Hi All
I have two RME cards I would like to combine into one.
problem is the system changes the order of the cards on each boot.
Here is some info on the cards below:
01:08.0 Multimedia audio controller: Xilinx Corporation RME Digi9652
(Hammerfall) (rev 03)
Flags: bus master, stepping, slow devsel, latency 32, IRQ 18
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
01:0a.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP
(rev 6a)
Flags: bus master, medium devsel, latency 255, IRQ 19
Memory at f8ff0000 (32-bit, non-prefetchable) [size=64K]
******************************
jackd setup:
/usr/bin/jackd -R -dalsa -r48000 -p256 -n2 -D -Chw:0,0 -Phw:0,0
*****************************
Please let me know what commands you need running for more info or even if
it's possible, I'm using beta 3 as my main machine ( rock solid so far)
The RME Hammerfall DSp is the main card with 3 adats on.
The other card has two adats and I'm trying to link two DDX3216's, should
be fun!
Cheers
Bob
_______________________________________________
64studio-users mailing list
[email protected]
http://lists.64studio.com/mailman/listinfo/64studio-users
