Dear all, I support adoption of the document.
Best regards, Younghwan Choi ----------------------------------- YOUNGHWAN CHOI, Ph.D. Principal Researcher, PEC, ETRI Tel +82-42-860-1429 Fax +82-42-860-5404 Email [email protected] -----Original Message----- From: "Shwetha Bhandari via Datatracker" <[email protected]> To: <[email protected]>; <[email protected]>; <[email protected]>; Cc: Sent: 2025-12-05 (금) 01:42:56 (UTC+09:00) Subject: [6lo] Call for adoption: draft-lynn-6lo-rfc8163-bis-01 (Ends 2025-12-18) Subject: Call for adoption: draft-lynn-6lo-rfc8163-bis-01 (Ends 2025-12-18) This message starts a 2-week Call for Adoption for this document. Abstract: Multidrop Serial Bus/Token Passing (MS/TP) is a medium access control method for the RS-485 physical layer and is used primarily in building automation networks. This specification defines the frame format for transmission of IPv6 packets and the method of forming link-local and statelessly autoconfigured IPv6 addresses on MS/TP networks. It obsoletes RFC 8163. File can be retrieved from: https://datatracker.ietf.org/doc/draft-lynn-6lo-rfc8163-bis/ Please reply to this message keeping [email protected] in copy by indicating whether you support or not the adoption of this draft as a WG document. Comments to motivate your preference are highly appreciated. Authors, and WG participants in general, are reminded of the Intellectual Property Rights (IPR) disclosure obligations described in BCP 79 [2]. Appropriate IPR disclosures required for full conformance with the provisions of BCP 78 [1] and BCP 79 [2] must be filed, if you are aware of any. Sanctions available for application to violators of IETF IPR Policy can be found at [3]. Thank you. [1] https://datatracker.ietf.org/doc/bcp78/ [2] https://datatracker.ietf.org/doc/bcp79/ [3] https://datatracker.ietf.org/doc/rfc6701/ _______________________________________________ 6lo mailing list -- [email protected] To unsubscribe send an email to [email protected] _______________________________________________ 6lo mailing list -- [email protected] To unsubscribe send an email to [email protected]
