Well..... Got to give credit where credit is due. Absolutely fantastic support by Andy. Wouldn't it be nice if all vendors have an Andy or two on staff.
In case you didn't follow this thread I posted to the list more or less as an FYI that after I installed 5.2.0.1 that Zone Alarm started acting up on my machine. Andy suggested one thing which I tried and the results where the same. After that Andy followed up with the post below. Sure enough that took care of the issue. Everything is up and running both 5.2.0.1 and Zone Alarm Pro 4.0.1. In the event you are a Zone Alarm user and follow the instructions in the link below be aware that all settings are lost following the process mentioned. The newer versions of Zone Alarm have a backup and restore feature. I was able to restore (not TSM but Zone Alarm restore function) all of the config info) THANKS Andy for all or your help not only to me but to everyone on this list!!! Curt Magura Lockheed Martin EIS Orlando Fla. 321-235-1203 -----Original Message----- From: Andrew Raibeck [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 02, 2003 1:38 PM To: [EMAIL PROTECTED] Subject: Re: Fun Facts to Know for the 5.2.0.1 Client I can spell "Zone Alarm", and that is really the extent of my knowledge on this product. With that said, I did a little poking around on their web site, and came across this article: http://65.200.195.204/noHoldCust25/Prod_1/Articles55646/corruptlogs.html. Don't know whether that will help, but it's worth a shot... Let me know how you make out with this. Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] Internet e-mail: [EMAIL PROTECTED] The only dumb question is the one that goes unasked. The command line is your friend. "Good enough" is the enemy of excellence.
