Hi folks, It has been some time since I have installed an SSL certificate with 4D and I seem to be having little success.
In this case I want to use a wildcard SSL certificate so I found an article that explained what you had to do with the intermediate part of the certificate. I have followed: http://doc.4d.com/4Dv15/4D/15.5/Using-TLS-Protocol.300-3576925.en.html <http://doc.4d.com/4Dv15/4D/15.5/Using-TLS-Protocol.300-3576925.en.html> and http://kb.4d.com/assetid=34856 <http://kb.4d.com/assetid=34856> I believe I have done everything I need to but for the life of me I cannot get a connection to the server via HTTPS. I have tried to get it running on port 19225 but when that did not work I also tried on standard 443 Server is responding fine on HTTP (19223) and the correct ports are open on both Windows firewall and the physical CISCO firewall. Is there anybody out there who has loads of experience can either give me some tips or sell me some time to get this sorted? Regards, Dougie ________________________________________________________ telekinetix Limited- J. Douglas Cryer Phone : 01234 761759 Mobile : 07973 675 218 2nd Floor Broadway House, 4-6 The Broadway, Bedford MK40 2TE Email : [email protected] <mailto:[email protected]> Web : http://www.telekinetix.com <http://www.telekinetix.com/> ________________________________________________________ ********************************************************************** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
