Thank you Chip. The suggestion, from other users and from my local 4D rep in Australia, is for a 2-step conversion from v11 to v13, then to v17. So, similar to your advice. I will go that direction, and keep a watch out for PICT files.
Regards, Pete -----Original Message----- From: Chip Scheide <[email protected]> Sent: Friday, 11 October 2019 05:10 AM I have done a conversion from v13 - v16, as an experiment. I had no problems. I did not run this for my users. I did some, but not extensive testing. as mentioned elsewhere there are a few things that I believe you can not resolve without a 32 bit version of 4D (PICTs) from inside 4D, and v17 is 64 bit only on windows (I believe). SO you may want/need to go to v15 to resolve the PICT issue before the final conversion to v17. If I am mistaken about the 32 bit/64bit part, or you are *SURE* you have no PICTs, then you should be able to do the conversion in one step. ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
