Thanks for the answers. I was afraid that a redefinition of the library would be the answer. Otherwise I'll give it a go as soon as TSM is finished with it's daily maintenance tasks. Which will keep him busy for a few more hours.
I've opened a PMR at IBM too, maybe they come up with something else while TSM is busy. Regards, Kurt > -----Oorspronkelijk bericht----- > Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens Wanda > Prather > Verzonden: dinsdag 31 juli 2007 18:11 > Aan: [email protected] > Onderwerp: Re: [ADSM-L] Extend library capacity > > The document you reference is peculiar. It says the "server may have to > be restarted or the library audited or possibly redefined", but it doesn't > make clear the cases where it needs to be redefined. > > AFAIK, when you change the number of slots in a TSM SCSI library, you have > to delete the library and drive definitions and redefine them. > > Here's what I think you need to do: > > Check out your tapes with REMOVE=NO > Make a copy of your DEVCONFIG file > Delete your paths > delete your drives > delete your library > Use the commands in the copy of your DEVCONFIG file to recreate the > library and drive and path definitions. (leave the SERIAL # off the > define drive command, let TSM figure it out.) TSM will pick up the new > slots. > > CheCK YOUR tapes back in. > (You can make it easier by running a checkin for ALL tapes (search=yes) as > STATUS=SCRATch. TSM will skip those that shouldn't be scratch. Then run > a second checkin for all tapes status=PRIVATE. > > Anybody got a different opinion? > > Wanda > > > > > > > > > > Hello, > > > > I've got the following setup: > > > > TSM server 5.4.0.3 on AIX5.3 TL5 (Extended Edition) > > Adic i2000 library > > > > The capacity of the library was extended from 500 to 600 slots by > > adding a license key. TSM was restarted afterwards and an audit of the > > ibrary was done , but TSM still only saw 500 instead of 600 slots. > > According to the following note, this is all that should be done: > > > > http://www-1.ibm.com/support/docview.wss?%20%20%20%20%20rs=663&context=S > > SGSG7&dc=D600&dc=DB520&dc=DB530&dc=D700&dc=DB500&dc=DB540&dc=DB510&dc=DB > > 550&q1=library+AND+change&uid=swg21203271&loc=en_US&cs=utf-8&lang=en > > > > The library and TSM server were rebooted too, but TSM still only sees > > 500 slots instead of 600 slots. > > > > What else should be done so that TSM detects the new added library > > slots? > > > > Thanks in advance, > > Kurt > > > > *** Disclaimer *** > > > > Vlaamse Radio- en Televisieomroep > > Auguste Reyerslaan 52, 1043 Brussel > > > > nv van publiek recht > > BTW BE 0244.142.664 > > RPR Brussel > > http://www.vrt.be/disclaimer > > > > *** Disclaimer *** Vlaamse Radio- en Televisieomroep Auguste Reyerslaan 52, 1043 Brussel nv van publiek recht BTW BE 0244.142.664 RPR Brussel http://www.vrt.be/disclaimer
