Thanks for posting! > On Mar 16, 2019, at 12:24 PM, Justin Will via 4D_Tech <4d_tech@lists.4d.com> > wrote: > > In case anyone is wondering. I just installed one of these P4800X drives in > our backup server and ran a test conversion of our datafile from v13 to v17. > The datafile is 67gb and the index is about 25gb. 4D has 120gb ram allocated > and running on Windows Server 2016. > > Previously, I was converting the datafile on a HighPoint SSD7101A-1 NVMe M.2 > RAID Controller with 4x Samsung 960 Pro drives in Raid 0. The conversion was > taking about 130 minutes. After swapping out this HighPoint RAID with a > single P4800X drive and running the same conversion I was able to cut the > conversion down to about 80 minutes. > > I hope this is valuable to somebody else. > > Thanks > Justin Will > ********************************************************************** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > **********************************************************************
********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **********************************************************************
