https://www.theruststore.com/Sprayable-Rust-Converter-Gallon-P332.aspx
-- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ----- Original Message ----- From: [email protected] To: "AnimalFarm Microwave Users Group" <[email protected]> Sent: Thursday, July 26, 2018 9:18:33 AM Subject: Re: [AFMUG] OT New YouTube Video I really don’t want to back out tight sheet metal screws. They may be rusted in but even if they are not, they never go in as tight and secure the second time. Plus I think it is more work than just hitting them all with a shot of paint. I had to remove the rust stains no matter what. From: Jason McKemie Sent: Wednesday, July 25, 2018 10:59 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT New YouTube Video Is it not possible to just back the screws out and replace them with something stainless or galvanized? On Wednesday, July 25, 2018, Chuck McCown < [email protected] > wrote: A bit off topic, but I figured while I was solving the problem, I may as well share. https://youtu.be/ECauzd4bIlM -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
