciide0: disabling primary channel (no drives) > pciide0: secondary channel configured to compatibility mode > pciide0: disabling secondary channel (no drives) > VIA Technologies VT8233/VT8235 AC-97 Audio Controller (audio multimedia, revision > 0x50) at pci0 dev 17 function 5 not configured > vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet > vr0: interrupting at irq 11 > vr0: Ethernet address: 00:40:63:c4:eb:70 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface > ukphy0: OUI 0x0002c6, model 0x0032, rev. 5 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isa0 at pcib0 > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo > com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo > pckbc0 at isa0 port 0x60-0x64 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > lpt0 at isa0 port 0x378-0x37b irq 7 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > sysbeep0 at pcppi0 > isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support > npx0 at isa0 port 0xf0-0xff: using exception 16 > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 > isapnp0: no ISA Plug 'n Play devices found > apm0 at mainbus0: Power Management spec V1.2 > biomask ff65 netmask ff65 ttymask ffe7 > Kernelized RAIDframe activated > IPsec: Initialized Security Association Processing. > boot device: vr0 > root on vr0 > nfs_boot: trying DHCP/BOOTP > nfs_boot: DHCP next-server: 10.1.0.2 > nfs_boot: my_name=joutsen > nfs_boot: my_domain=embedtronics.fi > nfs_boot: my_addr=10.1.0.5 > nfs_boot: my_mask=255.255.255.0 > nfs_boot: gateway=10.1.0.1 > root on 10.1.0.2:/pub/export/nipsu > root file system type: nfs > wsdisplay0: screen 1 added (80x25, vt100 emulation) > wsdisplay0: screen 2 added (80x25, vt100 emulation) > wsdisplay0: screen 3 added (80x25, vt100 emulation) > wsdisplay0: screen 4 added (80x25, vt100 emulation) _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
