Downloaded and installed the 5.2.0.1 client yesterday afternoon. Install was on an Intel XP SP1 machine. This may or may not be a standard component on a corporate machine but like some other folks on the list I use my personal machine as one of the early test beds for new versions. I have Zone Alarm Pro version 4.01 installed. The TSM install went fine. During the install I selected the Open File and Image support features via the custom install as that was I was interested in seeing. After reboot Zone Alarm will not stay up. I did leave it down when it prompted for a restart long enough to go into the TSM GUI and look around. Found that since Zone Alarm doesn't initialize correctly now my network connections were not working and I wasn't able to connect to the TSM server.
Went back and removed version 5.2 rebooted the system and Zone Alarm came up fine along with full network connectivity again. Re-installed 5.1.6.0 version of TSM and Zone Alarm is still running fine. So just a heads up for anyone that may have Zone Alarm installed and thinking of going to 5.2 it would appear that something between TSM 5.2 and Zone Alarm Pro 4.1 don't get along very well. Haven't opened a PMR at this point as I was just going to run on my machine and thought I could slip it on in 5 minutes. Figure we are still a couple of months away from starting what I would call the real 5.2 deployment and at this point I don't have anytime to fool with. Curt Magura Lockheed Martin EIS Orlando Fla. 321-235-1203
