No problem; just saw the part where it was use the wizard or do it manually, and that's the manual approach. We'll help figure out your problem and get things working...
--Ivan > -----Original Message----- > From: Mike Weaver [mailto:wea...@er.doe.gov] > Sent: Wednesday, April 14, 2004 8:50 AM > To: jud...@mcs.anl.gov; ag-t...@mcs.anl.gov; 'Randy Groves' > Subject: Re: [AG-TECH] Node Setup Wizard problems > > Yes, I've read it, but using NodeManagement.py to add the > audio & video machines using the Add Service Manager dialog > doesn't work either as I mentioned in my last post. I > attached my logs to that post, but the agsm.log & agns.log > files are empty. > > Believe me, I understand how busy you guys are and I don't > post for assistance unless I've exhausted all avenues of research :) > > Thanks, and I'll keep plugging away at it. > > Mike > > ----- Original Message ----- > From: "Ivan R. Judson" <jud...@mcs.anl.gov> > To: "'Mike Weaver'" <wea...@er.doe.gov>; > <ag-t...@mcs.anl.gov>; "'Randy Groves'" <randy.gro...@boeing.com> > Sent: Wednesday, April 14, 2004 09:29 > Subject: RE: [AG-TECH] Node Setup Wizard problems > > > > > > Not to sound flippant, but have you read the existing docs? > > > > > http://www-unix.mcs.anl.gov/fl/research/accessgrid/documentati > on/RoomBasedNo > > de-HowTo/RoomBasedNode-HowTo.html > > > > Looks like that is what you both want. > > > > --Ivan > > > > > -----Original Message----- > > > From: owner-ag-t...@mcs.anl.gov > > > [mailto:owner-ag-t...@mcs.anl.gov] On Behalf Of Mike Weaver > > > Sent: Wednesday, April 14, 2004 5:03 AM > > > To: ag-t...@mcs.anl.gov; Randy Groves > > > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > > > Ditto! > > > > > > ----- Original Message ----- > > > From: "Randy Groves" <randy.gro...@boeing.com> > > > To: <ag-t...@mcs.anl.gov> > > > Sent: Wednesday, April 14, 2004 02:21 > > > Subject: Re: [AG-TECH] Node Setup Wizard problems > > > > > > > > > > I don't remember, but aren't there instructions (or is it not > > > possible?) > > > > for setting up a multiple machine node WITHOUT the Node > > > Setup Wizard? > > > I'm > > > > running into similar problems. Time constraints dictate > > > just getting > > > this > > > > set up - whether I use the wizard or not. > > > > > > > > -randy > > > > > > > > At 12:16 PM 4/13/2004, Thomas D. Uram wrote: > > > > >Hi Mike: > > > > > > > > > >Can you try configuring your node using > NodeManagement.py? This > > > should > > > > >provide additional info about the problem you're > having, possibly > > > within > > > > >NodeManagement itself, and probably in the log files (agns.log, > > > agsm.log, > > > > >AGService.log). This way, you can get your node set up, and we > can > > > > >understand the problem that the node setup wizard is > > > running into and > > > fix it. > > > > > > > > > >Let me know what happens, and send your log files > along if things > > > don't > > > > >work out. > > > > > > > > > >Thanks, > > > > > > > > > >Tom > > > > > > > > > > > > > > >Mike Weaver wrote: > > > > > > > > > >>I installed all prerequisites and AGTK 2.1.2 on my room node > > > (Display: > > > > >>Win2K, Audio:RHL 7.3, Video: RHL 7.3) and imported my > > > certificate to > > > all > > > > >>3 machines. I ran AGServiceManager.py on all > machines and then > > > > >>NodeSetupWizard.pyw from the (W2K) Display machine. When it > tries > > > to > > > > >>connect to the Video Capture machine, it fails. All > systems are > > > > >>time-sync'ed and DNS-resolvable (each can ping the > others). All > > > certs > > > > >>(Globus & ANL CA and my ID) look fine on machines. > > > > >> > > > > >>I see the AGServiceManager running on the video machine > > > and tcpdump > > > > >>shows traffic in both directions when the display machine > attempts > > > to > > > > >>connect, but it still fails. The agsm.log file on the > > > video machine > > > is > > > > >>empty even with the --debug option. The agsm.log file on the > > > display > > > > >>machine is also empty. The NodeSetupWizard.log on the Display > > > machine > > > > >>says: > > > > >> > > > > >>04/13/04 12:32:52 1728 AG.NodeSetupWizard > nodesetupwizard.pyw:332 > > > INFO > > > > >>NodeSetupWizard:VideoCaptureWindow:Validate: Service > > > manager is not > > > > >>started > > > > >> > > > > >>Any advise would be appreciated. > > > > >> > > > > >>Mike > > > > >> > > > > >>-- > > > > >>Mike Weaver > > > > >>Sr. Network Administrator > > > > >>SC-31/Germantown Building > > > > >>US Department of Energy > > > > >>1000 Independence Avenue, SW > > > > >>Washington, D.C. 20585-1290 > > > > >>Voice: 301-903-0072 > > > > >>Fax: 301-528-2701 > > > > >>Email: wea...@er.doe.gov > > > > >> > > > > >> > > > > >> > > > > > > > > > > > > > > > > > > > > >
