Tero Kivinen writes: > The format of Hopping timing IE (0x1d) is wrong. It is 5 octets, first > 3 are the Present Hop Time Offset and last two are Hop Dwell Time. > Also the name is wrong, i.e. the entry should be: > > #MLME-SubIE Hopping Timing > Len5 = 5 Byte > SubID = 0x1d (MLME-SubIE Hopping Timing) > Type = Short (0) > Present Hop Time Offset = 3 bytes > Hop Dwell Time = 2 bytes
And as I noted on my other email this IE is wrong. It should be long MLME Nested Payload Channel Hopping IE: #MLME-SubIE Channel hopping IE Len5 = 1 Byte SubID = 0x9 (MLME-SubIE Channel Hopping) Type = Long (1) Hopping Sequence ID = 0x00 (default) -- [email protected] _______________________________________________ 6tisch mailing list [email protected] https://www.ietf.org/mailman/listinfo/6tisch
