I support adoption of this draft. As I said in the 124 meeting, the source standard, ANSI/ASHRAE 135, was changed back in January 2022 and I am glad to see this being updated within the IETF. My thanks to Kerry for stepping up to the task.
On Dec 4, 2025, at 11:42 AM, Shwetha Bhandari via Datatracker < [email protected]> wrote: Subject: Call for adoption: draft-lynn-6lo-rfc8163-bis-01 (Ends 2025-12-18) This message starts a 2-week Call for Adoption for this document. Abstract: Multidrop Serial Bus/Token Passing (MS/TP) is a medium access control method for the RS-485 physical layer and is used primarily in building automation networks. This specification defines the frame format for transmission of IPv6 packets and the method of forming link-local and statelessly autoconfigured IPv6 addresses on MS/TP networks. It obsoletes RFC 8163. File can be retrieved from: https://datatracker.ietf.org/doc/draft-lynn-6lo-rfc8163-bis/ Please reply to this message keeping [email protected] in copy by indicating whether you support or not the adoption of this draft as a WG document. Comments to motivate your preference are highly appreciated. Authors, and WG participants in general, are reminded of the Intellectual Property Rights (IPR) disclosure obligations described in BCP 79 [2]. Appropriate IPR disclosures required for full conformance with the provisions of BCP 78 [1] and BCP 79 [2] must be filed, if you are aware of any. Sanctions available for application to violators of IETF IPR Policy can be found at [3]. Thank you. [1] https://datatracker.ietf.org/doc/bcp78/ [2] https://datatracker.ietf.org/doc/bcp79/ [3] https://datatracker.ietf.org/doc/rfc6701/ _______________________________________________ 6lo mailing list -- [email protected] To unsubscribe send an email to [email protected]
_______________________________________________ 6lo mailing list -- [email protected] To unsubscribe send an email to [email protected]
