No. Going to do this on Calix E7-2s - We already have some of them in place, we pay Calix for support and software anyway, and the GPON-4 cards have 4 10G ports on them so we don't need to change much or spare something new. If we were just going to do this, I'd probably try FS just to avoid having to pay for software/support.
On Tue, Jul 3, 2018 at 12:00 PM, Adam Moffett <[email protected]> wrote: > Carl, > > Are you using FS.com switches? > > -Adam > > > > On 7/3/2018 11:49 AM, Carl Peterson wrote: > > > After moving most of our network over to VPLS, I'm working on pushing 10G > further into the network. It doesn't make a lot of sense to do this with > routers (cost & power) and since we use a lot of Calix gear for our GPON > and already have some of it in place it makes sense to me to just set up a > 10G ring and hang routers off of that where we need them. A couple of the > legs are going to be wireless 10G links for now so I'm looking for feedback > on G.8032v2 vs ERPS rings with wireless paths. > > Going to be running ~20-30 Service VLANs with multiple CVLANS and 20-30 > other single tagged VLANs over the ring (router to router, dedicated links, > etc). The only drawback I see is the inability to do traffic engineering > the way we an with MPLS VPLS but I'll still have that with the transport to > the core ring. > > Any gotchas I should look for? Issues with wireless? benefits of one vs > the other? > > > > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
