Dear Tero, thanks for looking in detail into them. I was actually correcting some of these mistakes. As you said Hopping timing IE (0x1d) is incorrect as Ch.Hopping IE (0x9) is a long format . I will soon push a new version with the examples integrated in the draft.
regards, Xavi 2015-05-18 18:45 GMT+02:00 Tero Kivinen <[email protected]>: > Tero Kivinen writes: > > The format of Hopping timing IE (0x1d) is wrong. It is 5 octets, first > > 3 are the Present Hop Time Offset and last two are Hop Dwell Time. > > Also the name is wrong, i.e. the entry should be: > > > > #MLME-SubIE Hopping Timing > > Len5 = 5 Byte > > SubID = 0x1d (MLME-SubIE Hopping Timing) > > Type = Short (0) > > Present Hop Time Offset = 3 bytes > > Hop Dwell Time = 2 bytes > > And as I noted on my other email this IE is wrong. It should be > long MLME Nested Payload Channel Hopping IE: > > #MLME-SubIE Channel hopping IE > Len5 = 1 Byte > SubID = 0x9 (MLME-SubIE Channel Hopping) > Type = Long (1) > Hopping Sequence ID = 0x00 (default) > -- > [email protected] >
_______________________________________________ 6tisch mailing list [email protected] https://www.ietf.org/mailman/listinfo/6tisch
