Hi guys
I have similar issues like this and what I find is that I need so specify the "real" ip address as the first host entry. This is the case for the multicast beacon and a number of others things, so as something I do with all my Linux machines is that I do the following (Please note that these notes are taken directly out of my install guide which can be found at http://www.accessgrid.org/node/1133): Hosts File As part of the configuration of the network, where you may have selected to use Static Ip Address and entered the hostname manually, you will mostly likely have to edit your /etc/hosts file. Note, you only have to edit this file if you are using a static ip address. If you are using DHCP (dynamically assigned IP address) you don't have to worry about editing this file. It has been found that if you don't make the following changes to the hosts file, the multicast beacon and AGServiceManager will not work correctly. To edit the file /etc/hosts, type vi /etc/hosts. Make sure you are the super-user while doing this. If your hosts file looks similar to this: 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 Your IP Address machinename.domain.name machinename Change it to read: Your IP Address machinename.domain.name machinename 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 Save and exit by hitting the "esc" key then entering :wq. Example file might look like: 111.222.111.222 jastest.cqu.edu.au jastest 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 Hope this helps. Cheers, Jason. -----Original Message----- From: Don McLane [mailto:dmcl...@u.washington.edu] Sent: Wednesday, 8 April 2009 10:03 AM To: ag-tech Subject: Re: [AG-TECH] AGServiceManager.py uses lo instead of eth0 I think I'm having the same problem. But won't this solution only work if you have a static IP address (or your dhcp server gives you the same address every time)? Seems like I could specify a hostname in /etc/network/interfaces like: auto eth0 iface eth0 inet dhcp hostname eth0name But that doesn't seem to work. Don James Miller wrote: > Yep, that was it... thanks! > > Christoph Willing wrote: >> >> On 14/02/2009, at 2:41 AM, James Miller wrote: >> >>> I am doing a quick upgrade of my capture machine running Ubuntu 8.10 >>> and I installed the accessgrid3.2 package from the Univ of >>> Queensland vislab source. I've never had problems with past >>> packages on previous versions of ubuntu. >>> >>> However, when I run AGServiceManager.py in a terminal, it's trying >>> to use the loopback address instead of eth0. >> >> James, >> >> What does your /etc/hosts file look like? On a machine named >> "mymachine" using dhcp, that file will begin with something like: >> 127.0.0.1 localhost.localdomain localhost >> 127.0.1.1 mymachine >> >> Try changing it so that the real IP address of mymachine and fully >> qualified domain name is in there, commenting out or removing the >> exisiting line with the machine's name e.g. >> 127.0.0.1 localhost.localdomain localhost >> #127.0.1.1 mymachine >> 123.45.67.89 mymachine.somedomain.xyz mymachine >> >> >> chris >> >> >> Christoph Willing +61 7 3365 8316 >> QCIF Access Grid Manager >> University of Queensland
