I suggest v15 because setting transparency when doing PICT conversion is not available in v13
On Thu, 10 Oct 2019 19:58:24 +0000, Peter BURGESS wrote: > Thank you Chip. > The suggestion, from other users and from my local 4D rep in > Australia, is for a 2-step conversion from v11 to v13, then to v17. > So, similar to your advice. > I will go that direction, and keep a watch out for PICT files. > > Regards, > Pete > > -----Original Message----- > From: Chip Scheide <[email protected]> > Sent: Friday, 11 October 2019 05:10 AM > > I have done a conversion from v13 - v16, as an experiment. I had no > problems. > I did not run this for my users. > I did some, but not extensive testing. > > as mentioned elsewhere there are a few things that I believe you can > not resolve without a 32 bit version of 4D (PICTs) from inside 4D, and > v17 is 64 bit only on windows (I believe). > SO you may want/need to go to v15 to resolve the PICT issue before the > final conversion to v17. > > If I am mistaken about the 32 bit/64bit part, or you are *SURE* you > have no PICTs, then you should be able to do the conversion in one step. > > We have done so much, with so little, for so long; We are now qualified to anything with nothing <sigh> - unknown ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
