Wish I would have had some of this to try.
-----Original Message-----
From: Christopher Tyler
Sent: Thursday, July 26, 2018 8:48 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] OT New YouTube Video
https://www.theruststore.com/Sprayable-Rust-Converter-Gallon-P332.aspx
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
----- Original Message -----
From: [email protected]
To: "AnimalFarm Microwave Users Group" <[email protected]>
Sent: Thursday, July 26, 2018 9:18:33 AM
Subject: Re: [AFMUG] OT New YouTube Video
I really don’t want to back out tight sheet metal screws. They may be rusted
in but even if they are not, they never go in as tight and secure the second
time. Plus I think it is more work than just hitting them all with a shot of
paint.
I had to remove the rust stains no matter what.
From: Jason McKemie
Sent: Wednesday, July 25, 2018 10:59 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] OT New YouTube Video
Is it not possible to just back the screws out and replace them with
something stainless or galvanized?
On Wednesday, July 25, 2018, Chuck McCown < [email protected] > wrote:
A bit off topic, but I figured while I was solving the problem, I may as
well share.
https://youtu.be/ECauzd4bIlM
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
