I've got it solved finally. The new added slots on the physical library were not yet allocated to the logical partition TSM is using. Which explains why TSM didn't find them.
A simple restart of TSM did discover the new added slots afterwards. Mvg, Kurt > -----Oorspronkelijk bericht----- > Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens Baker, > Jane > Verzonden: woensdag 1 augustus 2007 9:41 > Aan: [email protected] > Onderwerp: Re: [ADSM-L] Extend library capacity > > We found when we changed the library config (only logically) they told > us to re-configure, library defs, drives and paths but we didn't need > to. > > We did need to run the 'update library serial=autodetect' to get it to > find it's new serial number as it is somehow linked to the slot number > or numbers??? > > Hope you get it resolved soon! > > Jane. > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of > BEYERS Kurt > Sent: 01 August 2007 08:30 > To: [email protected] > Subject: Re: [ADSM-L] Extend library capacity > > Thanks for the answers. > > I was afraid that a redefinition of the library would be the answer. > Otherwise I'll give it a go as soon as TSM is finished with it's daily > maintenance tasks. Which will keep him busy for a few more hours. > > I've opened a PMR at IBM too, maybe they come up with something else > while TSM is busy. > > Regards, > Kurt > > > -----Oorspronkelijk bericht----- > > Van: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Namens > Wanda > > Prather > > Verzonden: dinsdag 31 juli 2007 18:11 > > Aan: [email protected] > > Onderwerp: Re: [ADSM-L] Extend library capacity > > > > The document you reference is peculiar. It says the "server may have > to > > be restarted or the library audited or possibly redefined", but it > doesn't > > make clear the cases where it needs to be redefined. > > > > AFAIK, when you change the number of slots in a TSM SCSI library, you > have > > to delete the library and drive definitions and redefine them. > > > > Here's what I think you need to do: > > > > Check out your tapes with REMOVE=NO > > Make a copy of your DEVCONFIG file > > Delete your paths > > delete your drives > > delete your library > > Use the commands in the copy of your DEVCONFIG file to recreate the > > library and drive and path definitions. (leave the SERIAL # off the > > define drive command, let TSM figure it out.) TSM will pick up the > new > > slots. > > > > CheCK YOUR tapes back in. > > (You can make it easier by running a checkin for ALL tapes > (search=yes) as > > STATUS=SCRATch. TSM will skip those that shouldn't be scratch. Then > run > > a second checkin for all tapes status=PRIVATE. > > > > Anybody got a different opinion? > > > > Wanda > > > > > > > > > > > > > > > > > > > Hello, > > > > > > I've got the following setup: > > > > > > TSM server 5.4.0.3 on AIX5.3 TL5 (Extended Edition) > > > Adic i2000 library > > > > > > The capacity of the library was extended from 500 to 600 slots by > > > adding a license key. TSM was restarted afterwards and an audit of > the > > > ibrary was done , but TSM still only saw 500 instead of 600 slots. > > > According to the following note, this is all that should be done: > > > > > > > http://www-1.ibm.com/support/docview.wss?%20%20%20%20%20rs=663&context=S > > > > SGSG7&dc=D600&dc=DB520&dc=DB530&dc=D700&dc=DB500&dc=DB540&dc=DB510&dc=DB > > > 550&q1=library+AND+change&uid=swg21203271&loc=en_US&cs=utf-8&lang=en > > > > > > The library and TSM server were rebooted too, but TSM still only > sees > > > 500 slots instead of 600 slots. > > > > > > What else should be done so that TSM detects the new added library > > > slots? > > > > > > Thanks in advance, > > > Kurt > > > > > > *** Disclaimer *** > > > > > > Vlaamse Radio- en Televisieomroep > > > Auguste Reyerslaan 52, 1043 Brussel > > > > > > nv van publiek recht > > > BTW BE 0244.142.664 > > > RPR Brussel > > > http://www.vrt.be/disclaimer > > > > > > > *** Disclaimer *** > > Vlaamse Radio- en Televisieomroep > Auguste Reyerslaan 52, 1043 Brussel > > nv van publiek recht > BTW BE 0244.142.664 > RPR Brussel > http://www.vrt.be/disclaimer > > > > > > > Please check that this email is addressed to you. If not, you should > delete it immediately as its contents may be confidential and its > disclosure, copying or distribution unlawful. > > C. & J. Clark International Limited takes steps to prevent the > transmission of electronic viruses but responsibility for screening > incoming messages and the risk of such transmission lies with the > recipient. > > C. & J. Clark International Limited Trading as Clarks Registered in > England number 141015. > Registered office 40 High Street, Street, Somerset. BA16 0EQ. England. > > This message has been scanned for viruses by BlackSpider MailControl - > www.blackspider.com *** Disclaimer *** Vlaamse Radio- en Televisieomroep Auguste Reyerslaan 52, 1043 Brussel nv van publiek recht BTW BE 0244.142.664 RPR Brussel http://www.vrt.be/disclaimer
