Is the P4800x an HHHL or U2 configuration? and what capacity? Chip
On Sat, 16 Mar 2019 18:24:14 +0000, Justin Will via 4D_Tech wrote: > In case anyone is wondering. I just installed one of these P4800X > drives in our backup server and ran a test conversion of our datafile > from v13 to v17. The datafile is 67gb and the index is about 25gb. > 4D has 120gb ram allocated and running on Windows Server 2016. > > Previously, I was converting the datafile on a HighPoint SSD7101A-1 > NVMe M.2 RAID Controller with 4x Samsung 960 Pro drives in Raid 0. > The conversion was taking about 130 minutes. After swapping out this > HighPoint RAID with a single P4800X drive and running the same > conversion I was able to cut the conversion down to about 80 minutes. > > I hope this is valuable to somebody else. > > Thanks > Justin Will > ********************************************************************** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:[email protected] > ********************************************************************** --------------- Gas is for washing parts Alcohol is for drinkin' Nitromethane is for racing ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
