-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Frank Smith wrote: > Hi All > I have two RME cards I would like to combine into one. > problem is the system changes the order of the cards on each boot. > > Here is some info on the cards below: > > 01:08.0 Multimedia audio controller: Xilinx Corporation RME Digi9652 > (Hammerfall) (rev 03) > Flags: bus master, stepping, slow devsel, latency 32, IRQ 18 > Memory at f9000000 (32-bit, non-prefetchable) [size=16M] > > 01:0a.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP > (rev 6a) > Flags: bus master, medium devsel, latency 255, IRQ 19 > Memory at f8ff0000 (32-bit, non-prefetchable) [size=64K] <snip> > Please let me know what commands you need running for more info or even if > it's possible, I'm using beta 3 as my main machine ( rock solid so far)
It should be possible. Have a look at the hdspconf and hdspmixer applications. From looking at these programs it looks like we can have 3 cards in a given computer. I am not sure if the cards need to be same model to work this way though (ie. they all might need to be 9652s). I only have a single 9652 so I am unable to confirm if this actually works. > The RME Hammerfall DSp is the main card with 3 adats on. > The other card has two adats and I'm trying to link two DDX3216's, should > be fun! > Good luck. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iD8DBQFK5KYswRXgH3rKGfMRAsniAKCcp7Zx81R+xaCG1Z6D/FcmTqPgegCgkNlm cj1nTdAGJde8dkBW4vVgNbY= =4dpb -----END PGP SIGNATURE----- _______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
