Ditto! ----- Original Message ----- From: "Randy Groves" <randy.gro...@boeing.com> To: <ag-t...@mcs.anl.gov> Sent: Wednesday, April 14, 2004 02:21 Subject: Re: [AG-TECH] Node Setup Wizard problems
> I don't remember, but aren't there instructions (or is it not possible?) > for setting up a multiple machine node WITHOUT the Node Setup Wizard? I'm > running into similar problems. Time constraints dictate just getting this > set up - whether I use the wizard or not. > > -randy > > At 12:16 PM 4/13/2004, Thomas D. Uram wrote: > >Hi Mike: > > > >Can you try configuring your node using NodeManagement.py? This should > >provide additional info about the problem you're having, possibly within > >NodeManagement itself, and probably in the log files (agns.log, agsm.log, > >AGService.log). This way, you can get your node set up, and we can > >understand the problem that the node setup wizard is running into and fix it. > > > >Let me know what happens, and send your log files along if things don't > >work out. > > > >Thanks, > > > >Tom > > > > > >Mike Weaver wrote: > > > >>I installed all prerequisites and AGTK 2.1.2 on my room node (Display: > >>Win2K, Audio:RHL 7.3, Video: RHL 7.3) and imported my certificate to all > >>3 machines. I ran AGServiceManager.py on all machines and then > >>NodeSetupWizard.pyw from the (W2K) Display machine. When it tries to > >>connect to the Video Capture machine, it fails. All systems are > >>time-sync'ed and DNS-resolvable (each can ping the others). All certs > >>(Globus & ANL CA and my ID) look fine on machines. > >> > >>I see the AGServiceManager running on the video machine and tcpdump > >>shows traffic in both directions when the display machine attempts to > >>connect, but it still fails. The agsm.log file on the video machine is > >>empty even with the --debug option. The agsm.log file on the display > >>machine is also empty. The NodeSetupWizard.log on the Display machine > >>says: > >> > >>04/13/04 12:32:52 1728 AG.NodeSetupWizard nodesetupwizard.pyw:332 INFO > >>NodeSetupWizard:VideoCaptureWindow:Validate: Service manager is not > >>started > >> > >>Any advise would be appreciated. > >> > >>Mike > >> > >>-- > >>Mike Weaver > >>Sr. Network Administrator > >>SC-31/Germantown Building > >>US Department of Energy > >>1000 Independence Avenue, SW > >>Washington, D.C. 20585-1290 > >>Voice: 301-903-0072 > >>Fax: 301-528-2701 > >>Email: wea...@er.doe.gov > >> > >> > >> > > > >
