Tim, Our current test for the error still going at 3h+, and there is no error.
It was the SET DATABASE PAREMETER(14;1) that kept it going without an error. I think the problem is solved! THANKS! David Ringsmuth From: Timothy Penner via 4D_Tech Sent: Tuesday, November 14, 2017 11:18 AM To: 4D iNug Technical Cc: Timothy Penner Subject: RE: Connection is broken, cannot receive request reply > On our client network we do have a managed switch, but on our test network we > don’t. > The same error happens on both networks. Have you found a network where the error does NOT occur? If you have reproducible sample that causes the issue on multiple networks then then it sounds like the hard part is already done. I would suggest opening a case and submitting the sample for further assistance. -Tim ********************************************************************** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html Options: http://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com ********************************************************************** ********************************************************************** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html Options: http://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **********************************************************************